[PATCH 03/17] dmaengine: idxd: refuse a memcpy longer than the WQ max transfer size

[Daniel Byrne <daniel1.byrne@intel.com>]

idxd_dma_submit_memcpy() checks the length only against the device
limit from GENCAP. Since commit d7aad5550eca ("dmaengine: idxd: add
support for configurable max wq xfer size"), WQCFG is programmed with
the work queue's own max_transfer_size instead, and that is the limit
the hardware enforces. Since commit 92452a72ebdf ("dmaengine: idxd: set
defaults for wq configs"), that limit defaults to 2 MiB.

A copy longer than the work queue's limit is therefore accepted at prep
time and then fails in hardware with DSA_COMP_XFER_ERANGE. A client that
sets only tx->callback cannot see that error, so the copy looks
complete. Also check the work queue's limit, so that prep returns NULL
and the caller can fall back.

On a Granite Rapids DSA with the default 2 MiB work queue limit and a
device limit of 2 GiB, dmatest with norandom=1 and test_buf_size=4194304
reports a data error for every copy on v7.2: the destination is never
written, yet each copy completes. With this change the same test fails
at prep, and copies of 1 MiB and 2 MiB pass as before.

Fixes: d7aad5550eca ("dmaengine: idxd: add support for configurable max wq xfer size")
Cc: stable@vger.kernel.org # 5.10+
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Daniel Byrne <daniel1.byrne@intel.com>
---
 drivers/dma/idxd/dma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/idxd/dma.c b/drivers/dma/idxd/dma.c
index 9937b671f637..c116416e10e5 100644
--- a/drivers/dma/idxd/dma.c
+++ b/drivers/dma/idxd/dma.c
@@ -115,7 +115,8 @@ idxd_dma_submit_memcpy(struct dma_chan *c, dma_addr_t dma_dest,
 	if (wq->state != IDXD_WQ_ENABLED)
 		return NULL;
 
-	if (len > idxd->max_xfer_bytes)
+	/* The work queue's configured limit is what the hardware enforces. */
+	if (len > idxd->max_xfer_bytes || len > wq->max_xfer_bytes)
 		return NULL;
 
 	op_flag_setup(flags, &desc_flags);
-- 
2.43.0