From: "Fabio M. De Francesco" <fabio.m.de.francesco@linux.intel.com>
To: Davidlohr Bueso <dave@stgolabs.net>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Dave Jiang <dave.jiang@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Fabio M. De Francesco" <fabio.m.de.francesco@linux.intel.com>
Subject: [PATCH] cxl/acpi: Warn on unsupported platform config detection
Date: Wed, 19 Jun 2024 14:59:41 +0200 [thread overview]
Message-ID: <20240619125949.167936-1-fabio.m.de.francesco@linux.intel.com> (raw)
Each Host Bridge instance has a corresponding CXL Host Bridge Structure
(CHBS) ACPI table that identifies its capabilities. CHBS tables can be
two types: RCRB and CHBCR.
If a Host Bridge is attached to a device that is operating in Restricted
CXL Device Mode (RCD), BIOS publishes an RCRB with the base address of
registers that describe its capabilities.
However, the new (CXL 2.0+) Component registers (e.g., Extended Security
Capability), can only be accessed by means of a base address published
with a CHBCR.
An algorithm to locate a CHBCR associated with an RCRB would be too
invasive to land without some concrete motivation.
Therefore, just print a message to inform of unsupported config.
Count how many different CHBS "Version" types are detected by
cxl_get_chbs_iter(). Then make cxl_get_chbs() print a warning if that sum
is greater than 1.
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
---
drivers/cxl/acpi.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index 571069863c62..9e226a65a5ea 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -482,6 +482,7 @@ struct cxl_chbs_context {
unsigned long long uid;
resource_size_t base;
u32 cxl_version;
+ int count;
};
static int cxl_get_chbs_iter(union acpi_subtable_headers *header, void *arg,
@@ -490,10 +491,17 @@ static int cxl_get_chbs_iter(union acpi_subtable_headers *header, void *arg,
struct cxl_chbs_context *ctx = arg;
struct acpi_cedt_chbs *chbs;
- if (ctx->base != CXL_RESOURCE_NONE)
+ chbs = (struct acpi_cedt_chbs *) header;
+
+ if (chbs->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11 &&
+ chbs->length != CXL_RCRB_SIZE)
return 0;
- chbs = (struct acpi_cedt_chbs *) header;
+ if (ctx->cxl_version != chbs->cxl_version)
+ ctx->count++;
+
+ if (ctx->base != CXL_RESOURCE_NONE)
+ return 0;
if (ctx->uid != chbs->uid)
return 0;
@@ -502,10 +510,6 @@ static int cxl_get_chbs_iter(union acpi_subtable_headers *header, void *arg,
if (!chbs->base)
return 0;
- if (chbs->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11 &&
- chbs->length != CXL_RCRB_SIZE)
- return 0;
-
ctx->base = chbs->base;
return 0;
@@ -533,6 +537,10 @@ static int cxl_get_chbs(struct device *dev, struct acpi_device *hb,
acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbs_iter, ctx);
+ if (ctx->count > 1)
+ /* Disclaim eRCD support given some component register may only be found via CHBCR */
+ dev_info(dev, "Unsupported platform config, mixed Virtual Host and Restricted CXL Host hierarchy.");
+
return 0;
}
--
2.45.2
next reply other threads:[~2024-06-19 13:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-19 12:59 Fabio M. De Francesco [this message]
2024-06-21 20:57 ` [PATCH] cxl/acpi: Warn on unsupported platform config detection Alison Schofield
2024-06-25 23:41 ` Dan Williams
2024-06-26 10:00 ` Fabio M. De Francesco
2024-06-25 23:14 ` Dan Williams
2024-06-26 10:28 ` Fabio M. De Francesco
2024-06-26 0:10 ` Alison Schofield
2024-06-26 0:45 ` Dan Williams
2024-06-26 10:31 ` Fabio M. De Francesco
2024-06-27 1:09 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240619125949.167936-1-fabio.m.de.francesco@linux.intel.com \
--to=fabio.m.de.francesco@linux.intel.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox