From: Ben Widawsky <ben.widawsky@intel.com>
To: linux-cxl@vger.kernel.org, Chet Douglas <chet.r.douglas@intel.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Jonathan Cameron <Jonathan.Cameron@Huawei.com>,
Vishal Verma <vishal.l.verma@intel.com>
Subject: [RFC PATCH v2 06/28] cxl: Introduce endpoint decoders
Date: Fri, 22 Oct 2021 11:36:47 -0700 [thread overview]
Message-ID: <20211022183709.1199701-7-ben.widawsky@intel.com> (raw)
In-Reply-To: <20211022183709.1199701-1-ben.widawsky@intel.com>
Endpoints have decoders too. It is useful to share the same
infrastructure from cxl_core. Endpoints do not have dports (downstream
targets), only the underlying physical medium. As a result, some special
casing is needed.
There is no functional change introduced yet as endpoints don't actually
enumerate decoders yet.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
drivers/cxl/core/bus.c | 40 ++++++++++++++++++++++++++++++++--------
drivers/cxl/cxl.h | 3 ++-
2 files changed, 34 insertions(+), 9 deletions(-)
diff --git a/drivers/cxl/core/bus.c b/drivers/cxl/core/bus.c
index 454d4d846eb2..5564a71773e2 100644
--- a/drivers/cxl/core/bus.c
+++ b/drivers/cxl/core/bus.c
@@ -175,6 +175,12 @@ static const struct attribute_group *cxl_decoder_switch_attribute_groups[] = {
NULL,
};
+static const struct attribute_group *cxl_decoder_endpoint_attribute_groups[] = {
+ &cxl_decoder_base_attribute_group,
+ &cxl_base_attribute_group,
+ NULL,
+};
+
static void cxl_decoder_release(struct device *dev)
{
struct cxl_decoder *cxld = to_cxl_decoder(dev);
@@ -184,6 +190,12 @@ static void cxl_decoder_release(struct device *dev)
kfree(cxld);
}
+static const struct device_type cxl_decoder_endpoint_type = {
+ .name = "cxl_decoder_endpoint",
+ .release = cxl_decoder_release,
+ .groups = cxl_decoder_endpoint_attribute_groups,
+};
+
static const struct device_type cxl_decoder_switch_type = {
.name = "cxl_decoder_switch",
.release = cxl_decoder_release,
@@ -196,6 +208,11 @@ static const struct device_type cxl_decoder_root_type = {
.groups = cxl_decoder_root_attribute_groups,
};
+static bool is_endpoint_decoder(struct device *dev)
+{
+ return dev->type == &cxl_decoder_endpoint_type;
+}
+
bool is_root_decoder(struct device *dev)
{
return dev->type == &cxl_decoder_root_type;
@@ -483,7 +500,8 @@ static int decoder_populate_targets(struct cxl_decoder *cxld,
return rc;
}
-struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port, int nr_targets)
+struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port,
+ unsigned int nr_targets)
{
struct cxl_decoder *cxld, cxld_const_init = {
.nr_targets = nr_targets,
@@ -491,7 +509,7 @@ struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port, int nr_targets)
struct device *dev;
int rc = 0;
- if (nr_targets > CXL_DECODER_MAX_INTERLEAVE || nr_targets < 1)
+ if (nr_targets > CXL_DECODER_MAX_INTERLEAVE)
return ERR_PTR(-EINVAL);
cxld = kzalloc(struct_size(cxld, target, nr_targets), GFP_KERNEL);
@@ -510,8 +528,11 @@ struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port, int nr_targets)
dev->parent = &port->dev;
dev->bus = &cxl_bus_type;
+ /* Endpoints don't have a target list */
+ if (nr_targets == 0)
+ dev->type = &cxl_decoder_endpoint_type;
/* root ports do not have a cxl_port_type parent */
- if (port->dev.parent->type == &cxl_port_type)
+ else if (port->dev.parent->type == &cxl_port_type)
dev->type = &cxl_decoder_switch_type;
else
dev->type = &cxl_decoder_root_type;
@@ -538,12 +559,15 @@ int cxl_decoder_add(struct cxl_decoder *cxld, int *target_map)
if (cxld->interleave_ways < 1)
return -EINVAL;
- port = to_cxl_port(cxld->dev.parent);
- rc = decoder_populate_targets(cxld, port, target_map);
- if (rc)
- return rc;
-
dev = &cxld->dev;
+
+ port = to_cxl_port(cxld->dev.parent);
+ if (!is_endpoint_decoder(dev)) {
+ rc = decoder_populate_targets(cxld, port, target_map);
+ if (rc)
+ return rc;
+ }
+
rc = dev_set_name(dev, "decoder%d.%d", port->id, cxld->id);
if (rc)
return rc;
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 7f2e2bdc7883..91b8fd54bc93 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -293,7 +293,8 @@ int cxl_add_dport(struct cxl_port *port, struct device *dport, int port_id,
struct cxl_decoder *to_cxl_decoder(struct device *dev);
bool is_root_decoder(struct device *dev);
-struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port, int nr_targets);
+struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port,
+ unsigned int nr_targets);
int cxl_decoder_add(struct cxl_decoder *cxld, int *target_map);
int cxl_decoder_autoremove(struct device *host, struct cxl_decoder *cxld);
--
2.33.1
next prev parent reply other threads:[~2021-10-22 18:37 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-22 18:36 [RFC PATCH v2 00/28] CXL Region Creation / HDM decoder programming Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 01/28] cxl: Rename CXL_MEM to CXL_PCI Ben Widawsky
2021-10-29 20:15 ` Dan Williams
2021-10-29 21:20 ` Ben Widawsky
2021-10-29 21:39 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 02/28] cxl: Move register block enumeration to core Ben Widawsky
2021-10-29 20:23 ` Dan Williams
2021-10-29 21:23 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 03/28] cxl/acpi: Map component registers for Root Ports Ben Widawsky
2021-10-29 20:28 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 04/28] cxl: Add helper for new drivers Ben Widawsky
2021-10-29 20:30 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 05/28] cxl/core: Convert decoder range to resource Ben Widawsky
2021-10-29 20:50 ` Dan Williams
2021-10-29 21:26 ` Ben Widawsky
2021-10-29 22:22 ` Dan Williams
2021-10-29 22:37 ` Ben Widawsky
2021-11-01 14:33 ` Ben Widawsky
2021-10-22 18:36 ` Ben Widawsky [this message]
2021-10-29 21:00 ` [RFC PATCH v2 06/28] cxl: Introduce endpoint decoders Dan Williams
2021-10-29 22:02 ` Ben Widawsky
2021-10-29 22:25 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 07/28] cxl/core: Move target population locking to caller Ben Widawsky
2021-10-29 23:03 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 08/28] cxl/port: Introduce a port driver Ben Widawsky
2021-10-30 1:37 ` Dan Williams
2021-10-31 17:53 ` Dan Williams
2021-10-31 18:10 ` Dan Williams
2021-11-01 17:36 ` Ben Widawsky
2021-11-01 17:53 ` Ben Widawsky
2021-11-01 17:54 ` Ben Widawsky
2021-11-02 3:31 ` Dan Williams
2021-11-02 16:27 ` Ben Widawsky
2021-11-02 17:21 ` Dan Williams
2021-11-02 16:58 ` Ben Widawsky
2021-11-04 19:10 ` Dan Williams
2021-11-04 19:49 ` Ben Widawsky
2021-11-04 20:04 ` Dan Williams
2021-11-04 21:25 ` Ben Widawsky
2021-11-04 16:37 ` Ben Widawsky
2021-11-04 19:17 ` Dan Williams
2021-11-04 19:46 ` Ben Widawsky
2021-11-04 20:00 ` Dan Williams
2021-11-04 21:26 ` Ben Widawsky
2021-11-03 15:18 ` Jonathan Cameron
2021-10-22 18:36 ` [RFC PATCH v2 09/28] cxl/acpi: Map single port host bridge component registers Ben Widawsky
2021-10-31 18:03 ` Dan Williams
2021-11-01 17:07 ` Ben Widawsky
2021-11-02 2:15 ` Dan Williams
2021-11-02 16:31 ` Ben Widawsky
2021-11-02 17:46 ` Dan Williams
2021-11-02 17:57 ` Ben Widawsky
2021-11-02 18:10 ` Dan Williams
2021-11-02 18:27 ` Ben Widawsky
2021-11-02 18:49 ` Dan Williams
2021-11-02 21:15 ` Ben Widawsky
2021-11-02 21:34 ` Dan Williams
2021-11-02 21:47 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 10/28] cxl/core: Store global list of root ports Ben Widawsky
2021-10-31 18:32 ` Dan Williams
2021-11-01 18:43 ` Ben Widawsky
2021-11-02 2:04 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 11/28] cxl/acpi: Rescan bus at probe completion Ben Widawsky
2021-10-31 19:25 ` Dan Williams
2021-11-01 18:56 ` Ben Widawsky
2021-11-01 21:45 ` Ben Widawsky
2021-11-02 1:56 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 12/28] cxl/core: Store component register base for memdevs Ben Widawsky
2021-10-31 20:13 ` Dan Williams
2021-11-01 21:50 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 13/28] cxl: Flesh out register names Ben Widawsky
2021-10-31 20:18 ` Dan Williams
2021-11-01 22:00 ` Ben Widawsky
2021-11-02 1:53 ` Dan Williams
2021-11-03 15:53 ` Jonathan Cameron
2021-11-03 16:03 ` Ben Widawsky
2021-11-03 16:42 ` Jonathan Cameron
2021-11-03 17:05 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 14/28] cxl: Hide devm host for ports Ben Widawsky
2021-10-31 21:14 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 15/28] cxl/core: Introduce API to scan switch ports Ben Widawsky
2021-11-01 5:39 ` Dan Williams
2021-11-01 22:56 ` Ben Widawsky
2021-11-02 1:45 ` Dan Williams
2021-11-02 16:39 ` Ben Widawsky
2021-11-02 20:00 ` Dan Williams
2021-11-16 16:50 ` Ben Widawsky
2021-11-16 17:51 ` Dan Williams
2021-11-16 18:02 ` Ben Widawsky
2021-11-03 16:08 ` Jonathan Cameron
2021-11-10 17:49 ` Ben Widawsky
2021-11-10 18:10 ` Jonathan Cameron
2021-11-10 21:03 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 16/28] cxl: Introduce cxl_mem driver Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 17/28] cxl: Disable switch hierarchies for now Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 18/28] cxl/region: Add region creation ABI Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 19/28] cxl/region: Introduce concept of region configuration Ben Widawsky
2021-12-15 17:47 ` Jonathan Cameron
2021-10-22 18:37 ` [RFC PATCH v2 20/28] cxl/region: Introduce a cxl_region driver Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 21/28] cxl/acpi: Handle address space allocation Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 22/28] cxl/region: Address " Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 23/28] cxl/region: Implement XHB verification Ben Widawsky
2022-01-06 16:55 ` Jonathan Cameron
2022-01-06 16:58 ` Ben Widawsky
2022-01-06 17:33 ` Jonathan Cameron
2022-01-06 18:10 ` Jonathan Cameron
2022-01-06 18:34 ` Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 24/28] cxl/region: HB port config verification Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 25/28] cxl/region: Record host bridge target list Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 26/28] cxl/mem: Store the endpoint's uport Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 27/28] cxl/region: Gather HDM decoder resources Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 28/28] cxl: Program decoders for regions Ben Widawsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211022183709.1199701-7-ben.widawsky@intel.com \
--to=ben.widawsky@intel.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=alison.schofield@intel.com \
--cc=chet.r.douglas@intel.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox