From: Robert Richter <rrichter@amd.com>
To: Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Ben Widawsky <bwidawsk@kernel.org>,
Dan Williams <dan.j.williams@intel.com>,
"Davidlohr Bueso" <dave@stgolabs.net>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Dave Jiang <dave.jiang@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Terry Bowman <terry.bowman@amd.com>,
Robert Richter <rrichter@amd.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v11 11/20] cxl/pci: Add RCH downstream port AER register discovery
Date: Wed, 27 Sep 2023 17:43:30 +0200 [thread overview]
Message-ID: <20230927154339.1600738-12-rrichter@amd.com> (raw)
In-Reply-To: <20230927154339.1600738-1-rrichter@amd.com>
From: Terry Bowman <terry.bowman@amd.com>
Restricted CXL host (RCH) downstream port AER information is not currently
logged while in the error state. One problem preventing the error logging
is the AER and RAS registers are not accessible. The CXL driver requires
changes to find RCH downstream port AER and RAS registers for purpose of
error logging.
RCH downstream ports are not enumerated during a PCI bus scan and are
instead discovered using system firmware, ACPI in this case.[1] The
downstream port is implemented as a Root Complex Register Block (RCRB).
The RCRB is a 4k memory block containing PCIe registers based on the PCIe
root port.[2] The RCRB includes AER extended capability registers used for
reporting errors. Note, the RCH's AER Capability is located in the RCRB
memory space instead of PCI configuration space, thus its register access
is different. Existing kernel PCIe AER functions can not be used to manage
the downstream port AER capabilities and RAS registers because the port was
not enumerated during PCI scan and the registers are not PCI config
accessible.
Discover RCH downstream port AER extended capability registers. Use MMIO
accesses to search for extended AER capability in RCRB register space.
[1] CXL 3.0 Spec, 9.11.2 - System Firmware View of CXL 1.1 Hierarchy
[2] CXL 3.0 Spec, 8.2.1.1 - RCH Downstream Port RCRB
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/cxl/core/core.h | 1 +
drivers/cxl/core/pci.c | 6 ++++++
drivers/cxl/core/regs.c | 35 +++++++++++++++++++++++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
index 45e7e044cf4a..f470ef5c0a6a 100644
--- a/drivers/cxl/core/core.h
+++ b/drivers/cxl/core/core.h
@@ -73,6 +73,7 @@ struct cxl_rcrb_info;
resource_size_t __rcrb_to_component(struct device *dev,
struct cxl_rcrb_info *ri,
enum cxl_rcrb which);
+u16 cxl_rcrb_to_aer(struct device *dev, resource_size_t rcrb);
extern struct rw_semaphore cxl_dpa_rwsem;
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 6ba3b7370816..4c6c5c7ba5a3 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -722,6 +722,12 @@ static bool cxl_report_and_clear(struct cxl_dev_state *cxlds)
void devm_cxl_setup_parent_dport(struct device *host, struct cxl_dport *dport)
{
+ struct device *dport_dev = dport->dport_dev;
+ struct pci_host_bridge *host_bridge;
+
+ host_bridge = to_pci_host_bridge(dport_dev);
+ if (host_bridge->native_cxl_error)
+ dport->rcrb.aer_cap = cxl_rcrb_to_aer(dport_dev, dport->rcrb.base);
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_setup_parent_dport, CXL);
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index e0fbe964f6f0..6e502f02899b 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -470,6 +470,41 @@ int cxl_setup_regs(struct cxl_register_map *map)
}
EXPORT_SYMBOL_NS_GPL(cxl_setup_regs, CXL);
+u16 cxl_rcrb_to_aer(struct device *dev, resource_size_t rcrb)
+{
+ void __iomem *addr;
+ u16 offset = 0;
+ u32 cap_hdr;
+
+ if (WARN_ON_ONCE(rcrb == CXL_RESOURCE_NONE))
+ return 0;
+
+ if (!request_mem_region(rcrb, SZ_4K, dev_name(dev)))
+ return 0;
+
+ addr = ioremap(rcrb, SZ_4K);
+ if (!addr) {
+ release_mem_region(rcrb, SZ_4K);
+ return 0;
+ }
+
+ cap_hdr = readl(addr + offset);
+ while (PCI_EXT_CAP_ID(cap_hdr) != PCI_EXT_CAP_ID_ERR) {
+ offset = PCI_EXT_CAP_NEXT(cap_hdr);
+ if (!offset)
+ break;
+ cap_hdr = readl(addr + offset);
+ }
+
+ if (offset)
+ dev_dbg(dev, "found AER extended capability (0x%x)\n", offset);
+
+ iounmap(addr);
+ release_mem_region(rcrb, SZ_4K);
+
+ return offset;
+}
+
resource_size_t __rcrb_to_component(struct device *dev, struct cxl_rcrb_info *ri,
enum cxl_rcrb which)
{
--
2.30.2
next prev parent reply other threads:[~2023-09-27 15:47 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-27 15:43 [PATCH v11 00/20] cxl/pci: Add support for RCH RAS error handling Robert Richter
2023-09-27 15:43 ` [PATCH v11 01/20] cxl/port: Fix release of RCD endpoints Robert Richter
2023-10-02 14:14 ` Jonathan Cameron
2023-09-27 15:43 ` [PATCH v11 02/20] cxl/core/regs: Rename @dev to @host in struct cxl_register_map Robert Richter
2023-10-02 14:19 ` Jonathan Cameron
2023-09-27 15:43 ` [PATCH v11 03/20] cxl/port: Fix @host confusion in cxl_dport_setup_regs() Robert Richter
2023-10-02 14:32 ` Jonathan Cameron
2023-09-27 15:43 ` [PATCH v11 04/20] cxl/port: Rename @comp_map to @reg_map in struct cxl_register_map Robert Richter
2023-10-02 14:34 ` Jonathan Cameron
2023-10-09 14:27 ` Terry Bowman
2023-09-27 15:43 ` [PATCH v11 05/20] cxl/port: Pre-initialize component register mappings Robert Richter
2023-09-27 15:43 ` [PATCH v11 06/20] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Robert Richter
2023-09-27 15:43 ` [PATCH v11 07/20] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Robert Richter
2023-10-02 14:43 ` Jonathan Cameron
2023-10-09 14:35 ` Terry Bowman
2023-10-16 14:09 ` Robert Richter
2023-09-27 15:43 ` [PATCH v11 08/20] cxl/pci: Remove Component Register base address from struct cxl_dev_state Robert Richter
2023-09-27 15:43 ` [PATCH v11 09/20] cxl/port: Remove Component Register base address from struct cxl_port Robert Richter
2023-09-27 15:43 ` [PATCH v11 10/20] cxl/pci: Introduce config option PCIEAER_CXL Robert Richter
2023-10-02 14:46 ` Jonathan Cameron
2023-10-09 14:44 ` Terry Bowman
2023-10-16 13:40 ` Terry Bowman
2023-10-16 14:08 ` Jonathan Cameron
2023-09-27 15:43 ` Robert Richter [this message]
2023-10-02 14:53 ` [PATCH v11 11/20] cxl/pci: Add RCH downstream port AER register discovery Jonathan Cameron
2023-10-09 14:55 ` Terry Bowman
2023-09-27 15:43 ` [PATCH v11 12/20] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Robert Richter
2023-09-27 15:43 ` [PATCH v11 13/20] cxl/pci: Update CXL error logging to use RAS register address Robert Richter
2023-09-27 15:43 ` [PATCH v11 14/20] cxl/pci: Map RCH downstream AER registers for logging protocol errors Robert Richter
2023-10-02 14:56 ` Jonathan Cameron
2023-10-09 14:56 ` Terry Bowman
2023-09-27 15:43 ` [PATCH v11 15/20] cxl/pci: Add RCH downstream port error logging Robert Richter
2023-09-27 15:43 ` [PATCH v11 16/20] cxl/pci: Disable root port interrupts in RCH mode Robert Richter
2023-09-27 15:43 ` [PATCH v11 17/20] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Robert Richter
2023-09-27 15:43 ` [PATCH v11 18/20] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Robert Richter
2023-09-27 15:43 ` [PATCH v11 19/20] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Robert Richter
2023-09-27 15:43 ` [PATCH v11 20/20] cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm Robert Richter
2023-10-02 15:01 ` Jonathan Cameron
2023-09-27 16:04 ` [PATCH v11 00/20] cxl/pci: Add support for RCH RAS error handling Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230927154339.1600738-12-rrichter@amd.com \
--to=rrichter@amd.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox