From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <nvdimm@lists.linux.dev>,
<dan.j.williams@intel.com>, <bwidawsk@kernel.org>,
<ira.weiny@intel.com>, <vishal.l.verma@intel.com>,
<alison.schofield@intel.com>, <dave@stgolabs.net>
Subject: Re: [PATCH v2 03/19] tools/testing/cxl: Add "Get Security State" opcode support
Date: Fri, 4 Nov 2022 12:28:10 +0000 [thread overview]
Message-ID: <20221104122810.0000092c@Huawei.com> (raw)
In-Reply-To: <166377430503.430546.4463791056925632016.stgit@djiang5-desk3.ch.intel.com>
On Wed, 21 Sep 2022 08:31:45 -0700
Dave Jiang <dave.jiang@intel.com> wrote:
> Add the emulation support for handling "Get Security State" opcode for a
> CXL memory device for the cxl_test. The function will copy back device
> security state bitmask to the output payload.
>
> The security state data is added as platform_data for the mock mem device.
>
> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
FWIW LGTM
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> tools/testing/cxl/test/cxl.c | 18 ++++++++++++++++++
> tools/testing/cxl/test/mem.c | 20 ++++++++++++++++++++
> tools/testing/cxl/test/mem_pdata.h | 10 ++++++++++
> 3 files changed, 48 insertions(+)
> create mode 100644 tools/testing/cxl/test/mem_pdata.h
>
> diff --git a/tools/testing/cxl/test/cxl.c b/tools/testing/cxl/test/cxl.c
> index a072b2d3e726..6dd286a52839 100644
> --- a/tools/testing/cxl/test/cxl.c
> +++ b/tools/testing/cxl/test/cxl.c
> @@ -10,6 +10,7 @@
> #include <linux/mm.h>
> #include <cxlmem.h>
> #include "mock.h"
> +#include "mem_pdata.h"
>
> #define NR_CXL_HOST_BRIDGES 2
> #define NR_CXL_ROOT_PORTS 2
> @@ -629,8 +630,18 @@ static void mock_companion(struct acpi_device *adev, struct device *dev)
>
> static __init int cxl_test_init(void)
> {
> + struct cxl_mock_mem_pdata *mem_pdata;
> int rc, i;
>
> + /*
> + * Only a zeroed copy of this data structure is needed since no
> + * additional initialization is needed for initial state.
> + * platform_device_add_data() will make a copy of this data.
> + */
> + mem_pdata = kzalloc(sizeof(*mem_pdata), GFP_KERNEL);
> + if (!mem_pdata)
> + return -ENOMEM;
> +
> register_cxl_mock_ops(&cxl_mock_ops);
>
> cxl_mock_pool = gen_pool_create(ilog2(SZ_2M), NUMA_NO_NODE);
> @@ -735,6 +746,12 @@ static __init int cxl_test_init(void)
> pdev->dev.parent = &dport->dev;
> set_dev_node(&pdev->dev, i % 2);
>
> + rc = platform_device_add_data(pdev, mem_pdata, sizeof(*mem_pdata));
> + if (rc) {
> + platform_device_put(pdev);
> + goto err_mem;
> + }
> +
> rc = platform_device_add(pdev);
> if (rc) {
> platform_device_put(pdev);
> @@ -785,6 +802,7 @@ static __init int cxl_test_init(void)
> gen_pool_destroy(cxl_mock_pool);
> err_gen_pool_create:
> unregister_cxl_mock_ops(&cxl_mock_ops);
> + kfree(mem_pdata);
> return rc;
> }
>
> diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
> index aa2df3a15051..9002a3ae3ea5 100644
> --- a/tools/testing/cxl/test/mem.c
> +++ b/tools/testing/cxl/test/mem.c
> @@ -8,6 +8,7 @@
> #include <linux/sizes.h>
> #include <linux/bits.h>
> #include <cxlmem.h>
> +#include "mem_pdata.h"
>
> #define LSA_SIZE SZ_128K
> #define DEV_SIZE SZ_2G
> @@ -137,6 +138,22 @@ static int mock_partition_info(struct cxl_dev_state *cxlds,
> return 0;
> }
>
> +static int mock_get_security_state(struct cxl_dev_state *cxlds,
> + struct cxl_mbox_cmd *cmd)
> +{
> + struct cxl_mock_mem_pdata *mdata = dev_get_platdata(cxlds->dev);
> +
> + if (cmd->size_in)
> + return -EINVAL;
> +
> + if (cmd->size_out != sizeof(u32))
> + return -EINVAL;
> +
> + memcpy(cmd->payload_out, &mdata->security_state, sizeof(u32));
> +
> + return 0;
> +}
> +
> static int mock_get_lsa(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd)
> {
> struct cxl_mbox_get_lsa *get_lsa = cmd->payload_in;
> @@ -230,6 +247,9 @@ static int cxl_mock_mbox_send(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *
> case CXL_MBOX_OP_GET_HEALTH_INFO:
> rc = mock_health_info(cxlds, cmd);
> break;
> + case CXL_MBOX_OP_GET_SECURITY_STATE:
> + rc = mock_get_security_state(cxlds, cmd);
> + break;
> default:
> break;
> }
> diff --git a/tools/testing/cxl/test/mem_pdata.h b/tools/testing/cxl/test/mem_pdata.h
> new file mode 100644
> index 000000000000..6a7b111147eb
> --- /dev/null
> +++ b/tools/testing/cxl/test/mem_pdata.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef _MEM_PDATA_H_
> +#define _MEM_PDATA_H_
> +
> +struct cxl_mock_mem_pdata {
> + u32 security_state;
> +};
> +
> +#endif
>
>
next prev parent reply other threads:[~2022-11-04 12:28 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-21 15:31 [PATCH v2 00/19] Introduce security commands for CXL pmem device Dave Jiang
2022-09-21 15:31 ` [PATCH v2 01/19] memregion: Add cpu_cache_invalidate_memregion() interface Dave Jiang
2022-10-13 0:14 ` [PATCH v3] " Davidlohr Bueso
2022-09-21 15:31 ` [PATCH v2 02/19] cxl/pmem: Introduce nvdimm_security_ops with ->get_flags() operation Dave Jiang
2022-09-21 21:07 ` Davidlohr Bueso
2022-09-21 15:31 ` [PATCH v2 03/19] tools/testing/cxl: Add "Get Security State" opcode support Dave Jiang
2022-11-04 12:28 ` Jonathan Cameron [this message]
2022-09-21 15:31 ` [PATCH v2 04/19] cxl/pmem: Add "Set Passphrase" security command support Dave Jiang
2022-09-21 20:06 ` Davidlohr Bueso
2022-09-21 15:31 ` [PATCH v2 05/19] tools/testing/cxl: Add "Set Passphrase" opcode support Dave Jiang
2022-11-04 13:56 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 06/19] cxl/pmem: Add Disable Passphrase security command support Dave Jiang
2022-09-21 20:09 ` Davidlohr Bueso
2022-09-21 15:32 ` [PATCH v2 07/19] tools/testing/cxl: Add "Disable" security opcode support Dave Jiang
2022-11-07 14:36 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 08/19] cxl/pmem: Add "Freeze Security State" security command support Dave Jiang
2022-09-21 20:25 ` Davidlohr Bueso
2022-09-21 15:32 ` [PATCH v2 09/19] tools/testing/cxl: Add "Freeze Security State" security opcode support Dave Jiang
2022-11-07 14:44 ` Jonathan Cameron
2022-11-07 19:01 ` Dave Jiang
2022-11-11 10:27 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 10/19] cxl/pmem: Add "Unlock" security command support Dave Jiang
2022-09-21 21:49 ` Davidlohr Bueso
2022-11-07 14:55 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 11/19] tools/testing/cxl: Add "Unlock" security opcode support Dave Jiang
2022-11-07 15:00 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 12/19] cxl/pmem: Add "Passphrase Secure Erase" security command support Dave Jiang
2022-09-21 20:15 ` Davidlohr Bueso
2022-09-21 21:23 ` Dave Jiang
2022-09-29 16:56 ` Davidlohr Bueso
2022-11-07 15:25 ` Jonathan Cameron
2022-11-07 20:19 ` Dave Jiang
2022-09-21 15:32 ` [PATCH v2 13/19] tools/testing/cxl: Add "passphrase secure erase" opcode support Dave Jiang
2022-11-07 15:35 ` Jonathan Cameron
2022-11-07 21:58 ` Dave Jiang
2022-09-21 15:32 ` [PATCH v2 14/19] nvdimm/cxl/pmem: Add support for master passphrase disable security command Dave Jiang
2022-11-07 15:38 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 15/19] cxl/pmem: add id attribute to CXL based nvdimm Dave Jiang
2022-11-07 15:41 ` Jonathan Cameron
2022-09-21 15:33 ` [PATCH v2 16/19] tools/testing/cxl: add mechanism to lock mem device for testing Dave Jiang
2022-11-07 15:56 ` Jonathan Cameron
2022-11-07 22:33 ` Dave Jiang
2022-09-21 15:33 ` [PATCH v2 17/19] cxl/pmem: add provider name to cxl pmem dimm attribute group Dave Jiang
2022-11-07 15:58 ` Jonathan Cameron
2022-11-07 23:46 ` Dave Jiang
2022-09-21 15:33 ` [PATCH v2 18/19] libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag Dave Jiang
2022-11-07 16:01 ` Jonathan Cameron
2022-11-07 23:46 ` Dave Jiang
2022-09-21 15:33 ` [PATCH v2 19/19] cxl: add dimm_id support for __nvdimm_create() Dave Jiang
2022-09-23 10:31 ` Davidlohr Bueso
2022-09-23 16:18 ` Dave Jiang
2022-11-07 16:05 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221104122810.0000092c@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=nvdimm@lists.linux.dev \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox