Linux CXL
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: qemu-devel@nongnu.org, "Alex Bennée" <alex.bennee@linaro.org>,
	"Marcel Apfelbaum" <marcel@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	"Igor Mammedov" <imammedo@redhat.com>
Cc: linux-cxl@vger.kernel.org,
	"Ben Widawsky" <ben.widawsky@intel.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	linuxarm@huawei.com,
	"Shameerali Kolothum Thodi"
	<shameerali.kolothum.thodi@huawei.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Saransh Gupta1" <saransh@ibm.com>,
	"Shreyas Shah" <shreyas.shah@elastics.cloud>,
	"Chris Browy" <cbrowy@avery-design.com>,
	"Samarth Saxena" <samarths@cadence.com>,
	"Dan Williams" <dan.j.williams@intel.com>
Subject: [PATCH v6 06/43] hw/cxl/device: Implement basic mailbox (8.2.8.4)
Date: Fri, 11 Feb 2022 12:07:10 +0000	[thread overview]
Message-ID: <20220211120747.3074-7-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20220211120747.3074-1-Jonathan.Cameron@huawei.com>

From: Ben Widawsky <ben.widawsky@intel.com>

This is the beginning of implementing mailbox support for CXL 2.0
devices. The implementation recognizes when the doorbell is rung,
handles the command/payload, clears the doorbell while returning error
codes and data.

Generally the mailbox mechanism is designed to permit communication
between the host OS and the firmware running on the device. For our
purposes, we emulate both the firmware, implemented primarily in
cxl-mailbox-utils.c, and the hardware.

No commands are implemented yet.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 hw/cxl/cxl-device-utils.c   | 128 ++++++++++++++++++++++++++-
 hw/cxl/cxl-mailbox-utils.c  | 171 ++++++++++++++++++++++++++++++++++++
 hw/cxl/meson.build          |   1 +
 include/hw/cxl/cxl.h        |   3 +
 include/hw/cxl/cxl_device.h |  19 +++-
 5 files changed, 320 insertions(+), 2 deletions(-)

diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
index 0895b9d78b..39011468ef 100644
--- a/hw/cxl/cxl-device-utils.c
+++ b/hw/cxl/cxl-device-utils.c
@@ -44,6 +44,114 @@ static uint64_t dev_reg_read(void *opaque, hwaddr offset, unsigned size)
     return 0;
 }
 
+static uint64_t mailbox_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+    CXLDeviceState *cxl_dstate = opaque;
+
+    switch (size) {
+    case 1:
+        return cxl_dstate->mbox_reg_state[offset];
+    case 2:
+        return cxl_dstate->mbox_reg_state16[offset / 2];
+    case 4:
+        return cxl_dstate->mbox_reg_state32[offset / 4];
+    case 8:
+        return cxl_dstate->mbox_reg_state64[offset / 8];
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static void mailbox_mem_writel(uint32_t *reg_state, hwaddr offset,
+                               uint64_t value)
+{
+    switch (offset) {
+    case A_CXL_DEV_MAILBOX_CTRL:
+        /* fallthrough */
+    case A_CXL_DEV_MAILBOX_CAP:
+        /* RO register */
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP,
+                      "%s Unexpected 32-bit access to 0x%" PRIx64 " (WI)\n",
+                      __func__, offset);
+        return;
+    }
+
+    reg_state[offset / 4] = value;
+}
+
+static void mailbox_mem_writeq(uint64_t *reg_state, hwaddr offset,
+                               uint64_t value)
+{
+    switch (offset) {
+    case A_CXL_DEV_MAILBOX_CMD:
+        break;
+    case A_CXL_DEV_BG_CMD_STS:
+        /* BG not supported */
+        /* fallthrough */
+    case A_CXL_DEV_MAILBOX_STS:
+        /* Read only register, will get updated by the state machine */
+        return;
+    default:
+        qemu_log_mask(LOG_UNIMP,
+                      "%s Unexpected 64-bit access to 0x%" PRIx64 " (WI)\n",
+                      __func__, offset);
+        return;
+    }
+
+
+    reg_state[offset / 8] = value;
+}
+
+static void mailbox_reg_write(void *opaque, hwaddr offset, uint64_t value,
+                              unsigned size)
+{
+    CXLDeviceState *cxl_dstate = opaque;
+
+    if (offset >= A_CXL_DEV_CMD_PAYLOAD) {
+        memcpy(cxl_dstate->mbox_reg_state + offset, &value, size);
+        return;
+    }
+
+    /*
+     * Lock is needed to prevent concurrent writes as well as to
+     * prevent writes coming in while the firmware is processing.
+     * Until background commands or the second mailbox are implemented
+     * memory access is synchronized at a higher level (per memory region).
+     */
+
+    switch (size) {
+    case 4:
+        mailbox_mem_writel(cxl_dstate->mbox_reg_state32, offset, value);
+        break;
+    case 8:
+        mailbox_mem_writeq(cxl_dstate->mbox_reg_state64, offset, value);
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    if (ARRAY_FIELD_EX32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CTRL,
+                         DOORBELL))
+        cxl_process_mailbox(cxl_dstate);
+}
+
+static const MemoryRegionOps mailbox_ops = {
+    .read = mailbox_reg_read,
+    .write = mailbox_reg_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+        .unaligned = false,
+    },
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
+
 static const MemoryRegionOps dev_ops = {
     .read = dev_reg_read,
     .write = NULL, /* status register is read only */
@@ -84,20 +192,33 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
                           "cap-array", CXL_CAPS_SIZE);
     memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
                           "device-status", CXL_DEVICE_REGISTERS_LENGTH);
+    memory_region_init_io(&cxl_dstate->mailbox, obj, &mailbox_ops, cxl_dstate,
+                          "mailbox", CXL_MAILBOX_REGISTERS_LENGTH);
 
     memory_region_add_subregion(&cxl_dstate->device_registers, 0,
                                 &cxl_dstate->caps);
     memory_region_add_subregion(&cxl_dstate->device_registers,
                                 CXL_DEVICE_REGISTERS_OFFSET,
                                 &cxl_dstate->device);
+    memory_region_add_subregion(&cxl_dstate->device_registers,
+                                CXL_MAILBOX_REGISTERS_OFFSET,
+                                &cxl_dstate->mailbox);
 }
 
 static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
 
+static void mailbox_reg_init_common(CXLDeviceState *cxl_dstate)
+{
+    /* 2048 payload size, with no interrupt or background support */
+    ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CAP,
+                     PAYLOAD_SIZE, CXL_MAILBOX_PAYLOAD_SHIFT);
+    cxl_dstate->payload_size = CXL_MAILBOX_MAX_PAYLOAD_SIZE;
+}
+
 void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
 {
     uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
-    const int cap_count = 1;
+    const int cap_count = 2;
 
     /* CXL Device Capabilities Array Register */
     ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
@@ -106,4 +227,9 @@ void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
 
     cxl_device_cap_init(cxl_dstate, DEVICE, 1);
     device_reg_init_common(cxl_dstate);
+
+    cxl_device_cap_init(cxl_dstate, MAILBOX, 2);
+    mailbox_reg_init_common(cxl_dstate);
+
+    assert(cxl_initialize_mailbox(cxl_dstate) == 0);
 }
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
new file mode 100644
index 0000000000..d497ec50a6
--- /dev/null
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -0,0 +1,171 @@
+/*
+ * CXL Utility library for mailbox interface
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/cxl/cxl.h"
+#include "hw/pci/pci.h"
+#include "qemu/log.h"
+#include "qemu/uuid.h"
+
+/*
+ * How to add a new command, example. The command set FOO, with cmd BAR.
+ *  1. Add the command set and cmd to the enum.
+ *     FOO    = 0x7f,
+ *          #define BAR 0
+ *  2. Implement the handler
+ *    static ret_code cmd_foo_bar(struct cxl_cmd *cmd,
+ *                                  CXLDeviceState *cxl_dstate, uint16_t *len)
+ *  3. Add the command to the cxl_cmd_set[][]
+ *    [FOO][BAR] = { "FOO_BAR", cmd_foo_bar, x, y },
+ *  4. Implement your handler
+ *     define_mailbox_handler(FOO_BAR) { ... return CXL_MBOX_SUCCESS; }
+ *
+ *
+ *  Writing the handler:
+ *    The handler will provide the &struct cxl_cmd, the &CXLDeviceState, and the
+ *    in/out length of the payload. The handler is responsible for consuming the
+ *    payload from cmd->payload and operating upon it as necessary. It must then
+ *    fill the output data into cmd->payload (overwriting what was there),
+ *    setting the length, and returning a valid return code.
+ *
+ *  XXX: The handler need not worry about endianess. The payload is read out of
+ *  a register interface that already deals with it.
+ */
+
+/* 8.2.8.4.5.1 Command Return Codes */
+typedef enum {
+    CXL_MBOX_SUCCESS = 0x0,
+    CXL_MBOX_BG_STARTED = 0x1,
+    CXL_MBOX_INVALID_INPUT = 0x2,
+    CXL_MBOX_UNSUPPORTED = 0x3,
+    CXL_MBOX_INTERNAL_ERROR = 0x4,
+    CXL_MBOX_RETRY_REQUIRED = 0x5,
+    CXL_MBOX_BUSY = 0x6,
+    CXL_MBOX_MEDIA_DISABLED = 0x7,
+    CXL_MBOX_FW_XFER_IN_PROGRESS = 0x8,
+    CXL_MBOX_FW_XFER_OUT_OF_ORDER = 0x9,
+    CXL_MBOX_FW_AUTH_FAILED = 0xa,
+    CXL_MBOX_FW_INVALID_SLOT = 0xb,
+    CXL_MBOX_FW_ROLLEDBACK = 0xc,
+    CXL_MBOX_FW_REST_REQD = 0xd,
+    CXL_MBOX_INVALID_HANDLE = 0xe,
+    CXL_MBOX_INVALID_PA = 0xf,
+    CXL_MBOX_INJECT_POISON_LIMIT = 0x10,
+    CXL_MBOX_PERMANENT_MEDIA_FAILURE = 0x11,
+    CXL_MBOX_ABORTED = 0x12,
+    CXL_MBOX_INVALID_SECURITY_STATE = 0x13,
+    CXL_MBOX_INCORRECT_PASSPHRASE = 0x14,
+    CXL_MBOX_UNSUPPORTED_MAILBOX = 0x15,
+    CXL_MBOX_INVALID_PAYLOAD_LENGTH = 0x16,
+    CXL_MBOX_MAX = 0x17
+} ret_code;
+
+struct cxl_cmd;
+typedef ret_code (*opcode_handler)(struct cxl_cmd *cmd,
+                                   CXLDeviceState *cxl_dstate, uint16_t *len);
+struct cxl_cmd {
+    const char *name;
+    opcode_handler handler;
+    ssize_t in;
+    uint16_t effect; /* Reported in CEL */
+    uint8_t *payload;
+};
+
+#define DEFINE_MAILBOX_HANDLER_ZEROED(name, size)                         \
+    uint16_t __zero##name = size;                                         \
+    static ret_code cmd_##name(struct cxl_cmd *cmd,                       \
+                               CXLDeviceState *cxl_dstate, uint16_t *len) \
+    {                                                                     \
+        *len = __zero##name;                                              \
+        memset(cmd->payload, 0, *len);                                    \
+        return CXL_MBOX_SUCCESS;                                          \
+    }
+#define DEFINE_MAILBOX_HANDLER_NOP(name)                                  \
+    static ret_code cmd_##name(struct cxl_cmd *cmd,                       \
+                               CXLDeviceState *cxl_dstate, uint16_t *len) \
+    {                                                                     \
+        return CXL_MBOX_SUCCESS;                                          \
+    }
+
+static QemuUUID cel_uuid;
+
+static struct cxl_cmd cxl_cmd_set[256][256] = {};
+
+void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+{
+    uint16_t ret = CXL_MBOX_SUCCESS;
+    struct cxl_cmd *cxl_cmd;
+    uint64_t status_reg;
+    opcode_handler h;
+
+    /*
+     * current state of mailbox interface
+     *  mbox_cap_reg = cxl_dstate->reg_state32[R_CXL_DEV_MAILBOX_CAP];
+     *  mbox_ctrl_reg = cxl_dstate->reg_state32[R_CXL_DEV_MAILBOX_CTRL];
+     *  status_reg = *(uint64_t *)&cxl_dstate->reg_state[A_CXL_DEV_MAILBOX_STS];
+     */
+    uint64_t command_reg = cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_CMD];
+
+    uint8_t set = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND_SET);
+    uint8_t cmd = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND);
+    uint16_t len = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH);
+    cxl_cmd = &cxl_cmd_set[set][cmd];
+    h = cxl_cmd->handler;
+    if (!h) {
+        qemu_log_mask(LOG_UNIMP, "Command %04xh not implemented\n",
+                                 set << 8 | cmd);
+        goto handled;
+    }
+
+    if (len != cxl_cmd->in) {
+        ret = CXL_MBOX_INVALID_PAYLOAD_LENGTH;
+    }
+
+    cxl_cmd->payload = cxl_dstate->mbox_reg_state + A_CXL_DEV_CMD_PAYLOAD;
+    ret = (*h)(cxl_cmd, cxl_dstate, &len);
+    assert(len <= cxl_dstate->payload_size);
+
+handled:
+    /* Set the return code */
+    status_reg = FIELD_DP64(0, CXL_DEV_MAILBOX_STS, ERRNO, ret);
+
+    /* Set the return length */
+    command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND_SET, 0);
+    command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND, 0);
+    command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH, len);
+
+    cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_CMD] = command_reg;
+    cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_STS] = status_reg;
+
+    /* Tell the host we're done */
+    ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CTRL,
+                     DOORBELL, 0);
+}
+
+int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate)
+{
+    /* CXL 2.0: Table 169 Get Supported Logs Log Entry */
+    const char *cel_uuidstr = "0da9c0b5-bf41-4b78-8f79-96b1623b3f17";
+
+    for (int set = 0; set < 256; set++) {
+        for (int cmd = 0; cmd < 256; cmd++) {
+            if (cxl_cmd_set[set][cmd].handler) {
+                struct cxl_cmd *c = &cxl_cmd_set[set][cmd];
+                struct cel_log *log =
+                    &cxl_dstate->cel_log[cxl_dstate->cel_size];
+
+                log->opcode = (set << 8) | cmd;
+                log->effect = c->effect;
+                cxl_dstate->cel_size++;
+            }
+        }
+    }
+
+    return qemu_uuid_parse(cel_uuidstr, &cel_uuid);
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index dd7c6f8e5a..e68eea2358 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -2,4 +2,5 @@ softmmu_ss.add(when: 'CONFIG_CXL',
                if_true: files(
                    'cxl-component-utils.c',
                    'cxl-device-utils.c',
+                   'cxl-mailbox-utils.c',
                ))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index b9d1ac3fad..554ad93b6b 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -14,4 +14,7 @@
 #include "cxl_component.h"
 #include "cxl_device.h"
 
+#define CXL_COMPONENT_REG_BAR_IDX 0
+#define CXL_DEVICE_REG_BAR_IDX 2
+
 #endif
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 1ac0dcd97e..49dcca7e44 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -95,7 +95,21 @@ typedef struct cxl_device_state {
     };
 
     /* mmio for the mailbox registers 8.2.8.4 */
-    MemoryRegion mailbox;
+    struct {
+        MemoryRegion mailbox;
+        uint16_t payload_size;
+        union {
+            uint8_t mbox_reg_state[CXL_MAILBOX_REGISTERS_LENGTH];
+            uint16_t mbox_reg_state16[CXL_MAILBOX_REGISTERS_LENGTH / 2];
+            uint32_t mbox_reg_state32[CXL_MAILBOX_REGISTERS_LENGTH / 4];
+            uint64_t mbox_reg_state64[CXL_MAILBOX_REGISTERS_LENGTH / 8];
+        };
+        struct cel_log {
+            uint16_t opcode;
+            uint16_t effect;
+        } cel_log[1 << 16];
+        size_t cel_size;
+    };
 
     /* memory region for persistent memory, HDM */
     uint64_t pmem_size;
@@ -145,6 +159,9 @@ CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE, CXL_DEVICE_CAP_HDR1_OFFSET)
 CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
                                                CXL_DEVICE_CAP_REG_SIZE)
 
+int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate);
+void cxl_process_mailbox(CXLDeviceState *cxl_dstate);
+
 #define cxl_device_cap_init(dstate, reg, cap_id)                           \
     do {                                                                   \
         uint32_t *cap_hdrs = dstate->caps_reg_state32;                     \
-- 
2.32.0


  parent reply	other threads:[~2022-02-11 12:10 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-11 12:07 [PATCH v6 00/43] CXl 2.0 emulation Support Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 01/43] hw/pci/cxl: Add a CXL component type (interface) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 02/43] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 03/43] MAINTAINERS: Add entry for Compute Express Link Emulation Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 04/43] hw/cxl/device: Introduce a CXL device (8.2.8) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 05/43] hw/cxl/device: Implement the CAP array (8.2.8.1-2) Jonathan Cameron
2022-02-11 12:07 ` Jonathan Cameron [this message]
2022-03-01 15:32   ` [PATCH v6 06/43] hw/cxl/device: Implement basic mailbox (8.2.8.4) Alex Bennée
2022-03-03 16:31     ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 07/43] hw/cxl/device: Add memory device utilities Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 08/43] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 09/43] hw/cxl/device: Timestamp implementation (8.2.9.3) Jonathan Cameron
2022-03-01 15:54   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 10/43] hw/cxl/device: Add log commands (8.2.9.4) + CEL Jonathan Cameron
2022-03-01 17:45   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 11/43] hw/pxb: Use a type for realizing expanders Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 12/43] hw/pci/cxl: Create a CXL bus type Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 13/43] cxl: Machine level control on whether CXL support is enabled Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 14/43] hw/pxb: Allow creation of a CXL PXB (host bridge) Jonathan Cameron
2022-03-01 17:47   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 15/43] qtest/cxl: Introduce initial test for pxb-cxl only Jonathan Cameron
2022-03-01 18:00   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 16/43] hw/cxl/rp: Add a root port Jonathan Cameron
2022-03-01 18:08   ` Alex Bennée
2022-03-03 17:22     ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 17/43] hw/cxl/device: Add a memory device (8.2.8.5) Jonathan Cameron
2022-02-11 16:50   ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 18/43] qtests/cxl: Add initial root port and CXL type3 tests Jonathan Cameron
2022-03-01 18:11   ` Alex Bennée
2022-03-03 17:53     ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 19/43] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12) Jonathan Cameron
2022-03-01 18:17   ` Alex Bennée
2022-03-03 18:07     ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 20/43] hw/cxl/device: Add some trivial commands Jonathan Cameron
2022-03-01 18:46   ` Alex Bennée
2022-03-04 13:16     ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 21/43] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing Jonathan Cameron
2022-03-02 10:01   ` Alex Bennée
2022-03-04 13:30     ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 22/43] hw/cxl/device: Implement get/set Label Storage Area (LSA) Jonathan Cameron
2022-03-02 10:03   ` Alex Bennée
2022-03-04 14:16     ` Jonathan Cameron
2022-03-04 14:26       ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 23/43] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142) Jonathan Cameron
2022-03-02 10:20   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 24/43] acpi/cxl: Add _OSC implementation (9.14.2) Jonathan Cameron
2022-03-02 12:14   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 25/43] acpi/cxl: Create the CEDT (9.14.1) Jonathan Cameron
2022-03-02 12:16   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 26/43] hw/cxl/component: Add utils for interleave parameter encoding/decoding Jonathan Cameron
2022-03-02 12:17   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 27/43] hw/cxl/host: Add support for CXL Fixed Memory Windows Jonathan Cameron
2022-03-02  6:55   ` Markus Armbruster
2022-03-04 15:56     ` Jonathan Cameron
2022-03-04 17:13       ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 28/43] acpi/cxl: Introduce CFMWS structures in CEDT Jonathan Cameron
2022-03-02 12:18   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 29/43] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl Jonathan Cameron
2022-03-02 13:53   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 30/43] pci/pcie_port: Add pci_find_port_by_pn() Jonathan Cameron
2022-03-02 16:07   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 31/43] CXL/cxl_component: Add cxl_get_hb_cstate() Jonathan Cameron
2022-03-02 16:07   ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 32/43] mem/cxl_type3: Add read and write functions for associated hostmem Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 33/43] cxl/cxl-host: Add memops for CFMWS region Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 34/43] RFC: softmmu/memory: Add ops to memory_region_ram_init_from_file Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 35/43] hw/cxl/component Add a dumb HDM decoder handler Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 36/43] i386/pc: Enable CXL fixed memory windows Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 37/43] tests/acpi: q35: Allow addition of a CXL test Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 38/43] qtests/bios-tables-test: Add a test for CXL emulation Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 39/43] tests/acpi: Add tables " Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 40/43] qtest/cxl: Add more complex test cases with CFMWs Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 41/43] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 42/43] qtest/cxl: Add aarch64 virt test for CXL Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 43/43] docs/cxl: Add initial Compute eXpress Link (CXL) documentation Jonathan Cameron
2022-02-18 18:17 ` [PATCH v6 00/43] CXl 2.0 emulation Support Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220211120747.3074-7-Jonathan.Cameron@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=alex.bennee@linaro.org \
    --cc=ben.widawsky@intel.com \
    --cc=cbrowy@avery-design.com \
    --cc=dan.j.williams@intel.com \
    --cc=f4bug@amsat.org \
    --cc=imammedo@redhat.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=marcel@redhat.com \
    --cc=mst@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=samarths@cadence.com \
    --cc=saransh@ibm.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=shreyas.shah@elastics.cloud \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox