* Re: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
From: Vinod Koul @ 2013-05-16 6:43 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel, linux-kernel, balbi, linux-usb, linux-crypto,
davem, herbert, arnd, linus.walleij, srinidhi.kasagar,
Dan Williams, Per Forlin, Rabin Vincent
In-Reply-To: <20130516070638.GC3269@gmail.com>
On Thu, May 16, 2013 at 08:06:38AM +0100, Lee Jones wrote:
> On Thu, 16 May 2013, Vinod Koul wrote:
>
> > On Wed, May 15, 2013 at 10:51:54AM +0100, Lee Jones wrote:
> > > STEDMA40_*_TO_* direction definitions are identical in all but name to
> > > the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not
> > > duplicating such things.
> > >
> > > Cc: Vinod Koul <vinod.koul@intel.com>
> > > Cc: Dan Williams <djbw@fb.com>
> > > Cc: Per Forlin <per.forlin@stericsson.com>
> > > Cc: Rabin Vincent <rabin@rab.in>
> > > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > Nice :)
>
> :)
>
> > 1) I dont see the STE macro getting removed, why do we need it
>
> They are removed later in the set, once their use has been removed
> from platform code and all the other drivers.
>
> > 2) last i checked the direction values had a bit idfference b/w what you are
> > using and what dmaengine defines, so hopefully that is taken care of..
>
> Yes, no problem.
>
> <place Ack here> ;)
Acked-by: Vinod Koul <vinod.koul@intel.com>
--
~Vinod
>
> --
> Lee Jones
> Linaro ST-Ericsson Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* Re: [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error
From: Vinod Koul @ 2013-05-16 6:42 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel, linux-kernel, balbi, linux-usb, linux-crypto,
davem, herbert, arnd, linus.walleij, srinidhi.kasagar
In-Reply-To: <1368611522-9984-11-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 10:51:33AM +0100, Lee Jones wrote:
> 'struct stedma40_half_channel_info's header comment says that it's
> called 'struct stedma40_chan_cfg'. Let's straighten that out.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
Acked-by: Vinod Koul <vinod.koul@intel.com>
--
~Vinod
> include/linux/platform_data/dma-ste-dma40.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
> index af0064e..288dc24 100644
> --- a/include/linux/platform_data/dma-ste-dma40.h
> +++ b/include/linux/platform_data/dma-ste-dma40.h
> @@ -86,7 +86,7 @@ enum stedma40_xfer_dir {
>
>
> /**
> - * struct stedma40_chan_cfg - dst/src channel configuration
> + * struct stedma40_half_channel_info - dst/src channel configuration
> *
> * @big_endian: true if the src/dst should be read as big endian
> * @data_width: Data width of the src/dst hardware
> --
> 1.7.10.4
>
^ permalink raw reply
* Re: [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information
From: Vinod Koul @ 2013-05-16 6:40 UTC (permalink / raw)
To: Lee Jones
Cc: linus.walleij, arnd, srinidhi.kasagar, linux-usb, linux-kernel,
balbi, herbert, linux-crypto, davem, linux-arm-kernel
In-Reply-To: <1368611522-9984-8-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 10:51:30AM +0100, Lee Jones wrote:
> Addresses are passed in from the client's driver via the invocation of
> dmaengine_slave_config(), so there's no need to fetch them from platform
> data too, hardwired or otherwise. This is a great step forward, as it
> elevates a large burden from platform data in the way of a look-up
> table.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
Good code size reduction, always a good template for code improvements
Acked-by: Vinod Koul <vinod.koul@intel.com>
--
~Vinod
> drivers/dma/ste_dma40.c | 51 ++++++++++-------------------------------------
> 1 file changed, 11 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index ba84df8..57a127e 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -1774,22 +1774,6 @@ static int d40_validate_conf(struct d40_chan *d40c,
> res = -EINVAL;
> }
>
> - if (conf->dir == STEDMA40_MEM_TO_PERIPH &&
> - d40c->base->plat_data->dev_tx[conf->dev_type] == 0 &&
> - d40c->runtime_addr == 0) {
> - chan_err(d40c, "Invalid TX channel address (%d)\n",
> - conf->dev_type);
> - res = -EINVAL;
> - }
> -
> - if (conf->dir == STEDMA40_PERIPH_TO_MEM &&
> - d40c->base->plat_data->dev_rx[conf->dev_type] == 0 &&
> - d40c->runtime_addr == 0) {
> - chan_err(d40c, "Invalid RX channel address (%d)\n",
> - conf->dev_type);
> - res = -EINVAL;
> - }
> -
> if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) {
> /*
> * DMAC HW supports it. Will be added to this driver,
> @@ -2327,14 +2311,10 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
> if (sg_next(&sg_src[sg_len - 1]) == sg_src)
> desc->cyclic = true;
>
> - if (direction != DMA_TRANS_NONE) {
> - dma_addr_t dev_addr = d40_get_dev_addr(chan, direction);
> -
> - if (direction == DMA_DEV_TO_MEM)
> - src_dev_addr = dev_addr;
> - else if (direction == DMA_MEM_TO_DEV)
> - dst_dev_addr = dev_addr;
> - }
> + if (direction == DMA_DEV_TO_MEM)
> + src_dev_addr = chan->runtime_addr;
> + else if (direction == DMA_MEM_TO_DEV)
> + dst_dev_addr = chan->runtime_addr;
>
> if (chan_is_logical(chan))
> ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
> @@ -2782,15 +2762,8 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> dst_maxburst = config->dst_maxburst;
>
> if (config->direction == DMA_DEV_TO_MEM) {
> - dma_addr_t dev_addr_rx =
> - d40c->base->plat_data->dev_rx[cfg->dev_type];
> -
> config_addr = config->src_addr;
> - if (dev_addr_rx)
> - dev_dbg(d40c->base->dev,
> - "channel has a pre-wired RX address %08x "
> - "overriding with %08x\n",
> - dev_addr_rx, config_addr);
> +
> if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
> dev_dbg(d40c->base->dev,
> "channel was not configured for peripheral "
> @@ -2805,15 +2778,8 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> dst_maxburst = src_maxburst;
>
> } else if (config->direction == DMA_MEM_TO_DEV) {
> - dma_addr_t dev_addr_tx =
> - d40c->base->plat_data->dev_tx[cfg->dev_type];
> -
> config_addr = config->dst_addr;
> - if (dev_addr_tx)
> - dev_dbg(d40c->base->dev,
> - "channel has a pre-wired TX address %08x "
> - "overriding with %08x\n",
> - dev_addr_tx, config_addr);
> +
> if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
> dev_dbg(d40c->base->dev,
> "channel was not configured for memory "
> @@ -2833,6 +2799,11 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> return -EINVAL;
> }
>
> + if (config_addr <= 0) {
> + dev_err(d40c->base->dev, "no address supplied\n");
> + return -EINVAL;
> + }
> +
> if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
> dev_err(d40c->base->dev,
> "src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
> --
> 1.7.10.4
>
^ permalink raw reply
* Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
From: Vinod Koul @ 2013-05-16 6:35 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, balbi-l0cyMroinI0,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-crypto-u79uwXL29TY76Z2rM5mHXA, davem-fT/PcQaiUtIeIZ0/mPfg9Q,
herbert-F6s6mLieUQo7FNHlEwC/lvQIK84fMopw, arnd-r2nGTMty4D4,
linus.walleij-0IS4wlFg1OjSUeElwK9/Pw,
srinidhi.kasagar-0IS4wlFg1OjSUeElwK9/Pw
In-Reply-To: <1368611522-9984-3-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Wed, May 15, 2013 at 10:51:25AM +0100, Lee Jones wrote:
> All configuration left in d40_phy_cfg() is runtime configurable and
> there is already a call into it from d40_runtime_config(), so let's
> rely on that.
>
> Acked-by: Vinod Koul <vnod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
That needs up update!
> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> drivers/dma/ste_dma40.c | 14 +++---
> drivers/dma/ste_dma40_ll.c | 101 +++++++++++++++++++++-----------------------
> drivers/dma/ste_dma40_ll.h | 3 +-
> 3 files changed, 58 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 759293e..b7fe46b 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -2043,6 +2043,14 @@ static int d40_config_memcpy(struct d40_chan *d40c)
> } else if (dma_has_cap(DMA_MEMCPY, cap) &&
> dma_has_cap(DMA_SLAVE, cap)) {
> d40c->dma_cfg = dma40_memcpy_conf_phy;
> +
> + /* Generate interrrupt at end of transfer or relink. */
> + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
> +
> + /* Generate interrupt on error. */
> + d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
> + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
> +
> } else {
> chan_err(d40c, "No memcpy\n");
> return -EINVAL;
> @@ -2496,9 +2504,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
> }
>
> pm_runtime_get_sync(d40c->base->dev);
> - /* Fill in basic CFG register values */
> - d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg,
> - &d40c->dst_def_cfg, chan_is_logical(d40c));
>
> d40_set_prio_realtime(d40c);
>
> @@ -2862,8 +2867,7 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> if (chan_is_logical(d40c))
> d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
> else
> - d40_phy_cfg(cfg, &d40c->src_def_cfg,
> - &d40c->dst_def_cfg, false);
> + d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
>
> /* These settings will take precedence later */
> d40c->runtime_addr = config_addr;
> diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> index 435a223..ab5a2a7 100644
> --- a/drivers/dma/ste_dma40_ll.c
> +++ b/drivers/dma/ste_dma40_ll.c
> @@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
>
> }
>
> -/* Sets up SRC and DST CFG register for both logical and physical channels */
> -void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
> - u32 *src_cfg, u32 *dst_cfg, bool is_log)
> +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
> {
> u32 src = 0;
> u32 dst = 0;
>
> - if (!is_log) {
> - /* Physical channel */
> - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
> - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> - /* Set master port to 1 */
> - src |= 1 << D40_SREG_CFG_MST_POS;
> - src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> -
> - if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> - src |= 1 << D40_SREG_CFG_PHY_TM_POS;
> - else
> - src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> - }
> - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
> - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> - /* Set master port to 1 */
> - dst |= 1 << D40_SREG_CFG_MST_POS;
> - dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> -
> - if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> - dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
> - else
> - dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
> - }
> - /* Interrupt on end of transfer for destination */
> - dst |= 1 << D40_SREG_CFG_TIM_POS;
> -
> - /* Generate interrupt on error */
> - src |= 1 << D40_SREG_CFG_EIM_POS;
> - dst |= 1 << D40_SREG_CFG_EIM_POS;
> -
> - /* PSIZE */
> - if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
> - src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> - src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
> - }
> - if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
> - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> - dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
> - }
> -
> - /* Element size */
> - src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
> - dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
> -
> - /* Set the priority bit to high for the physical channel */
> - if (cfg->high_priority) {
> - src |= 1 << D40_SREG_CFG_PRI_POS;
> - dst |= 1 << D40_SREG_CFG_PRI_POS;
> - }
> + if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
> + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> + /* Set master port to 1 */
> + src |= 1 << D40_SREG_CFG_MST_POS;
> + src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> +
> + if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> + src |= 1 << D40_SREG_CFG_PHY_TM_POS;
> + else
> + src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> + }
> + if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
> + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> + /* Set master port to 1 */
> + dst |= 1 << D40_SREG_CFG_MST_POS;
> + dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> +
> + if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> + dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
> + else
> + dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
> + }
> + /* Interrupt on end of transfer for destination */
> + dst |= 1 << D40_SREG_CFG_TIM_POS;
> +
> + /* Generate interrupt on error */
> + src |= 1 << D40_SREG_CFG_EIM_POS;
> + dst |= 1 << D40_SREG_CFG_EIM_POS;
> +
> + /* PSIZE */
> + if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
> + src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> + src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
> + }
> + if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
> + dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> + dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
> + }
> +
> + /* Element size */
> + src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
> + dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
> +
> + /* Set the priority bit to high for the physical channel */
> + if (cfg->high_priority) {
> + src |= 1 << D40_SREG_CFG_PRI_POS;
> + dst |= 1 << D40_SREG_CFG_PRI_POS;
> }
>
> if (cfg->src_info.big_endian)
> diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
> index fdde8ef..1b47312 100644
> --- a/drivers/dma/ste_dma40_ll.h
> +++ b/drivers/dma/ste_dma40_ll.h
> @@ -432,8 +432,7 @@ enum d40_lli_flags {
>
> void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
> u32 *src_cfg,
> - u32 *dst_cfg,
> - bool is_log);
> + u32 *dst_cfg);
>
> void d40_log_cfg(struct stedma40_chan_cfg *cfg,
> u32 *lcsp1,
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
From: Vinod Koul @ 2013-05-16 5:17 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel, linux-kernel, balbi, linux-usb, linux-crypto,
davem, herbert, arnd, linus.walleij, srinidhi.kasagar,
Dan Williams, Per Forlin, Rabin Vincent
In-Reply-To: <1368611522-9984-32-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 10:51:54AM +0100, Lee Jones wrote:
> STEDMA40_*_TO_* direction definitions are identical in all but name to
> the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not
> duplicating such things.
>
> Cc: Vinod Koul <vinod.koul@intel.com>
> Cc: Dan Williams <djbw@fb.com>
> Cc: Per Forlin <per.forlin@stericsson.com>
> Cc: Rabin Vincent <rabin@rab.in>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Nice :)
1) I dont see the STE macro getting removed, why do we need it
2) last i checked the direction values had a bit idfference b/w what you are
using and what dmaengine defines, so hopefully that is taken care of..
--
~Vinod
> ---
> drivers/dma/ste_dma40.c | 56 ++++++++++++++++++++++----------------------
> drivers/dma/ste_dma40_ll.c | 24 +++++++++----------
> 2 files changed, 40 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 08bc58a..483da16 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -78,7 +78,7 @@ static int dma40_memcpy_channels[] = {
> /* Default configuration for physcial memcpy */
> struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
> .mode = STEDMA40_MODE_PHYSICAL,
> - .dir = STEDMA40_MEM_TO_MEM,
> + .dir = DMA_MEM_TO_MEM,
>
> .src_info.data_width = STEDMA40_BYTE_WIDTH,
> .src_info.psize = STEDMA40_PSIZE_PHY_1,
> @@ -92,7 +92,7 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
> /* Default configuration for logical memcpy */
> struct stedma40_chan_cfg dma40_memcpy_conf_log = {
> .mode = STEDMA40_MODE_LOGICAL,
> - .dir = STEDMA40_MEM_TO_MEM,
> + .dir = DMA_MEM_TO_MEM,
>
> .src_info.data_width = STEDMA40_BYTE_WIDTH,
> .src_info.psize = STEDMA40_PSIZE_LOG_1,
> @@ -843,7 +843,7 @@ static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
> * that uses linked lists.
> */
> if (!(chan->phy_chan->use_soft_lli &&
> - chan->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM))
> + chan->dma_cfg.dir == DMA_DEV_TO_MEM))
> curr_lcla = d40_lcla_alloc_one(chan, desc);
>
> first_lcla = curr_lcla;
> @@ -1311,12 +1311,12 @@ static void d40_config_set_event(struct d40_chan *d40c,
> u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
>
> /* Enable event line connected to device (or memcpy) */
> - if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
> - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
> + if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
> + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
> __d40_config_set_event(d40c, event_type, event,
> D40_CHAN_REG_SSLNK);
>
> - if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM)
> + if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM)
> __d40_config_set_event(d40c, event_type, event,
> D40_CHAN_REG_SDLNK);
> }
> @@ -1774,7 +1774,7 @@ static int d40_validate_conf(struct d40_chan *d40c,
> res = -EINVAL;
> }
>
> - if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) {
> + if (conf->dir == DMA_DEV_TO_DEV) {
> /*
> * DMAC HW supports it. Will be added to this driver,
> * in case any dma client requires it.
> @@ -1905,11 +1905,11 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
> phys = d40c->base->phy_res;
> num_phy_chans = d40c->base->num_phy_chans;
>
> - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
> + if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
> log_num = 2 * dev_type;
> is_src = true;
> - } else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> + } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
> + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
> /* dst event lines are used for logical memcpy */
> log_num = 2 * dev_type + 1;
> is_src = false;
> @@ -1920,7 +1920,7 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
> event_line = D40_TYPE_TO_EVENT(dev_type);
>
> if (!is_log) {
> - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> + if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
> /* Find physical half channel */
> if (d40c->dma_cfg.use_fixed_channel) {
> i = d40c->dma_cfg.phy_channel;
> @@ -2068,10 +2068,10 @@ static int d40_free_dma(struct d40_chan *d40c)
> return -EINVAL;
> }
>
> - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM)
> + if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
> + d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
> is_src = false;
> - else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
> + else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
> is_src = true;
> else {
> chan_err(d40c, "Unknown direction\n");
> @@ -2133,10 +2133,10 @@ static bool d40_is_paused(struct d40_chan *d40c)
> goto _exit;
> }
>
> - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> + if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
> + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
> status = readl(chanbase + D40_CHAN_REG_SDLNK);
> - } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
> + } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
> status = readl(chanbase + D40_CHAN_REG_SSLNK);
> } else {
> chan_err(d40c, "Unknown direction\n");
> @@ -2387,12 +2387,12 @@ static void d40_set_prio_realtime(struct d40_chan *d40c)
> if (d40c->base->rev < 3)
> return;
>
> - if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
> - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
> + if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
> + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
> __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
>
> - if ((d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH) ||
> - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
> + if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) ||
> + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
> __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
> }
>
> @@ -2423,11 +2423,11 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
>
> switch (D40_DT_FLAGS_DIR(flags)) {
> case 0:
> - cfg.dir = STEDMA40_MEM_TO_PERIPH;
> + cfg.dir = DMA_MEM_TO_DEV;
> cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
> break;
> case 1:
> - cfg.dir = STEDMA40_PERIPH_TO_MEM;
> + cfg.dir = DMA_DEV_TO_MEM;
> cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
> break;
> }
> @@ -2473,7 +2473,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
> d40_set_prio_realtime(d40c);
>
> if (chan_is_logical(d40c)) {
> - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
> + if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
> d40c->lcpa = d40c->base->lcpa_base +
> d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
> else
> @@ -2746,12 +2746,12 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> if (config->direction == DMA_DEV_TO_MEM) {
> config_addr = config->src_addr;
>
> - if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
> + if (cfg->dir != DMA_DEV_TO_MEM)
> dev_dbg(d40c->base->dev,
> "channel was not configured for peripheral "
> "to memory transfer (%d) overriding\n",
> cfg->dir);
> - cfg->dir = STEDMA40_PERIPH_TO_MEM;
> + cfg->dir = DMA_DEV_TO_MEM;
>
> /* Configure the memory side */
> if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
> @@ -2762,12 +2762,12 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> } else if (config->direction == DMA_MEM_TO_DEV) {
> config_addr = config->dst_addr;
>
> - if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
> + if (cfg->dir != DMA_MEM_TO_DEV)
> dev_dbg(d40c->base->dev,
> "channel was not configured for memory "
> "to peripheral transfer (%d) overriding\n",
> cfg->dir);
> - cfg->dir = STEDMA40_MEM_TO_PERIPH;
> + cfg->dir = DMA_MEM_TO_DEV;
>
> /* Configure the memory side */
> if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
> diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> index ab5a2a7..121c0ce 100644
> --- a/drivers/dma/ste_dma40_ll.c
> +++ b/drivers/dma/ste_dma40_ll.c
> @@ -18,23 +18,23 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
> u32 l1 = 0; /* src */
>
> /* src is mem? -> increase address pos */
> - if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
> - cfg->dir == STEDMA40_MEM_TO_MEM)
> + if (cfg->dir == DMA_MEM_TO_DEV ||
> + cfg->dir == DMA_MEM_TO_MEM)
> l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS;
>
> /* dst is mem? -> increase address pos */
> - if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
> - cfg->dir == STEDMA40_MEM_TO_MEM)
> + if (cfg->dir == DMA_DEV_TO_MEM ||
> + cfg->dir == DMA_MEM_TO_MEM)
> l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS;
>
> /* src is hw? -> master port 1 */
> - if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
> - cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
> + if (cfg->dir == DMA_DEV_TO_MEM ||
> + cfg->dir == DMA_DEV_TO_DEV)
> l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS;
>
> /* dst is hw? -> master port 1 */
> - if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
> - cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
> + if (cfg->dir == DMA_MEM_TO_DEV ||
> + cfg->dir == DMA_DEV_TO_DEV)
> l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
>
> l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
> @@ -55,8 +55,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
> u32 src = 0;
> u32 dst = 0;
>
> - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
> - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> + if ((cfg->dir == DMA_DEV_TO_MEM) ||
> + (cfg->dir == DMA_DEV_TO_DEV)) {
> /* Set master port to 1 */
> src |= 1 << D40_SREG_CFG_MST_POS;
> src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> @@ -66,8 +66,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
> else
> src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> }
> - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
> - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> + if ((cfg->dir == DMA_MEM_TO_DEV) ||
> + (cfg->dir == DMA_DEV_TO_DEV)) {
> /* Set master port to 1 */
> dst |= 1 << D40_SREG_CFG_MST_POS;
> dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> --
> 1.7.10.4
>
^ permalink raw reply
* Re: [PATCH 33/39] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s
From: Vinod Koul @ 2013-05-16 5:13 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel, linux-kernel, balbi, linux-usb, linux-crypto,
davem, herbert, arnd, linus.walleij, srinidhi.kasagar,
Dan Williams, Per Forlin, Rabin Vincent
In-Reply-To: <1368611522-9984-34-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 10:51:56AM +0100, Lee Jones wrote:
> The aim is to make the code that little more readable.
>
> Cc: Vinod Koul <vinod.koul@intel.com>
> Cc: Dan Williams <djbw@fb.com>
> Cc: Per Forlin <per.forlin@stericsson.com>
> Cc: Rabin Vincent <rabin@rab.in>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Hopefully all the BIT conversion in the driver are done in this
--
~Vinod
> ---
> drivers/dma/ste_dma40_ll.c | 44 ++++++++++++++++++++++----------------------
> 1 file changed, 22 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> index 121c0ce..5ddd724 100644
> --- a/drivers/dma/ste_dma40_ll.c
> +++ b/drivers/dma/ste_dma40_ll.c
> @@ -20,28 +20,28 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
> /* src is mem? -> increase address pos */
> if (cfg->dir == DMA_MEM_TO_DEV ||
> cfg->dir == DMA_MEM_TO_MEM)
> - l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS;
> + l1 |= BIT(D40_MEM_LCSP1_SCFG_INCR_POS);
>
> /* dst is mem? -> increase address pos */
> if (cfg->dir == DMA_DEV_TO_MEM ||
> cfg->dir == DMA_MEM_TO_MEM)
> - l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS;
> + l3 |= BIT(D40_MEM_LCSP3_DCFG_INCR_POS);
>
> /* src is hw? -> master port 1 */
> if (cfg->dir == DMA_DEV_TO_MEM ||
> cfg->dir == DMA_DEV_TO_DEV)
> - l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS;
> + l1 |= BIT(D40_MEM_LCSP1_SCFG_MST_POS);
>
> /* dst is hw? -> master port 1 */
> if (cfg->dir == DMA_MEM_TO_DEV ||
> cfg->dir == DMA_DEV_TO_DEV)
> - l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
> + l3 |= BIT(D40_MEM_LCSP3_DCFG_MST_POS);
>
> - l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
> + l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS);
> l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS;
> l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS;
>
> - l1 |= 1 << D40_MEM_LCSP1_SCFG_EIM_POS;
> + l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS);
> l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
> l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS;
>
> @@ -58,39 +58,39 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
> if ((cfg->dir == DMA_DEV_TO_MEM) ||
> (cfg->dir == DMA_DEV_TO_DEV)) {
> /* Set master port to 1 */
> - src |= 1 << D40_SREG_CFG_MST_POS;
> + src |= BIT(D40_SREG_CFG_MST_POS);
> src |= D40_TYPE_TO_EVENT(cfg->dev_type);
>
> if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> - src |= 1 << D40_SREG_CFG_PHY_TM_POS;
> + src |= BIT(D40_SREG_CFG_PHY_TM_POS);
> else
> src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> }
> if ((cfg->dir == DMA_MEM_TO_DEV) ||
> (cfg->dir == DMA_DEV_TO_DEV)) {
> /* Set master port to 1 */
> - dst |= 1 << D40_SREG_CFG_MST_POS;
> + dst |= BIT(D40_SREG_CFG_MST_POS);
> dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
>
> if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> - dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
> + dst |= BIT(D40_SREG_CFG_PHY_TM_POS);
> else
> dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
> }
> /* Interrupt on end of transfer for destination */
> - dst |= 1 << D40_SREG_CFG_TIM_POS;
> + dst |= BIT(D40_SREG_CFG_TIM_POS);
>
> /* Generate interrupt on error */
> - src |= 1 << D40_SREG_CFG_EIM_POS;
> - dst |= 1 << D40_SREG_CFG_EIM_POS;
> + src |= BIT(D40_SREG_CFG_EIM_POS);
> + dst |= BIT(D40_SREG_CFG_EIM_POS);
>
> /* PSIZE */
> if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
> - src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> + src |= BIT(D40_SREG_CFG_PHY_PEN_POS);
> src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
> }
> if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
> - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> + dst |= BIT(D40_SREG_CFG_PHY_PEN_POS);
> dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
> }
>
> @@ -100,14 +100,14 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
>
> /* Set the priority bit to high for the physical channel */
> if (cfg->high_priority) {
> - src |= 1 << D40_SREG_CFG_PRI_POS;
> - dst |= 1 << D40_SREG_CFG_PRI_POS;
> + src |= BIT(D40_SREG_CFG_PRI_POS);
> + dst |= BIT(D40_SREG_CFG_PRI_POS);
> }
>
> if (cfg->src_info.big_endian)
> - src |= 1 << D40_SREG_CFG_LBE_POS;
> + src |= BIT(D40_SREG_CFG_LBE_POS);
> if (cfg->dst_info.big_endian)
> - dst |= 1 << D40_SREG_CFG_LBE_POS;
> + dst |= BIT(D40_SREG_CFG_LBE_POS);
>
> *src_cfg = src;
> *dst_cfg = dst;
> @@ -157,15 +157,15 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
>
> /* If this scatter list entry is the last one, no next link */
> if (next_lli == 0)
> - lli->reg_lnk = 0x1 << D40_SREG_LNK_PHY_TCP_POS;
> + lli->reg_lnk = BIT(D40_SREG_LNK_PHY_TCP_POS);
> else
> lli->reg_lnk = next_lli;
>
> /* Set/clear interrupt generation on this link item.*/
> if (term_int)
> - lli->reg_cfg |= 0x1 << D40_SREG_CFG_TIM_POS;
> + lli->reg_cfg |= BIT(D40_SREG_CFG_TIM_POS);
> else
> - lli->reg_cfg &= ~(0x1 << D40_SREG_CFG_TIM_POS);
> + lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS);
>
> /* Post link */
> lli->reg_lnk |= 0 << D40_SREG_LNK_PHY_PRE_POS;
> --
> 1.7.10.4
>
^ permalink raw reply
* Re: [PATCH 36/39] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
From: Vinod Koul @ 2013-05-16 5:05 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel, linux-kernel, balbi, linux-usb, linux-crypto,
davem, herbert, arnd, linus.walleij, srinidhi.kasagar,
Dan Williams, Per Forlin, Rabin Vincent
In-Reply-To: <1368611522-9984-37-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 10:51:59AM +0100, Lee Jones wrote:
> At this moment in time the memcpy channels which can be used by the D40
> are fixed, as each supported platform in Mainline uses the same ones.
> However, platforms do exist which don't follow this convention, so
> these will need to be tailored. Fortunately, these platforms will be DT
> only, so this change has very little impact on platform data.
>
> Cc: Vinod Koul <vinod.koul@intel.com>
> Cc: Dan Williams <djbw@fb.com>
> Cc: Per Forlin <per.forlin@stericsson.com>
> Cc: Rabin Vincent <rabin@rab.in>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
> ---
> .../devicetree/bindings/dma/ste-dma40.txt | 2 +
> drivers/dma/ste_dma40.c | 40 ++++++++++++++++----
> include/linux/platform_data/dma-ste-dma40.h | 2 +
> 3 files changed, 36 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
> index 2679a87..aa272d8 100644
> --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
> +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
> @@ -6,6 +6,7 @@ Required properties:
> - reg-names: Names of the above areas to use during resource look-up
> - interrupt: Should contain the DMAC interrupt number
> - #dma-cells: must be <3>
> +- memcpy-channels: Channels to be used for memcpy
>
> Optional properties:
> - dma-channels: Number of channels supported by hardware - if not present
> @@ -21,6 +22,7 @@ Example:
> interrupts = <0 25 0x4>;
>
> #dma-cells = <2>;
> + memcpy-channels = <56 57 58 59 60>;
> dma-channels = <8>;
> };
>
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 76c255f..ae462d3 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -58,6 +58,8 @@
> #define D40_ALLOC_PHY BIT(30)
> #define D40_ALLOC_LOG_FREE 0
>
> +#define D40_MEMCPY_MAX_CHANS 8
> +
> /* Reserved event lines for memcpy only. */
> #define DB8500_DMA_MEMCPY_EV_0 51
> #define DB8500_DMA_MEMCPY_EV_1 56
> @@ -522,6 +524,8 @@ struct d40_gen_dmac {
> * @phy_start: Physical memory start of the DMA registers.
> * @phy_size: Size of the DMA register map.
> * @irq: The IRQ number.
> + * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
> + * transfers).
> * @num_phy_chans: The number of physical channels. Read from HW. This
> * is the number of available channels for this driver, not counting "Secure
> * mode" allocated physical channels.
> @@ -565,6 +569,7 @@ struct d40_base {
> phys_addr_t phy_start;
> resource_size_t phy_size;
> int irq;
> + int num_memcpy_chans;
> int num_phy_chans;
> int num_log_chans;
> struct device_dma_parameters dma_parms;
> @@ -2938,7 +2943,7 @@ static int __init d40_dmaengine_init(struct d40_base *base,
> }
>
> d40_chan_init(base, &base->dma_memcpy, base->log_chans,
> - base->num_log_chans, ARRAY_SIZE(dma40_memcpy_channels));
> + base->num_log_chans, base->num_memcpy_chans);
>
> dma_cap_zero(base->dma_memcpy.cap_mask);
> dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
> @@ -3139,6 +3144,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
> struct d40_base *base = NULL;
> int num_log_chans = 0;
> int num_phy_chans;
> + int num_memcpy_chans;
> int clk_ret = -EINVAL;
> int i;
> u32 pid;
> @@ -3209,6 +3215,12 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
> else
> num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
>
> + /* The number of channels used for memcpy */
> + if (plat_data->num_of_memcpy_chans)
> + num_memcpy_chans = plat_data->num_of_memcpy_chans;
> + else
> + num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
> +
> num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
>
> dev_info(&pdev->dev,
> @@ -3216,7 +3228,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
> rev, res->start, num_phy_chans, num_log_chans);
>
> base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
> - (num_phy_chans + num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) *
> + (num_phy_chans + num_log_chans + num_memcpy_chans) *
> sizeof(struct d40_chan), GFP_KERNEL);
>
> if (base == NULL) {
> @@ -3226,6 +3238,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
>
> base->rev = rev;
> base->clk = clk;
> + base->num_memcpy_chans = num_memcpy_chans;
> base->num_phy_chans = num_phy_chans;
> base->num_log_chans = num_log_chans;
> base->phy_start = res->start;
> @@ -3469,12 +3482,8 @@ static int __init d40_of_probe(struct platform_device *pdev,
> struct device_node *np)
> {
> struct stedma40_platform_data *pdata;
> -
> - /*
> - * FIXME: Fill in this routine as more support is added.
> - * First platform enabled (u8500) doens't need any extra
> - * properties to run, so this is fairly sparce currently.
> - */
> + int num_memcpy = 0;
> + const const __be32 *list;
>
> pdata = devm_kzalloc(&pdev->dev,
> sizeof(struct stedma40_platform_data),
> @@ -3482,6 +3491,21 @@ static int __init d40_of_probe(struct platform_device *pdev,
> if (!pdata)
> return -ENOMEM;
>
> + list = of_get_property(np, "memcpy-channels", &num_memcpy);
> + num_memcpy /= sizeof(*list);
> +
> + if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
> + d40_err(&pdev->dev,
> + "Invalid number of memcpy channels specified (%d)\n",
> + num_memcpy);
> + return -EINVAL;
> + }
> + pdata->num_of_memcpy_chans = num_memcpy;
> +
> + of_property_read_u32_array(np, "memcpy-channels",
> + dma40_memcpy_channels,
> + num_memcpy);
> +
> pdev->dev.platform_data = pdata;
>
> return 0;
> diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
> index ceba6dc..1bb9b18 100644
> --- a/include/linux/platform_data/dma-ste-dma40.h
> +++ b/include/linux/platform_data/dma-ste-dma40.h
> @@ -132,6 +132,7 @@ struct stedma40_chan_cfg {
> * @num_of_soft_lli_chans: The number of channels that needs to be configured
> * to use SoftLLI.
> * @use_esram_lcla: flag for mapping the lcla into esram region
> + * @num_of_memcpy_chans: The number of channels reserved for memcpy.
> * @num_of_phy_chans: The number of physical channels implemented in HW.
> * 0 means reading the number of channels from DMA HW but this is only valid
> * for 'multiple of 4' channels, like 8.
> @@ -141,6 +142,7 @@ struct stedma40_platform_data {
> int *soft_lli_chans;
> int num_of_soft_lli_chans;
> bool use_esram_lcla;
> + int num_of_memcpy_chans;
> int num_of_phy_chans;
> };
>
> --
> 1.7.10.4
>
^ permalink raw reply
* Re: [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment
From: Vinod Koul @ 2013-05-16 5:18 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, balbi-l0cyMroinI0,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-crypto-u79uwXL29TY76Z2rM5mHXA, davem-fT/PcQaiUtIeIZ0/mPfg9Q,
herbert-F6s6mLieUQo7FNHlEwC/lvQIK84fMopw, arnd-r2nGTMty4D4,
linus.walleij-0IS4wlFg1OjSUeElwK9/Pw,
srinidhi.kasagar-0IS4wlFg1OjSUeElwK9/Pw, Dan Williams, Per Forlin,
Rabin Vincent
In-Reply-To: <1368611522-9984-36-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Wed, May 15, 2013 at 10:51:58AM +0100, Lee Jones wrote:
> Unsure of the author's intentions, rather than just removing the nop,
> we're replacing it with a comment containing the possible intention
> of the statement OR:ing with 0.
Would be worthwhile to check w/ Linus W on this (or check whom to blame)
--
~Vinod
>
> Cc: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Cc: Dan Williams <djbw-b10kYP2dOMg@public.gmane.org>
> Cc: Per Forlin <per.forlin-0IS4wlFg1OjSUeElwK9/Pw@public.gmane.org>
> Cc: Rabin Vincent <rabin-66gdRtMMWGc@public.gmane.org>
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> drivers/dma/ste_dma40_ll.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> index a035dfe..27b818d 100644
> --- a/drivers/dma/ste_dma40_ll.c
> +++ b/drivers/dma/ste_dma40_ll.c
> @@ -182,8 +182,10 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
> else
> lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS);
>
> - /* Post link */
> - lli->reg_lnk |= 0 << D40_SREG_LNK_PHY_PRE_POS;
> + /*
> + * Post link - D40_SREG_LNK_PHY_PRE_POS = 0
> + * Relink happens after transfer completion.
> + */
>
> return 0;
> }
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: linux-next: Tree for May 15 (crypto /crct10dif)
From: Xiong Zhou @ 2013-05-16 3:57 UTC (permalink / raw)
To: tim.c.chen, herbert
Cc: Stephen Rothwell, linux-next, linux-kernel, linux-crypto,
Randy Dunlap, jencce.kernel
In-Reply-To: <5193CCEC.7070909@infradead.org>
On Wed, 15 May 2013, Randy Dunlap wrote:
> On 05/14/13 20:26, Stephen Rothwell wrote:
> > Hi all,
> >
> > Changes since 20130514:
> >
>
> on x86_64:
>
> crypto/built-in.o: In function `chksum_digest':
> crct10dif.c:(.text+0x2789f): undefined reference to `crc_t10dif_generic'
> crypto/built-in.o: In function `chksum_finup':
> crct10dif.c:(.text+0x278c7): undefined reference to `crc_t10dif_generic'
> crypto/built-in.o: In function `chksum_update':
> crct10dif.c:(.text+0x278ef): undefined reference to `crc_t10dif_generic'
>
>
> CONFIG_CRYPTO_CRCT10DIF=y
> CONFIG_CRC_T10DIF=m
>
>
>
> Full randconfig file is attached.
>
>
> --
> ~Randy
>
just try.
From: Xiong Zhou <jencce.kernel@gmail.com>
Try to fix randconfig build error reported by Randy Dunlap:
on x86_64:
crypto/built-in.o: In function `chksum_digest':
crct10dif.c:(.text+0x2789f): undefined reference to `crc_t10dif_generic'
crypto/built-in.o: In function `chksum_finup':
crct10dif.c:(.text+0x278c7): undefined reference to `crc_t10dif_generic'
crypto/built-in.o: In function `chksum_update':
crct10dif.c:(.text+0x278ef): undefined reference to `crc_t10dif_generic'
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRC_T10DIF=m
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com>
---
crypto/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 25b5209..28655bc 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -378,6 +378,7 @@ config CRYPTO_CRC32_PCLMUL
config CRYPTO_CRCT10DIF
tristate "CRCT10DIF algorithm"
+ depends on CRC_T10DIF
select CRYPTO_HASH
help
CRC T10 Data Integrity Field computation is being cast as
^ permalink raw reply related
* Re: [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver
From: Fabio Baltieri @ 2013-05-15 20:14 UTC (permalink / raw)
To: Linus Walleij
Cc: Lee Jones,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Felipe Balbi, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-crypto-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <CACRpkdYjjDp+7hzGtAchyy3+5Vxc8jK5THGCETkAO_V9Hj9Ssw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Hello Linus,
On Wed, May 15, 2013 at 07:18:01PM +0200, Linus Walleij wrote:
> On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
>
> > For all ux500 based platforms the maximum number of end-points are used.
> > Move this knowledge into the driver so we can relinquish the burden from
> > platform data. This also removes quite a bit of complexity from the driver
> > and will aid us when we come to enable the driver for Device Tree.
> >
> > Cc: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> > Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > Acked-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > Acked-by: Fabio Baltieri <fabio.baltieri-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> I guess this stuff is dependent on the stuff Fabio has recently sent to
> Felipe for the ux500 musb DMA so these musb patches should
> primarily go through his tree.
Not really, I only sent some coding style fix for the dma driver, as
almost all of my work was in the usb phy files. I also checked my
latest series against Lee's tree and the two seems to merge without any
conflict, so as far as I'm concerned it's really up to you and Felipe.
Fabio
> It seems like the later changes to the platform code
> (arch/arm/mach-ux500) may be sufficiently orthogonal
> so it can be done out-of-order?
>
> I can't merge any of this without Felipes ACKs in any
> case.
>
> Yours,
> Linus Walleij
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Fabio Baltieri
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: linux-next: Tree for May 15 (crypto /crct10dif)
From: Randy Dunlap @ 2013-05-15 17:59 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, linux-crypto
In-Reply-To: <20130515132627.817585a3d9fb3a3e502eb586@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 558 bytes --]
On 05/14/13 20:26, Stephen Rothwell wrote:
> Hi all,
>
> Changes since 20130514:
>
on x86_64:
crypto/built-in.o: In function `chksum_digest':
crct10dif.c:(.text+0x2789f): undefined reference to `crc_t10dif_generic'
crypto/built-in.o: In function `chksum_finup':
crct10dif.c:(.text+0x278c7): undefined reference to `crc_t10dif_generic'
crypto/built-in.o: In function `chksum_update':
crct10dif.c:(.text+0x278ef): undefined reference to `crc_t10dif_generic'
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRC_T10DIF=m
Full randconfig file is attached.
--
~Randy
[-- Attachment #2: config-r2494 --]
[-- Type: text/plain, Size: 97736 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.10.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
CONFIG_RCU_NOCB_CPU_ZERO=y
# CONFIG_RCU_NOCB_CPU_ALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_ARCH_USES_NUMA_PROT_NONE=y
# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set
CONFIG_NUMA_BALANCING=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HOTPLUG=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
CONFIG_MODULE_SIG_SHA384=y
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha384"
CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
# CONFIG_KVM_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
CONFIG_MPSC=y
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MOVABLE_NODE=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ACPI is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
CONFIG_PCI_PASID=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not set
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=m
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=m
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_RDS=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=m
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
# CONFIG_L2TP_IP is not set
CONFIG_L2TP_ETH=y
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=y
CONFIG_LAPB=m
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=y
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=y
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
CONFIG_NETLINK_DIAG=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
# CONFIG_YAM is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
# CONFIG_MAC80211_RC_PID is not set
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""
#
# Some wireless drivers require a rate control algorithm
#
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
CONFIG_MAC80211_MLME_DEBUG=y
# CONFIG_MAC80211_STA_DEBUG is not set
CONFIG_MAC80211_HT_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
# CONFIG_MAC80211_PS_DEBUG is not set
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
# CONFIG_MAC80211_MHWMP_DEBUG is not set
# CONFIG_MAC80211_MESH_SYNC_DEBUG is not set
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=m
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
# CONFIG_CAIF_NETDEV is not set
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
CONFIG_NFC_PN544=m
# CONFIG_NFC_PN544_I2C is not set
# CONFIG_NFC_MICROREAD is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
# CONFIG_MTD_CFI_I1 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_TS5500=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_ESB2ROM is not set
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=y
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_SLRAM=m
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_DENALI=y
# CONFIG_MTD_NAND_DENALI_PCI is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_RICOH=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_INTEL_MID_PTI=y
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ATMEL_SSC=m
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
CONFIG_PCH_PHUB=m
CONFIG_USB_SWITCH_FSA9480=m
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_VMWARE_VMCI=y
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_NET is not set
CONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
CONFIG_MII=y
CONFIG_NET_TEAM=m
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
# CONFIG_NET_TEAM_MODE_RANDOM is not set
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_RIONET is not set
CONFIG_TUN=m
CONFIG_VETH=y
CONFIG_VIRTIO_NET=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=y
CONFIG_CAIF_VIRTIO=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_RING=y
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=m
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
CONFIG_NET_DSA_MV88E6123_61_65=m
# CONFIG_ETHERNET is not set
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM87XX_PHY=m
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
# CONFIG_USB_NET_NET1080 is not set
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
# CONFIG_ATH_CARDS is not set
CONFIG_B43=m
# CONFIG_B43_BCMA is not set
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
# CONFIG_B43_PHY_LP is not set
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
# CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not set
CONFIG_B43LEGACY_DMA_MODE=y
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
# CONFIG_BRCMFMAC is not set
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_PLX is not set
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
# CONFIG_IPW2100_MONITOR is not set
CONFIG_IPW2100_DEBUG=y
CONFIG_LIBIPW=m
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=m
# CONFIG_IWLDVM is not set
# CONFIG_IWLMVM is not set
#
# WARNING: iwlwifi is useless without IWLDVM or IWLMVM
#
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
CONFIG_IWLWIFI_DEVICE_TESTMODE=y
CONFIG_IWLWIFI_P2P=y
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
# CONFIG_IWLEGACY_DEBUGFS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
# CONFIG_P54_PCI is not set
CONFIG_P54_LEDS=y
# CONFIG_RT2X00 is not set
CONFIG_RTLWIFI=m
# CONFIG_RTLWIFI_DEBUG is not set
# CONFIG_RTL8192CE is not set
CONFIG_RTL8192SE=m
# CONFIG_RTL8192DE is not set
CONFIG_RTL8723AE=m
CONFIG_RTL8188EE=m
# CONFIG_RTL8192CU is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not set
# CONFIG_IEEE802154_DRIVERS is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
CONFIG_ISDN_CAPI_CAPI20=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
# CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
# CONFIG_HYSDN_CAPI is not set
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
# CONFIG_MISDN_HFCPCI is not set
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
# CONFIG_MISDN_SPEEDFAX is not set
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
# CONFIG_MISDN_NETJET is not set
CONFIG_MISDN_IPAC=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_ILI210X=m
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF50633_PMU is not set
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=m
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=m
CONFIG_ISI=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=m
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SCCNXP=m
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_PCH_UART=m
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_HVC_XEN_FRONTEND is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_NVRAM=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
# CONFIG_MWAVE is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=m
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_EG20T=m
CONFIG_I2C_INTEL_MID=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set
#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI clients
#
CONFIG_HSI_CHAR=m
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_BQ27X00_I2C is not set
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=m
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_SMB347=m
CONFIG_BATTERY_GOLDFISH=m
CONFIG_POWER_RESET=y
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_CPU_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=y
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
CONFIG_EUROTECH_WDT=y
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
# CONFIG_I6300ESB_WDT is not set
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
# CONFIG_HPWDT_NMI_DECODING is not set
# CONFIG_SC1200_WDT is not set
CONFIG_PC87413_WDT=y
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=m
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_XEN_WDT=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_CROS_EC is not set
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_HTC_PASIC3 is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_TPS6105X=m
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65217=m
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_FAN53555=m
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
# CONFIG_VIDEO_V4L2_INT_DEVICE is not set
CONFIG_DVB_CORE=m
# CONFIG_DVB_NET is not set
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
# CONFIG_VIDEO_FB_IVTV is not set
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
# CONFIG_VIDEO_ZORAN_LML33R10 is not set
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
# CONFIG_VIDEO_MXB is not set
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
# CONFIG_VIDEO_CX88_ALSA is not set
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
# CONFIG_DVB_BT8XX is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
# CONFIG_VIDEO_SAA7134_RC is not set
# CONFIG_VIDEO_SAA7134_DVB is not set
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_OSD is not set
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_MANTIS_CORE is not set
# CONFIG_DVB_NGENE is not set
CONFIG_DVB_DDBRIDGE=m
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_IR_I2C=m
#
# Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
# CONFIG_VIDEO_UDA1342 is not set
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_BT819=m
# CONFIG_VIDEO_BT856 is not set
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_SAA7191 is not set
CONFIG_VIDEO_TVP514X=m
# CONFIG_VIDEO_TVP5150 is not set
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_AK881X=m
#
# Camera sensor devices
#
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_VS6624=m
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_SR030PC30 is not set
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_AS3645A=m
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Miscelaneous helper chips
#
CONFIG_VIDEO_THS7303=m
CONFIG_VIDEO_M52790=m
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
CONFIG_MEDIA_TUNER_XC2028=m
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_XC4000 is not set
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_TUA9001=m
# CONFIG_MEDIA_TUNER_IT913X is not set
CONFIG_MEDIA_TUNER_R820T=m
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=m
# CONFIG_DVB_STV6110x is not set
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
# CONFIG_DVB_STV6110 is not set
CONFIG_DVB_STV0900=m
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
# CONFIG_DVB_TS2020 is not set
CONFIG_DVB_DS3000=m
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=m
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_HD29L2=m
CONFIG_DVB_STV0367=m
# CONFIG_DVB_CXD2820R is not set
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
CONFIG_DVB_DIB8000=m
# CONFIG_DVB_MB86A20S is not set
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
# CONFIG_DVB_IX2505V is not set
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
# CONFIG_DRM_GMA600 is not set
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_QXL is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_HDMI=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
CONFIG_FB_ARC=m
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=m
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=m
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=y
# CONFIG_FB_GOLDFISH is not set
CONFIG_FB_VIRTUAL=y
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=m
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_PCF50633=m
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
# CONFIG_SND_SEQ_HRTIMER_DEFAULT is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS5530=m
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
# CONFIG_SND_ECHO3G is not set
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_ICE1724=m
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
CONFIG_SND_RME96=m
# CONFIG_SND_RME9652 is not set
CONFIG_SND_SONICVIBES=m
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=m
# CONFIG_SND_USB_CAIAQ_INPUT is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
# CONFIG_SND_ISIGHT is not set
CONFIG_SND_SCS1X=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
# CONFIG_SND_PDAUDIOCF is not set
CONFIG_SND_SOC=m
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AD193X=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_ADAU1373=m
CONFIG_SND_SOC_ADAV80X=m
CONFIG_SND_SOC_ADS117X=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_AK4641=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_ALC5632=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CX20442=m
CONFIG_SND_SOC_JZ4740_CODEC=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_DA7210=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA732X=m
CONFIG_SND_SOC_DA9055=m
CONFIG_SND_SOC_DFBMCS320=m
CONFIG_SND_SOC_ISABELLE=m
CONFIG_SND_SOC_LM49453=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98095=m
CONFIG_SND_SOC_MAX9850=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA529=m
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320DAC33=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WL1273=m
CONFIG_SND_SOC_WM1250_EV1=m
CONFIG_SND_SOC_WM2000=m
CONFIG_SND_SOC_WM2200=m
CONFIG_SND_SOC_WM5100=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8955=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8983=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8988=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SND_SOC_WM8991=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM8995=m
CONFIG_SND_SOC_WM8996=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_WM9090=m
CONFIG_SND_SOC_LM4857=m
CONFIG_SND_SOC_MAX9768=m
CONFIG_SND_SOC_MAX9877=m
CONFIG_SND_SOC_MC13783=m
CONFIG_SND_SOC_ML26124=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_APPLEIR=y
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LENOVO_TPKBD=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PICOLCD_CIR is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_PS3REMOTE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y
# CONFIG_USB_DWC3_DEBUG is not set
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_DEBUG is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_ZIO is not set
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_ZTE=y
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_QT2=y
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_PHY is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
# CONFIG_MMC_USHC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP55XX_COMMON=m
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA9633=m
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_MC13783 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=m
CONFIG_LEDS_BLINKM=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_DECODE_MCE is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=m
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SCRUB_PAGES is not set
CONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_STAGING=y
CONFIG_ET131X=y
CONFIG_SLICOSS=m
# CONFIG_USBIP_CORE is not set
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
# CONFIG_ECHO is not set
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_BOND=m
# CONFIG_COMEDI_TEST is not set
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SKEL=m
# CONFIG_COMEDI_PCI_DRIVERS is not set
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
# CONFIG_COMEDI_NI_DAQ_DIO24_CS is not set
CONFIG_COMEDI_NI_LABPC_CS=m
# CONFIG_COMEDI_NI_MIO_CS is not set
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=m
# CONFIG_COMEDI_USBDUX is not set
# CONFIG_COMEDI_USBDUXFAST is not set
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_FC=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_ASUS_OLED=m
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_TRANZPORT=m
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
CONFIG_VT6655=m
CONFIG_VT6656=m
CONFIG_DX_SEP=m
#
# IIO staging drivers
#
#
# Accelerometers
#
#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
CONFIG_AD799X=m
CONFIG_AD799X_RING_BUFFER=y
#
# Analog digital bi-direction converters
#
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
# CONFIG_AD7152 is not set
CONFIG_AD7746=m
#
# Direct Digital Synthesis
#
#
# Digital gyroscope sensors
#
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=m
CONFIG_TSL2583=m
CONFIG_TSL2x7x=m
#
# Magnetometer sensors
#
CONFIG_SENSORS_HMC5843=m
#
# Active energy metering IC
#
CONFIG_ADE7854=m
# CONFIG_ADE7854_I2C is not set
#
# Resolver to digital converters
#
#
# Triggers - standalone
#
CONFIG_IIO_SYSFS_TRIGGER=m
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_WLAGS49_H2 is not set
CONFIG_WLAGS49_H25=m
CONFIG_FB_SM7XX=y
# CONFIG_CRYSTALHD is not set
CONFIG_FB_XGI=m
CONFIG_BCM_WIMAX=y
CONFIG_FT1000=y
# CONFIG_FT1000_USB is not set
# CONFIG_FT1000_PCMCIA is not set
#
# Speakup console speech
#
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_USB_WPAN_HCD=y
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_NET_VENDOR_SILICOM is not set
CONFIG_CED1401=y
# CONFIG_DGRP is not set
# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_MBOX_KFIFO_SIZE=256
CONFIG_MBOX_DATA_SIZE=4
CONFIG_IOMMU_SUPPORT=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
#
# Analog to digital converters
#
CONFIG_MAX1363=m
CONFIG_TI_ADC081C=m
#
# Amplifiers
#
#
# Hid Sensor IIO Common
#
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
CONFIG_AD5064=m
# CONFIG_AD5380 is not set
CONFIG_AD5446=m
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
#
# Digital gyroscope sensors
#
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
# CONFIG_ITG3200 is not set
#
# Inertial measurement units
#
CONFIG_INV_MPU6050_IIO=m
#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_SENSORS_TSL2563=m
# CONFIG_VCNL4000 is not set
#
# Magnetometer sensors
#
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
# CONFIG_NTB is not set
CONFIG_VME_BUS=m
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
# CONFIG_VME_TSI148 is not set
#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set
#
# VME Device Drivers
#
# CONFIG_VME_USER is not set
# CONFIG_PWM is not set
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=m
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_LOGFS=m
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_FTRACE=y
CONFIG_PSTORE_RAM=m
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=m
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_WORK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
CONFIG_DEBUG_KMEMLEAK_TEST=m
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MMC_REQUEST=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
# CONFIG_STACK_TRACER is not set
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_LOW_LEVEL_TRAP=y
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_NMI_SELFTEST=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_YAMA_STACKED=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_APPRAISE=y
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_YAMA=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="yama"
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=m
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=m
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_BLOWFISH_AVX2_X86_64=y
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
CONFIG_CRYPTO_TWOFISH_AVX2_X86_64=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_LZ4=m
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
^ permalink raw reply
* Re: [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver
From: Linus Walleij @ 2013-05-15 17:18 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-21-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> For all ux500 based platforms the maximum number of end-points are used.
> Move this knowledge into the driver so we can relinquish the burden from
> platform data. This also removes quite a bit of complexity from the driver
> and will aid us when we come to enable the driver for Device Tree.
>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: linux-usb@vger.kernel.org
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
I guess this stuff is dependent on the stuff Fabio has recently sent to
Felipe for the ux500 musb DMA so these musb patches should
primarily go through his tree.
It seems like the later changes to the platform code
(arch/arm/mach-ux500) may be sufficiently orthogonal
so it can be done out-of-order?
I can't merge any of this without Felipes ACKs in any
case.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it
From: Linus Walleij @ 2013-05-15 17:11 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR, Andreas Westin
In-Reply-To: <1368611522-9984-16-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> If we fail to prepare the ux500-cryp clock before enabling it the
> platform will fail to boot. Here we insure this happens.
>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: Andreas Westin <andreas.westin@stericsson.com>
> Cc: linux-crypto@vger.kernel.org
> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch also looks like -rc series stuff for the crypto tree.
BTW: these two clk_prepare_enable() patches are
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 11/39] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata
From: Linus Walleij @ 2013-05-15 17:05 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-12-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> DMA data width and packet size information is only required at channel
> configuration time. Any information passed from platform data is passed
> directly to the DMA40 driver to use during channel allocation, but these
> pieces of information are subsequently ignored by the driver, so we may
> as well remove them.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()
From: Linus Walleij @ 2013-05-15 17:09 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR, Andreas Westin
In-Reply-To: <1368611522-9984-14-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> The DMA controller currently takes configuration information from
> information passed though dma_channel_request(), but it shouldn't.
> Using the API, the DMA channel should only be configured during
> a dma_slave_config() call.
>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: Andreas Westin <andreas.westin@stericsson.com>
> Cc: linux-crypto@vger.kernel.org
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
I think I need to stop applying here and wait for an ACK from
Herbert on everything hitting drivers/crypto.
If I get Vinod's ACK for the previous patches I can send an
initial pull request on that and then follow up with the rest.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it
From: Linus Walleij @ 2013-05-15 17:07 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR, Andreas Westin
In-Reply-To: <1368611522-9984-13-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> If we fail to prepare the ux500-hash clock before enabling it the
> platform will fail to boot. Here we insure this happens.
>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: Andreas Westin <andreas.westin@stericsson.com>
> Cc: linux-crypto@vger.kernel.org
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch seems to be totally independent of the other stuff
in the patch series, and it even seems like an -rc fix to me
(I don't think the crypto device works without this).
This should go into the crypto tree?
Else please convince Herbert to give his ACK on this
before I apply it.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error
From: Linus Walleij @ 2013-05-15 17:04 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-11-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> 'struct stedma40_half_channel_info's header comment says that it's
> called 'struct stedma40_chan_cfg'. Let's straighten that out.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Patch tentatively applied waiting for Vinod's ACK.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 09/39] ARM: ux500: Remove DMA address look-up table
From: Linus Walleij @ 2013-05-15 17:03 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-10-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> DMA addresses are now passed as part of the dmaengine API by invoking
> dmaengine_slave_config(). So there's no requirement for the DMA40
> driver to look them up in a table provided by platform data. This
> method does not fit in well using Device Tree either.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Good riddance. Patch tentatively applied.
Awaiting Vinod's ACK for include/platform_data/*.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function
From: Linus Walleij @ 2013-05-15 16:56 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-9-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> Addresses are now stored in local data structures and are easy to
> obtain, thus a specialist function used to fetch them is now surplus
> to requirement.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Patch tentatively applied, waiting for Vinod's ACK.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information
From: Linus Walleij @ 2013-05-15 16:54 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-8-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> Addresses are passed in from the client's driver via the invocation of
> dmaengine_slave_config(), so there's no need to fetch them from platform
> data too, hardwired or otherwise. This is a great step forward, as it
> elevates a large burden from platform data in the way of a look-up
> table.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This should be the case even without patch 5 & 6 so patch tentatively
applied.
Waiting for Vinod's ACK on this though.
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 06/39] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading
From: Linus Walleij @ 2013-05-15 16:51 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Felipe Balbi, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-crypto-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-7-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> Now DMA DT bindings exist and are in use by he MMC and UART drivers, it
> should be possible to remove them from the auxdata structure. However,
> after doing so the drivers fail. Common clk is still reliant on the
> dev_name() call to do device name matching, which will fail due to the
> fact that Device Tree naming differs somewhat do the more traditional
> conventions.
>
> Reviewed-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cannot be applied due to dependency on 5/39.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 05/39] ARM: ux500: Stop passing MMC's platform data for Device Tree boots
From: Linus Walleij @ 2013-05-15 16:50 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Felipe Balbi, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-crypto-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David S. Miller, Herbert Xu, Vinod Koul, Linus WALLEIJ,
Arnd Bergmann, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-6-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> It was required to pass DMA channel configuration information to the
> MMC driver before the new DMA API was in place. Now that it is, and
> is fully compatible with Device Tree we can stop doing that.
>
> Reviewed-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
So since the use of dma_request_slave_channel() is not upstream,
I guess this will break DMA use (i.e slow down transfers!) on all
device tree boots?
I'd be happy to apply it once the MMCI patch is in linux-next
indicating there may just be a window in the merge period
where it falls back to IRQ mode, but I don't want to disable
DMA on DT boots for an entire kernel cycle just like that.
Not applied as of yet.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 04/39] ARM: ux500: Stop passing UART's platform data for Device Tree boots
From: Linus Walleij @ 2013-05-15 16:48 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Felipe Balbi, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-crypto-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-5-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> It was required to pass DMA channel configuration information to the
> UART driver before the new DMA API was in place. Now that it is, and
> is fully compatible with Device Tree we can stop doing that.
>
> Reviewed-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> arch/arm/mach-ux500/cpu-db8500.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
> index 38ebf2b..9b26fe2 100644
> --- a/arch/arm/mach-ux500/cpu-db8500.c
> +++ b/arch/arm/mach-ux500/cpu-db8500.c
> @@ -230,9 +230,9 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
> /* Requires call-back bindings. */
> OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
> /* Requires DMA bindings. */
> - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
> - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
> - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
> + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
> + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
> + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
> OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
> OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
> OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
OK dma_request_slave_channel() is upstream in the PL011 driver,
so applied!
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate
From: Linus Walleij @ 2013-05-15 16:44 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Rabin Vincent,
Linus WALLEIJ, Arnd Bergmann, Srinidhi KASAGAR, Per Forlin,
Dan Williams
In-Reply-To: <1368611522-9984-4-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> Using the dmaengine API, allocating and configuring a channel are two
> separate actions. Here we're removing logical channel configuration from
> the channel allocating routines.
This commit message is also incorrect, but I amended it.
Besides, when I amend commit messages I make sure I really
understand what is going on so no big deal...
> Cc: Vinod Koul <vinod.koul@intel.com>
> Cc: Dan Williams <djbw@fb.com>
> Cc: Per Forlin <per.forlin@stericsson.com>
> Cc: Rabin Vincent <rabin@rab.in>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
I still need Vinod's ACK on this before I send it anywhere.
Patch applied!
Yours,
Linus Walleij
^ permalink raw reply
* Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
From: Linus Walleij @ 2013-05-15 16:33 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Felipe Balbi,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
David S. Miller, Herbert Xu, Vinod Koul, Arnd Bergmann,
Linus WALLEIJ, Srinidhi KASAGAR
In-Reply-To: <1368611522-9984-3-git-send-email-lee.jones@linaro.org>
On Wed, May 15, 2013 at 11:51 AM, Lee Jones <lee.jones@linaro.org> wrote:
> All configuration left in d40_phy_cfg() is runtime configurable and
> there is already a call into it from d40_runtime_config(), so let's
> rely on that.
>
> Acked-by: Vinod Koul <vnod.koul@intel.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
You forgot to update the commit message, but I saw that you
fixed what I asked for so I just went in and edited the commit message
and applied it.
Yours,
Linus Walleij
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox