From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <alison.schofield@intel.com>,
<vishal.l.verma@intel.com>, <bwidawsk@kernel.org>,
<dan.j.williams@intel.com>, <shiju.jose@huawei.com>,
<rrichter@amd.com>
Subject: Re: [PATCH RFC v2 5/9] cxl/port: Limit the port driver to just the HDM Decoder Capability
Date: Thu, 20 Oct 2022 17:54:09 +0100 [thread overview]
Message-ID: <20221020175409.0000370f@huawei.com> (raw)
In-Reply-To: <166336988294.3803215.7334374806071251168.stgit@djiang5-desk3.ch.intel.com>
On Fri, 16 Sep 2022 16:11:22 -0700
Dave Jiang <dave.jiang@intel.com> wrote:
> From: Dan Williams <dan.j.williams@intel.com>
>
> Update the port driver to use cxl_map_component_registers() so that the
> component register block can be shared between the cxl_pci driver and
> the cxl_port driver. I.e. stop the port driver from reserving the entire
> component register block for itself via request_region() when it only
> needs the HDM Decoder Capability subset.
>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Makes sense
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> drivers/cxl/core/hdm.c | 32 ++++++++++++++++++--------------
> 1 file changed, 18 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index d1d2caea5c62..061551148cfe 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -82,18 +82,22 @@ static void parse_hdm_decoder_caps(struct cxl_hdm *cxlhdm)
> cxlhdm->interleave_mask |= GENMASK(14, 12);
> }
>
> -static void __iomem *map_hdm_decoder_regs(struct cxl_port *port,
> - void __iomem *crb)
> +static int map_hdm_decoder_regs(struct cxl_port *port, void __iomem *crb,
> + struct cxl_component_regs *regs)
> {
> - struct cxl_component_reg_map map;
> + struct cxl_register_map map = {
> + .resource = port->component_reg_phys,
> + .base = crb,
> + .max_size = CXL_COMPONENT_REG_BLOCK_SIZE,
> + };
>
> - cxl_probe_component_regs(&port->dev, crb, &map);
> - if (!map.hdm_decoder.valid) {
> + cxl_probe_component_regs(&port->dev, crb, &map.component_map);
> + if (!map.component_map.hdm_decoder.valid) {
> dev_err(&port->dev, "HDM decoder registers invalid\n");
> - return IOMEM_ERR_PTR(-ENXIO);
> + return -ENXIO;
> }
>
> - return crb + map.hdm_decoder.offset;
> + return cxl_map_component_regs(&port->dev, regs, &map);
> }
>
> /**
> @@ -103,25 +107,25 @@ static void __iomem *map_hdm_decoder_regs(struct cxl_port *port,
> struct cxl_hdm *devm_cxl_setup_hdm(struct cxl_port *port)
> {
> struct device *dev = &port->dev;
> - void __iomem *crb, *hdm;
> struct cxl_hdm *cxlhdm;
> + void __iomem *crb;
> + int rc;
>
> cxlhdm = devm_kzalloc(dev, sizeof(*cxlhdm), GFP_KERNEL);
> if (!cxlhdm)
> return ERR_PTR(-ENOMEM);
>
> cxlhdm->port = port;
> - crb = devm_cxl_iomap_block(dev, port->component_reg_phys,
> - CXL_COMPONENT_REG_BLOCK_SIZE);
> + crb = ioremap(port->component_reg_phys, CXL_COMPONENT_REG_BLOCK_SIZE);
> if (!crb) {
> dev_err(dev, "No component registers mapped\n");
> return ERR_PTR(-ENXIO);
> }
>
> - hdm = map_hdm_decoder_regs(port, crb);
> - if (IS_ERR(hdm))
> - return ERR_CAST(hdm);
> - cxlhdm->regs.hdm_decoder = hdm;
> + rc = map_hdm_decoder_regs(port, crb, &cxlhdm->regs);
> + iounmap(crb);
> + if (rc)
> + return ERR_PTR(rc);
>
> parse_hdm_decoder_caps(cxlhdm);
> if (cxlhdm->decoder_count == 0) {
>
>
next prev parent reply other threads:[~2022-10-20 16:54 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-16 23:10 [PATCH RFC v2 0/9] cxl/pci: Add fundamental error handling Dave Jiang
2022-09-16 23:11 ` [PATCH RFC v2 1/9] cxl/pci: Cleanup repeated code in cxl_probe_regs() helpers Dave Jiang
2022-09-16 23:11 ` [PATCH RFC v2 2/9] cxl/pci: Cleanup cxl_map_device_regs() Dave Jiang
2022-09-16 23:11 ` [PATCH RFC v2 3/9] cxl/pci: Kill cxl_map_regs() Dave Jiang
2022-10-18 13:43 ` Jonathan Cameron
2022-09-16 23:11 ` [PATCH RFC v2 4/9] cxl/core/regs: Make cxl_map_{component, device}_regs() device generic Dave Jiang
2022-09-16 23:11 ` [PATCH RFC v2 5/9] cxl/port: Limit the port driver to just the HDM Decoder Capability Dave Jiang
2022-10-20 16:54 ` Jonathan Cameron [this message]
2022-09-16 23:11 ` [PATCH RFC v2 6/9] cxl/pci: Prepare for mapping RAS Capability Structure Dave Jiang
2022-09-16 23:11 ` [PATCH RFC v2 7/9] cxl/pci: Find and map the " Dave Jiang
2022-09-16 23:11 ` [PATCH RFC v2 8/9] cxl/pci: add tracepoint events for CXL RAS Dave Jiang
2022-10-20 17:02 ` Jonathan Cameron
2022-10-20 17:07 ` Dave Jiang
2022-10-20 17:52 ` Steven Rostedt
2022-09-16 23:11 ` [PATCH RFC v2 9/9] cxl/pci: Add (hopeful) error handling support Dave Jiang
2022-10-20 13:45 ` Jonathan Cameron
2022-10-20 14:50 ` Dave Jiang
2022-10-20 14:03 ` Jonathan Cameron
2022-10-20 14:57 ` Dave Jiang
2022-10-20 15:52 ` Jonathan Cameron
2022-10-20 16:06 ` Dave Jiang
2022-10-20 16:11 ` Jonathan Cameron
2022-10-11 14:17 ` [PATCH RFC v2 0/9] cxl/pci: Add fundamental error handling Jonathan Cameron
2022-10-11 15:18 ` Dave Jiang
2022-10-11 17:19 ` Jonathan Cameron
2022-10-19 17:30 ` Jonathan Cameron
2022-10-19 17:38 ` Dave Jiang
2022-10-24 16:01 ` Jonathan Cameron
2022-10-25 15:22 ` Dave Jiang
2022-11-03 12:58 ` Jonathan Cameron
2022-11-03 13:27 ` Jonathan Cameron
2022-11-16 23:20 ` Dave Jiang
2022-11-17 13:50 ` Jonathan Cameron
2022-11-18 17:15 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221020175409.0000370f@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=shiju.jose@huawei.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox