From: Robert Richter <rrichter@amd.com>
To: Davidlohr Bueso <dave@stgolabs.net>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Dave Jiang <dave.jiang@intel.com>,
"Alison Schofield" <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Ben Widawsky <bwidawsk@kernel.org>,
Dan Williams <dan.j.williams@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Terry Bowman <terry.bowman@amd.com>,
Robert Richter <rrichter@amd.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v12 19/20] cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
Date: Wed, 18 Oct 2023 19:17:12 +0200 [thread overview]
Message-ID: <20231018171713.1883517-20-rrichter@amd.com> (raw)
In-Reply-To: <20231018171713.1883517-1-rrichter@amd.com>
Trivial change that renames variable phys_addr in
cxl_map_component_regs() to shorten its length to keep the 80 char
size limit for the line and also for consistency between the different
paths.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/cxl/core/regs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index 9111ceef1127..cac28a656cb8 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -216,16 +216,16 @@ int cxl_map_component_regs(const struct cxl_register_map *map,
for (i = 0; i < ARRAY_SIZE(mapinfo); i++) {
struct mapinfo *mi = &mapinfo[i];
- resource_size_t phys_addr;
+ resource_size_t addr;
resource_size_t length;
if (!mi->rmap->valid)
continue;
if (!test_bit(mi->rmap->id, &map_mask))
continue;
- phys_addr = map->resource + mi->rmap->offset;
+ addr = map->resource + mi->rmap->offset;
length = mi->rmap->size;
- *(mi->addr) = devm_cxl_iomap_block(host, phys_addr, length);
+ *(mi->addr) = devm_cxl_iomap_block(host, addr, length);
if (!*(mi->addr))
return -ENOMEM;
}
--
2.30.2
next prev parent reply other threads:[~2023-10-18 17:20 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 17:16 [PATCH v12 00/20] cxl/pci: Add support for RCH RAS error handling Robert Richter
2023-10-18 17:16 ` [PATCH v12 01/20] cxl/port: Fix release of RCD endpoints Robert Richter
2023-10-27 3:46 ` Dan Williams
2023-10-27 22:55 ` Robert Richter
2023-10-28 0:32 ` Dan Williams
2023-10-28 1:39 ` Dan Williams
2023-10-29 16:17 ` Robert Richter
2023-10-18 17:16 ` [PATCH v12 02/20] cxl/core/regs: Rename @dev to @host in struct cxl_register_map Robert Richter
2023-10-27 20:04 ` Dan Williams
2023-10-18 17:16 ` [PATCH v12 03/20] cxl/port: Fix @host confusion in cxl_dport_setup_regs() Robert Richter
2023-10-18 17:16 ` [PATCH v12 04/20] cxl/port: Rename @comp_map to @reg_map in struct cxl_register_map Robert Richter
2023-10-18 17:16 ` [PATCH v12 05/20] cxl/port: Pre-initialize component register mappings Robert Richter
2023-10-18 17:16 ` [PATCH v12 06/20] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Robert Richter
2023-10-18 17:17 ` [PATCH v12 07/20] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Robert Richter
2023-10-27 21:51 ` Dan Williams
2023-10-18 17:17 ` [PATCH v12 08/20] cxl/pci: Remove Component Register base address from struct cxl_dev_state Robert Richter
2023-10-27 21:54 ` Dan Williams
2023-10-18 17:17 ` [PATCH v12 09/20] cxl/port: Remove Component Register base address from struct cxl_port Robert Richter
2023-10-18 17:17 ` [PATCH v12 10/20] cxl/pci: Introduce config option PCIEAER_CXL Robert Richter
2023-10-19 14:30 ` Jonathan Cameron
2023-10-20 22:36 ` Robert Richter
2023-10-27 22:02 ` Dan Williams
2023-10-18 17:17 ` [PATCH v12 11/20] cxl/pci: Add RCH downstream port AER register discovery Robert Richter
2023-10-27 22:12 ` Dan Williams
2023-10-18 17:17 ` [PATCH v12 12/20] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Robert Richter
2023-10-18 17:17 ` [PATCH v12 13/20] cxl/pci: Update CXL error logging to use RAS register address Robert Richter
2023-10-18 17:17 ` [PATCH v12 14/20] cxl/pci: Map RCH downstream AER registers for logging protocol errors Robert Richter
2023-10-27 22:16 ` Dan Williams
2023-10-28 3:23 ` Dan Williams
2023-10-18 17:17 ` [PATCH v12 15/20] cxl/pci: Add RCH downstream port error logging Robert Richter
2023-10-18 17:17 ` [PATCH v12 16/20] cxl/pci: Disable root port interrupts in RCH mode Robert Richter
2023-10-18 17:17 ` [PATCH v12 17/20] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Robert Richter
2023-10-18 17:17 ` [PATCH v12 18/20] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Robert Richter
2023-10-18 17:17 ` Robert Richter [this message]
2023-10-18 17:17 ` [PATCH v12 20/20] cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018171713.1883517-20-rrichter@amd.com \
--to=rrichter@amd.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox