From: Daniel Byrne <daniel1.byrne@intel.com>
To: Vinod Koul <vkoul@kernel.org>, Dave Jiang <dave.jiang@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>, Dan Williams <djbw@kernel.org>,
Vinicius Costa Gomes <vinicius.gomes@intel.com>,
Frank Li <Frank.Li@kernel.org>,
Herbert Xu <herbert@gondor.apana.org.au>,
Tom Zanussi <tom.zanussi@linux.intel.com>,
Kristen Accardi <kristen.c.accardi@intel.com>,
dmaengine@vger.kernel.org, linux-crypto@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH 12/17] dmaengine: idxd: hold device commands off while the reset re-creates its interrupts
Date: Mon, 19 Oct 2026 08:06:25 -0700 [thread overview]
Message-ID: <20261019150630.4026341-13-daniel1.byrne@intel.com> (raw)
In-Reply-To: <20261019150630.4026341-1-daniel1.byrne@intel.com>
The re-probe after a reset frees the misc interrupt and the MSI-X
vectors and requests them again. A device command whose completion
interrupt arrives in between is never completed, so its owner times
out and fences the device that was just reset, and the rebind in
idxd_reset_done() then fails.
Wait for the running command before the vectors are freed, since its
interrupt still arrives, and then hold IDXD_FLAG_CMD_RUNNING without an
owner until the interrupts are back, so that commands issued meanwhile
wait as they wait for any running command. A halt's recovery may forget
the hold, so it is released only if no newer command owns the state.
Assisted-by: Claude:claude-opus-5-5
Assisted-by: Claude:claude-fable-5-1
Signed-off-by: Daniel Byrne <daniel1.byrne@intel.com>
---
drivers/dma/idxd/device.c | 44 +++++++++++++++++++++++++++++++++++++++
drivers/dma/idxd/idxd.h | 2 ++
drivers/dma/idxd/init.c | 10 +++++++++
3 files changed, 56 insertions(+)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index d3b95593a686..222c201669bd 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -724,6 +724,50 @@ void idxd_cmd_reset_state(struct idxd_device *idxd)
spin_unlock_irqrestore(&idxd->cmd_lock, flags);
}
+/*
+ * Hold device commands off while the re-probe after a reset frees the
+ * interrupts and requests them again. A command whose completion
+ * interrupt comes while the misc vector is gone is never completed, and
+ * its owner would time out and fence the device that was just reset.
+ * The running command, if any, is waited for first: its owner gives up
+ * within its timeout, and the misc vector still takes its interrupt.
+ * RUNNING is then held without an owner, and new commands wait for it
+ * as for any running command. Returns false, holding nothing, when a
+ * command timed out, since commands then fail fast anyway.
+ */
+bool idxd_cmd_hold(struct idxd_device *idxd, u32 *seq)
+{
+ bool held = false;
+
+ spin_lock_irq(&idxd->cmd_lock);
+ wait_event_lock_irq(idxd->cmd_waitq,
+ !test_bit(IDXD_FLAG_CMD_RUNNING, &idxd->flags) ||
+ test_bit(IDXD_FLAG_CMD_TIMEDOUT, &idxd->flags),
+ idxd->cmd_lock);
+ if (!test_bit(IDXD_FLAG_CMD_RUNNING, &idxd->flags)) {
+ __set_bit(IDXD_FLAG_CMD_RUNNING, &idxd->flags);
+ *seq = ++idxd->cmd_seq;
+ held = true;
+ }
+ spin_unlock_irq(&idxd->cmd_lock);
+ return held;
+}
+
+/*
+ * End a hold taken by idxd_cmd_hold(). A halt's recovery may have
+ * forgotten the hold meanwhile and let another command run, which then
+ * has an owner or a newer sequence number, and its state is left alone.
+ */
+void idxd_cmd_unhold(struct idxd_device *idxd, u32 seq)
+{
+ spin_lock_irq(&idxd->cmd_lock);
+ if (idxd->cmd_seq == seq && !idxd->cmd_done) {
+ __clear_bit(IDXD_FLAG_CMD_RUNNING, &idxd->flags);
+ wake_up(&idxd->cmd_waitq);
+ }
+ spin_unlock_irq(&idxd->cmd_lock);
+}
+
int idxd_device_enable(struct idxd_device *idxd)
{
struct device *dev = &idxd->pdev->dev;
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index c04a2855aa3f..9d88b0d82fee 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -794,6 +794,8 @@ int idxd_device_disable(struct idxd_device *idxd);
int idxd_device_reset(struct idxd_device *idxd);
void idxd_device_clear_state(struct idxd_device *idxd);
void idxd_cmd_reset_state(struct idxd_device *idxd);
+bool idxd_cmd_hold(struct idxd_device *idxd, u32 *seq);
+void idxd_cmd_unhold(struct idxd_device *idxd, u32 seq);
int idxd_device_config(struct idxd_device *idxd);
int idxd_device_drain_pasid(struct idxd_device *idxd, int pasid);
int idxd_device_load_config(struct idxd_device *idxd);
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index a037a6e76362..312b4670b3e8 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -1212,6 +1212,14 @@ int idxd_pci_probe_alloc(struct idxd_device *idxd, struct pci_dev *pdev,
}
if (!alloc_idxd) {
+ bool held;
+ u32 seq;
+
+ /*
+ * Commands complete through the misc interrupt, which is
+ * gone until it is requested again.
+ */
+ held = idxd_cmd_hold(idxd, &seq);
/* Release interrupts in the IDXD device. */
idxd_cleanup_interrupts(idxd);
@@ -1219,6 +1227,8 @@ int idxd_pci_probe_alloc(struct idxd_device *idxd, struct pci_dev *pdev,
rc = idxd_setup_interrupts(idxd);
if (rc)
dev_warn(dev, "IDXD interrupts failed to setup\n");
+ if (held)
+ idxd_cmd_unhold(idxd, seq);
}
dev_info(&pdev->dev, "Intel(R) Accelerator Device (v%x)\n",
--
2.43.0
next prev parent reply other threads:[~2026-10-19 15:14 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 15:06 [PATCH 00/17] [PATCH 00/17] dmaengine: idxd: fixes found by an in-kernel polling client Daniel Byrne
2026-10-19 15:06 ` [PATCH 01/17] dmaengine: idxd: don't queue EVL fault work for kernel WQs Daniel Byrne
2026-10-19 15:06 ` [PATCH 02/17] dmaengine: idxd: detach the user fault workqueue under the event log lock Daniel Byrne
2026-10-19 15:06 ` [PATCH 03/17] dmaengine: idxd: refuse a memcpy longer than the WQ max transfer size Daniel Byrne
2026-10-19 21:19 ` Frank Li
2026-10-19 15:06 ` [PATCH 04/17] dmaengine: idxd: list a new channel only once it is complete Daniel Byrne
2026-10-19 15:06 ` [PATCH 05/17] dmaengine: idxd: unbind the device driver before its work queues go away Daniel Byrne
2026-10-19 15:06 ` [PATCH 06/17] dmaengine: idxd: keep the interrupt handle across terminate_all Daniel Byrne
2026-10-19 15:06 ` [PATCH 07/17] dmaengine: idxd: bound device command waits and fail fast after a timeout Daniel Byrne
2026-10-19 15:06 ` [PATCH 08/17] dmaengine: idxd: compare the device disable status code whole Daniel Byrne
2026-10-19 15:06 ` [PATCH 09/17] dmaengine: idxd: quarantine terminate_all's descriptor slots until the device has drained Daniel Byrne
2026-10-19 15:06 ` [PATCH 10/17] dmaengine: idxd: return -ETIMEDOUT from drains and resets and leak what the device may still write Daniel Byrne
2026-10-19 15:06 ` [PATCH 11/17] dmaengine: idxd: disable the device before its work queues are unregistered Daniel Byrne
2026-10-19 15:06 ` Daniel Byrne [this message]
2026-10-19 15:06 ` [PATCH 13/17] dmaengine: idxd: fix the double free of a descriptor whose submission failed Daniel Byrne
2026-10-19 15:06 ` [PATCH 14/17] dmaengine: idxd: complete an iaa_crypto descriptor through its own driver on abort and flush Daniel Byrne
2026-10-19 15:06 ` [PATCH 15/17] dmaengine: idxd: flush the work queues on every halt type Daniel Byrne
2026-10-19 15:06 ` [PATCH 16/17] dmaengine: idxd: keep client callbacks on a halt flush and cancel resubmissions after a terminate Daniel Byrne
2026-10-19 15:06 ` [PATCH 17/17] dmaengine: idxd: run the interrupt-handle revoke under the queue lock Daniel Byrne
2026-10-19 19:09 ` [PATCH 00/17] [PATCH 00/17] dmaengine: idxd: fixes found by an in-kernel polling client Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261019150630.4026341-13-daniel1.byrne@intel.com \
--to=daniel1.byrne@intel.com \
--cc=Frank.Li@kernel.org \
--cc=dave.jiang@intel.com \
--cc=djbw@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=fenghua.yu@intel.com \
--cc=herbert@gondor.apana.org.au \
--cc=kristen.c.accardi@intel.com \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tom.zanussi@linux.intel.com \
--cc=vinicius.gomes@intel.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox