Linux CXL
 help / color / mirror / Atom feed
From: Ben Widawsky <ben.widawsky@intel.com>
To: linux-cxl@vger.kernel.org
Cc: Ben Widawsky <ben.widawsky@intel.com>,
	Alison Schofield <alison.schofield@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Ira Weiny <ira.weiny@intel.com>,
	Jonathan Cameron <Jonathan.Cameron@Huawei.com>,
	Vishal Verma <vishal.l.verma@intel.com>
Subject: [PATCH 3/6] cxl/region: Introduce concept of region configuration
Date: Thu, 17 Jun 2021 10:36:52 -0700	[thread overview]
Message-ID: <20210617173655.430424-4-ben.widawsky@intel.com> (raw)
In-Reply-To: <20210617173655.430424-1-ben.widawsky@intel.com>

The region creation APIs leave a region unconfigured. Configuring the
region will work in the same way as similar subsystems such as devdax.
Sysfs attrs will be provided to allow userspace to configure the region.
Finally once all configuration is complete, userspace may "commit" the
config. What the kernel decides to do after a config is committed is out
of scope at this point.

Introduced here are the most basic attributes needed to configure a
region.

A x1 interleave example is provided below:

decoder1.0
├── create_region
├── delete_region
├── devtype
├── locked
├── region1.0:0
│   ├── offset
│   ├── size
│   ├── subsystem -> ../../../../../../../bus/cxl
│   ├── target0
│   ├── uevent
│   ├── uuid
│   └── verify
├── size
├── start
├── subsystem -> ../../../../../../bus/cxl
├── target_list
├── target_type
└── uevent

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
 Documentation/ABI/testing/sysfs-bus-cxl |  32 ++++
 drivers/cxl/region.c                    | 223 ++++++++++++++++++++++++
 2 files changed, 255 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index 115a25d2899d..70f9d09385a4 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -148,3 +148,35 @@ Description:
 		Deletes the named region. A region must be unbound from the
 		region driver before being deleted. The attributes expects a
 		region in the form "regionX.Y:Z".
+
+What:		/sys/bus/cxl/devices/decoderX.Y/regionX.Y:Z/offset
+Date:		June, 2021
+KernelVersion:	v5.14
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) A region resides within an address space that is claimed by
+		a decoder. Region space allocation is handled by the driver, but
+		the offset may be read by userspace tooling in order to
+		determine fragmentation, and available size for new regions.
+
+What:
+/sys/bus/cxl/devices/decoderX.Y/regionX.Y:Z/{size,uuid,target[0-15]}
+Date:		June, 2021
+KernelVersion:	v5.14
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Configuring regions requires a minimal set of parameters in
+		order for the subsequent bind operation to succeed. The
+		following parameters are defined:
+
+		==	========================================================
+		size	Manadatory. Phsyical address space the region will
+			consume.
+		uuid	Optional. A unique identifier for the region. If none is
+			selected, the kernel will create one.
+		target  Mandatory. Memory devices are the backing storage for a
+			region. There will be N targets based on the number of
+			interleave ways that the top level decoder is configured
+			for. Each target must be set with a memdev device ie.
+			'mem1'.
+		==	========================================================
diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c
index 391467e864a2..cf7fd3027419 100644
--- a/drivers/cxl/region.c
+++ b/drivers/cxl/region.c
@@ -3,7 +3,9 @@
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/device.h>
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/slab.h>
+#include <linux/uuid.h>
 #include <linux/idr.h>
 #include "region.h"
 #include "cxl.h"
@@ -21,16 +23,237 @@
  * relationship between decoder and region when the region is interleaved.
  */
 
+static struct cxl_region *to_cxl_region(struct device *dev);
+
+static bool is_region_active(struct cxl_region *region)
+{
+	/* TODO: Regions can't be activated yet. */
+	return false;
+}
+
+static ssize_t offset_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct cxl_region *region = to_cxl_region(dev);
+	struct cxl_decoder *cxld = to_cxl_decoder(dev->parent);
+
+	if (!region->res)
+		return sysfs_emit(buf, "\n");
+
+	return sysfs_emit(buf, "%#llx\n", cxld->range.start - region->res->start);
+}
+static DEVICE_ATTR_RO(offset);
+
+static ssize_t size_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct cxl_region *region = to_cxl_region(dev);
+
+	if (!region->res)
+		return sysfs_emit(buf, "*%llu\n", region->requested_size);
+
+	return sysfs_emit(buf, "%llu\n", resource_size(region->res));
+}
+
+static ssize_t size_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t len)
+{
+	struct cxl_region *region = to_cxl_region(dev);
+	unsigned long long val;
+	ssize_t rc;
+
+	rc = kstrtoull(buf, 0, &val);
+	if (rc)
+		return rc;
+
+	device_lock(&region->dev);
+	if (is_region_active(region)) {
+		rc = -EBUSY;
+	} else {
+		region->requested_size = val;
+	}
+	device_unlock(&region->dev);
+
+	return len;
+}
+static DEVICE_ATTR_RW(size);
+
+static ssize_t uuid_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct cxl_region *region = to_cxl_region(dev);
+
+	return sysfs_emit(buf, "%pUb\n", &region->uuid);
+}
+static ssize_t uuid_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t len)
+{
+	struct cxl_region *region = to_cxl_region(dev);
+	ssize_t rc;
+
+	if (len != UUID_STRING_LEN + 1)
+		return -EINVAL;
+
+	device_lock(&region->dev);
+	if (is_region_active(region)) {
+		rc = -EBUSY;
+	} else {
+		rc = uuid_parse(buf, &region->uuid);
+	}
+	device_unlock(&region->dev);
+
+	return rc ? rc : len;
+}
+static DEVICE_ATTR_RW(uuid);
+
+static struct attribute *region_attrs[] = {
+	&dev_attr_offset.attr,
+	&dev_attr_size.attr,
+	&dev_attr_uuid.attr,
+	NULL,
+};
+
+static const struct attribute_group region_group = {
+	.attrs = region_attrs,
+};
+
+static size_t show_targetN(struct cxl_region *region, char *buf, int n)
+{
+	int ret;
+
+	device_lock(&region->dev);
+	if (!region->targets[n])
+		ret = sysfs_emit(buf, "%s\n", dev_name(&region->targets[n]->dev));
+	else
+		ret = sysfs_emit(buf, "nil\n");
+	device_unlock(&region->dev);
+
+	return ret;
+}
+
+static size_t set_targetN(struct cxl_region *region, const char *buf, int n, size_t len)
+{
+	struct device *memdev_dev;
+	struct cxl_memdev *cxlmd;
+	ssize_t rc;
+	int val;
+
+	device_lock(&region->dev);
+
+	rc = kstrtoint(buf, 0, &val);
+	/* Special 'remote' target operation */
+	if (!rc && val == 0) {
+		cxlmd = region->targets[n];
+		if (cxlmd)
+			put_device(&cxlmd->dev);
+		region->targets[n] = NULL;
+		device_unlock(&region->dev);
+		return len;
+	}
+
+	memdev_dev = bus_find_device_by_name(&cxl_bus_type, NULL, buf);
+	if (!memdev_dev)
+		return -ENOENT;
+
+	cxlmd = to_cxl_memdev(memdev_dev);
+	get_device(&cxlmd->dev);
+	region->targets[n] = cxlmd;
+
+	device_unlock(&region->dev);
+
+	return len;
+}
+
+#define TARGET_ATTR_RW(n)                                                      \
+	static ssize_t target##n##_show(                                       \
+		struct device *dev, struct device_attribute *attr, char *buf)  \
+	{                                                                      \
+		return show_targetN(to_cxl_region(dev), buf, n);               \
+	}                                                                      \
+	static ssize_t target##n##_store(struct device *dev,                   \
+					 struct device_attribute *attr,        \
+					 const char *buf, size_t len)          \
+	{                                                                      \
+		return set_targetN(to_cxl_region(dev), buf, n, len);           \
+	}                                                                      \
+	static DEVICE_ATTR_RW(target##n)
+
+TARGET_ATTR_RW(0);
+TARGET_ATTR_RW(1);
+TARGET_ATTR_RW(2);
+TARGET_ATTR_RW(3);
+TARGET_ATTR_RW(4);
+TARGET_ATTR_RW(5);
+TARGET_ATTR_RW(6);
+TARGET_ATTR_RW(7);
+TARGET_ATTR_RW(8);
+TARGET_ATTR_RW(9);
+TARGET_ATTR_RW(10);
+TARGET_ATTR_RW(11);
+TARGET_ATTR_RW(12);
+TARGET_ATTR_RW(13);
+TARGET_ATTR_RW(14);
+TARGET_ATTR_RW(15);
+
+static struct attribute *interleave_attrs[] = {
+	&dev_attr_target0.attr,
+	&dev_attr_target1.attr,
+	&dev_attr_target2.attr,
+	&dev_attr_target3.attr,
+	&dev_attr_target4.attr,
+	&dev_attr_target5.attr,
+	&dev_attr_target6.attr,
+	&dev_attr_target7.attr,
+	&dev_attr_target8.attr,
+	&dev_attr_target9.attr,
+	&dev_attr_target10.attr,
+	&dev_attr_target11.attr,
+	&dev_attr_target12.attr,
+	&dev_attr_target13.attr,
+	&dev_attr_target14.attr,
+	&dev_attr_target15.attr,
+	NULL,
+};
+
+static umode_t visible_targets(struct kobject *kobj, struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct cxl_region *region = to_cxl_region(dev);
+
+	if (n < region->eniw)
+		return a->mode;
+	return 0;
+}
+
+static const struct attribute_group region_interleave_group = {
+	.attrs = interleave_attrs,
+	.is_visible = visible_targets,
+};
+
+static const struct attribute_group *region_groups[] = {
+	&region_group,
+	&region_interleave_group,
+	NULL,
+};
+
 static void cxl_region_release(struct device *dev);
 
 const struct device_type cxl_region_type = {
 	.name = "cxl_region",
 	.release = cxl_region_release,
+	.groups = region_groups
 };
 
 void cxl_free_region(struct cxl_decoder *cxld, struct cxl_region *region)
 {
+	int i;
+
 	ida_free(&cxld->region_ida, region->id);
+	for (i = 0; i < region->eniw; i++) {
+		if (region->targets[i])
+			put_device(&region->targets[i]->dev);
+	}
+
 	kfree(region);
 }
 
-- 
2.32.0


  parent reply	other threads:[~2021-06-17 17:37 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17 17:36 [PATCH 0/6] Region creation Ben Widawsky
2021-06-17 17:36 ` [PATCH 1/6] cxl/region: Add region creation ABI Ben Widawsky
2021-06-17 21:11   ` [PATCH v2 " Ben Widawsky
2021-06-18  9:13   ` [PATCH " Jonathan Cameron
2021-06-18 15:07     ` Ben Widawsky
2021-06-18 16:39       ` Dan Williams
2021-06-17 17:36 ` [PATCH 2/6] cxl: Move cxl_memdev conversion helper to mem.h Ben Widawsky
2021-06-18  9:13   ` Jonathan Cameron
2021-06-18 15:00   ` Dan Williams
2021-06-17 17:36 ` Ben Widawsky [this message]
2021-06-18 11:22   ` [PATCH 3/6] cxl/region: Introduce concept of region configuration Jonathan Cameron
2021-06-18 15:25     ` Ben Widawsky
2021-06-18 15:44       ` Jonathan Cameron
2021-06-17 17:36 ` [PATCH 4/6] cxl/region: Introduce a cxl_region driver Ben Widawsky
2021-06-17 21:13   ` [PATCH v2 " Ben Widawsky
2021-06-18 11:49     ` Jonathan Cameron
2021-06-17 17:36 ` [PATCH 5/6] cxl/core: Convert decoder range to resource Ben Widawsky
2021-06-18 11:52   ` Jonathan Cameron
2021-06-17 17:36 ` [PATCH 6/6] cxl/region: Handle region's address space allocation Ben Widawsky
2021-06-18 13:35   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210617173655.430424-4-ben.widawsky@intel.com \
    --to=ben.widawsky@intel.com \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox