[PATCH 2/2] cxl/cdat: Fix header sum value in CDAT checksum

[Ira Weiny <ira.weiny@intel.com>]

The addition of the DCD support for CXL type-3 devices extended the CDAT
table large enough that the checksum being returned was incorrect.[1]

This was because the checksum value was using the header length field
rather than each of the 4 bytes of the length field.  This was
previously not seen because the length of the CDAT data was less than
256 thus resulting in an equivalent checksum value.

Properly calculate the checksum for the CDAT header.

[1] https://lore.kernel.org/all/20231116-fix-cdat-devm-free-v1-1-b148b40707d7@intel.com/

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
---
 hw/cxl/cxl-cdat.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/hw/cxl/cxl-cdat.c b/hw/cxl/cxl-cdat.c
index 24829cf2428d..d93e2e4e64f2 100644
--- a/hw/cxl/cxl-cdat.c
+++ b/hw/cxl/cxl-cdat.c
@@ -95,8 +95,15 @@ static void ct3_build_cdat(CDATObject *cdat, Error **errp)
     /* For now, no runtime updates */
     cdat_header->sequence = 0;
     cdat_header->length += sizeof(CDATTableHeader);
-    sum += cdat_header->revision + cdat_header->sequence +
-        cdat_header->length;
+
+    do {
+        uint8_t *buf = (uint8_t *)cdat_header;
+
+        for (i = 0; i < sizeof(*cdat_header); i++) {
+            sum += buf[i];
+        }
+    } while (0);
+
     /* Sum of all bytes including checksum must be 0 */
     cdat_header->checksum = ~sum + 1;
 

-- 
2.41.0