From: ira.weiny@intel.com
To: Dan Williams <dan.j.williams@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ira Weiny <ira.weiny@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Dave Jiang <dave.jiang@intel.com>,
Ben Widawsky <bwidawsk@kernel.org>,
linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: [PATCH V11 6/8] cxl/port: Introduce cxl_cdat_valid()
Date: Fri, 10 Jun 2022 13:22:57 -0700 [thread overview]
Message-ID: <20220610202259.3544623-7-ira.weiny@intel.com> (raw)
In-Reply-To: <20220610202259.3544623-1-ira.weiny@intel.com>
From: Ira Weiny <ira.weiny@intel.com>
The CDAT data is protected by a checksum and should be the proper
length.
Introduce cxl_cdat_valid() to validate the data. While at it check and
store the sequence number.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
---
Changes from V8
Move code to cxl/core/pci.c
Changes from V6
Change name to cxl_cdat_valid() as this validates all the CDAT
data not just the header
Add error and debug prints
Changes from V5
New patch, split out
Update cdat_hdr_valid()
Remove revision and cs field parsing
There is no point in these
Add seq check and debug print.
---
drivers/cxl/cdat.h | 2 ++
drivers/cxl/core/pci.c | 36 ++++++++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/cxl/cdat.h b/drivers/cxl/cdat.h
index c6a48ab326bf..39eb561081f2 100644
--- a/drivers/cxl/cdat.h
+++ b/drivers/cxl/cdat.h
@@ -91,10 +91,12 @@
*
* @table: cache of CDAT table
* @length: length of cached CDAT table
+ * @seq: Last read Sequence number of the CDAT table
*/
struct cxl_cdat {
void *table;
size_t length;
+ u32 seq;
};
#endif /* !__CXL_CDAT_H__ */
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 84dc82f7dff0..cb70287e2984 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -531,6 +531,40 @@ static int cxl_cdat_get_length(struct device *dev,
return rc;
}
+static bool cxl_cdat_valid(struct device *dev, struct cxl_cdat *cdat)
+{
+ u32 *table = cdat->table;
+ u8 *data8 = cdat->table;
+ u32 length, seq;
+ u8 check;
+ int i;
+
+ length = FIELD_GET(CDAT_HEADER_DW0_LENGTH, table[0]);
+ if ((length < CDAT_HEADER_LENGTH_BYTES) || (length > cdat->length)) {
+ dev_err(dev, "CDAT Invalid length %u (%zu-%zu)\n", length,
+ CDAT_HEADER_LENGTH_BYTES, cdat->length);
+ return false;
+ }
+
+ for (check = 0, i = 0; i < length; i++)
+ check += data8[i];
+
+ dev_dbg(dev, "CDAT length %u CS %u\n", length, check);
+ if (check != 0) {
+ dev_err(dev, "CDAT Invalid checksum %u\n", check);
+ return false;
+ }
+
+ seq = FIELD_GET(CDAT_HEADER_DW3_SEQUENCE, table[3]);
+ /* Store the sequence for now. */
+ if (cdat->seq != seq) {
+ dev_info(dev, "CDAT seq change %x -> %x\n", cdat->seq, seq);
+ cdat->seq = seq;
+ }
+
+ return true;
+}
+
static int cxl_cdat_read_table(struct device *dev,
struct pci_doe_mb *cdat_mb,
struct cxl_cdat *cdat)
@@ -578,6 +612,8 @@ static int cxl_cdat_read_table(struct device *dev,
} while (entry_handle != CXL_DOE_TABLE_ACCESS_LAST_ENTRY);
+ if (!rc && !cxl_cdat_valid(dev, cdat))
+ return -EIO;
return rc;
}
--
2.35.1
next prev parent reply other threads:[~2022-06-10 20:23 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-10 20:22 [PATCH V11 0/8] CXL: Read CDAT and DSMAS data ira.weiny
2022-06-10 20:22 ` [PATCH V11 1/8] PCI: Add vendor ID for the PCI SIG ira.weiny
2022-06-10 20:22 ` [PATCH V11 2/8] PCI: Replace magic constant for PCI Sig Vendor ID ira.weiny
2022-06-10 20:22 ` [PATCH V11 3/8] PCI: Create PCI library functions in support of DOE mailboxes ira.weiny
2022-06-14 3:53 ` Li, Ming
2022-06-15 4:18 ` Ira Weiny
2022-06-17 22:40 ` Bjorn Helgaas
2022-06-18 16:39 ` Bjorn Helgaas
2022-06-22 16:46 ` Ira Weiny
2022-06-20 9:24 ` Jonathan Cameron
2022-06-22 23:06 ` Ira Weiny
2022-06-22 16:38 ` Ira Weiny
2022-06-17 22:56 ` Dan Williams
2022-06-20 10:23 ` Jonathan Cameron
2022-06-22 22:57 ` Ira Weiny
2022-06-23 18:03 ` Dan Williams
2022-06-22 22:37 ` Ira Weiny
2022-06-22 22:45 ` Ira Weiny
2022-06-22 22:57 ` Dan Williams
2022-06-23 0:25 ` Ira Weiny
2022-06-23 10:24 ` Jonathan Cameron
2022-06-23 18:14 ` Dan Williams
2022-06-23 18:07 ` Dan Williams
2022-06-10 20:22 ` [PATCH V11 4/8] cxl/pci: Create PCI DOE mailbox's for memory devices ira.weiny
2022-06-17 20:40 ` [PATCH v11 " Davidlohr Bueso
2022-06-17 20:51 ` Davidlohr Bueso
2022-06-21 18:24 ` Ira Weiny
2022-06-17 23:44 ` [PATCH V11 " Dan Williams
2022-06-21 18:29 ` Ira Weiny
2022-06-22 23:18 ` Ira Weiny
2022-06-21 20:37 ` Bjorn Helgaas
2022-06-10 20:22 ` [PATCH V11 5/8] cxl/port: Read CDAT table ira.weiny
2022-06-18 0:43 ` Dan Williams
2022-06-21 19:10 ` Dan Williams
2022-06-21 19:34 ` Lukas Wunner
2022-06-21 19:41 ` Dan Williams
2022-06-21 20:38 ` Ira Weiny
2022-06-21 21:14 ` Ira Weiny
2022-06-21 21:48 ` Dan Williams
2022-06-28 3:24 ` Ira Weiny
2022-06-10 20:22 ` ira.weiny [this message]
2022-06-10 20:22 ` [PATCH V11 7/8] cxl/port: Retry reading CDAT on failure ira.weiny
2022-06-28 3:32 ` Alison Schofield
2022-06-10 20:22 ` [PATCH V11 8/8] cxl/port: Parse out DSMAS data from CDAT table ira.weiny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220610202259.3544623-7-ira.weiny@intel.com \
--to=ira.weiny@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox