From: Terry Bowman <terry.bowman@amd.com>
To: <alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
<ira.weiny@intel.com>, <bwidawsk@kernel.org>,
<dan.j.williams@intel.com>, <dave.jiang@intel.com>,
<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <terry.bowman@amd.com>, <rrichter@amd.com>,
<linux-kernel@vger.kernel.org>, <bhelgaas@google.com>
Subject: [PATCH v4 11/23] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport
Date: Tue, 23 May 2023 18:22:02 -0500 [thread overview]
Message-ID: <20230523232214.55282-12-terry.bowman@amd.com> (raw)
In-Reply-To: <20230523232214.55282-1-terry.bowman@amd.com>
From: Robert Richter <rrichter@amd.com>
Same as for ports, also store the downstream port's Component Register
mappings, use struct cxl_dport for that.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
---
drivers/cxl/core/port.c | 11 +++++++++++
drivers/cxl/cxl.h | 2 ++
2 files changed, 13 insertions(+)
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 34e929f1723b..db2ba0c886e2 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -708,6 +708,13 @@ static inline int cxl_port_setup_regs(struct cxl_port *port,
component_reg_phys);
}
+static inline int cxl_dport_setup_regs(struct cxl_dport *dport,
+ resource_size_t component_reg_phys)
+{
+ return cxl_setup_comp_regs(dport->dev, &dport->comp_map,
+ component_reg_phys);
+}
+
static struct cxl_port *__devm_cxl_add_port(struct device *host,
struct device *uport,
resource_size_t component_reg_phys,
@@ -986,6 +993,10 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
dport->port = port;
dport->rcrb.base = rcrb;
+ rc = cxl_dport_setup_regs(dport, component_reg_phys);
+ if (rc && rc != -ENODEV)
+ return ERR_PTR(rc);
+
cond_cxl_root_lock(port);
rc = add_dport(port, dport);
cond_cxl_root_unlock(port);
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index c76e1f84ba61..dc83c1d0396e 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -601,6 +601,7 @@ struct cxl_rcrb_info {
* struct cxl_dport - CXL downstream port
* @dev: PCI bridge or firmware device representing the downstream link
* @port: reference to cxl_port that contains this downstream port
+ * @comp_map: component register capability mappings
* @port_id: unique hardware identifier for dport in decoder target list
* @component_reg_phys: downstream port component registers
* @rch: Indicate whether this dport was enumerated in RCH or VH mode
@@ -609,6 +610,7 @@ struct cxl_rcrb_info {
struct cxl_dport {
struct device *dev;
struct cxl_port *port;
+ struct cxl_register_map comp_map;
int port_id;
resource_size_t component_reg_phys;
bool rch;
--
2.34.1
next prev parent reply other threads:[~2023-05-23 23:26 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 23:21 [PATCH v4 00/23] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-05-23 23:21 ` [PATCH v4 01/23] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-01 10:13 ` Jonathan Cameron
2023-06-02 14:16 ` Robert Richter
2023-05-23 23:21 ` [PATCH v4 02/23] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-01 10:38 ` Jonathan Cameron
2023-06-02 14:53 ` Robert Richter
2023-05-23 23:21 ` [PATCH v4 03/23] cxl: Rename member @dport of struct cxl_dport to @dev Terry Bowman
2023-06-01 10:41 ` Jonathan Cameron
2023-05-23 23:21 ` [PATCH v4 04/23] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-01 10:49 ` Jonathan Cameron
2023-06-02 15:11 ` Robert Richter
2023-05-23 23:21 ` [PATCH v4 05/23] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-01 10:52 ` Jonathan Cameron
2023-05-23 23:21 ` [PATCH v4 06/23] cxl/acpi: Moving add_host_bridge_uport() around Terry Bowman
2023-06-01 10:54 ` Jonathan Cameron
2023-05-23 23:21 ` [PATCH v4 07/23] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-01 12:45 ` Jonathan Cameron
2023-06-02 15:42 ` Robert Richter
2023-05-23 23:21 ` [PATCH v4 08/23] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-01 12:49 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 09/23] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-01 12:59 ` Jonathan Cameron
2023-06-02 15:45 ` Robert Richter
2023-05-23 23:22 ` [PATCH v4 10/23] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-01 13:06 ` Jonathan Cameron
2023-06-02 15:58 ` Robert Richter
2023-05-23 23:22 ` Terry Bowman [this message]
2023-06-01 13:07 ` [PATCH v4 11/23] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 12/23] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-01 13:07 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 13/23] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
[not found] ` <202305240842.zr8PTfcu-lkp@intel.com>
2023-05-24 9:49 ` Robert Richter
2023-06-01 13:11 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 14/23] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-01 13:27 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 15/23] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-01 13:28 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 16/23] cxl/pci: Remove Component Register base address from struct cxl_dev_state Terry Bowman
2023-06-01 13:28 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 17/23] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-01 13:36 ` Jonathan Cameron
2023-06-01 13:38 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 18/23] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-05-24 16:55 ` Bjorn Helgaas
2023-05-25 21:38 ` Terry Bowman
2023-05-23 23:22 ` [PATCH v4 19/23] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-01 13:42 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 20/23] cxl/pci: Prepare for logging RCH downstream port protocol errors Terry Bowman
2023-06-01 13:49 ` Jonathan Cameron
2023-06-01 14:06 ` Terry Bowman
2023-06-01 14:12 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 21/23] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-01 14:03 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-05-24 21:32 ` Bjorn Helgaas
2023-05-25 21:29 ` Robert Richter
2023-05-25 22:01 ` Bjorn Helgaas
2023-05-25 22:28 ` Robert Richter
2023-06-01 14:06 ` Jonathan Cameron
2023-05-23 23:22 ` [PATCH v4 23/23] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-05-24 21:45 ` Bjorn Helgaas
2023-05-25 22:08 ` Robert Richter
2023-05-26 20:31 ` Bjorn Helgaas
2023-06-01 14:11 ` Jonathan Cameron
2023-06-02 16:41 ` Robert Richter
2023-05-23 23:29 ` [PATCH v4 00/23] cxl/pci: Add support for RCH RAS error handling - CHANGELOG Terry Bowman
2023-05-24 1:39 ` [PATCH v4 00/23] cxl/pci: Add support for RCH RAS error handling Terry Bowman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230523232214.55282-12-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox