From: Dave Jiang <dave.jiang@intel.com>
To: linux-cxl@vger.kernel.org
Cc: dan.j.williams@intel.com, ira.weiny@intel.com,
vishal.l.verma@intel.com, alison.schofield@intel.com,
Jonathan.Cameron@huawei.com, dave@stgolabs.net, jgg@nvidia.com,
shiju.jose@huawei.com
Subject: [PATCH v3 15/16] cxl/test: Add Set Feature support to cxl_test
Date: Tue, 4 Feb 2025 15:03:16 -0700 [thread overview]
Message-ID: <20250204220430.4146187-16-dave.jiang@intel.com> (raw)
In-Reply-To: <20250204220430.4146187-1-dave.jiang@intel.com>
Add emulation to support Set Feature mailbox command to cxl_test.
The only feature supported is the device patrol scrub feature. The
set feature allows activation of patrol scrub for the cxl_test
emulated device. The command does not support partial data transfer
even though the spec allows it. This restriction is to reduce complexity
of the emulation given the patrol scrub feature is very minimal.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
tools/testing/cxl/test/mem.c | 50 ++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
index aab5905b56c3..53091ba39978 100644
--- a/tools/testing/cxl/test/mem.c
+++ b/tools/testing/cxl/test/mem.c
@@ -52,6 +52,10 @@ static struct cxl_cel_entry mock_cel[] = {
.opcode = cpu_to_le16(CXL_MBOX_OP_GET_FEATURE),
.effect = CXL_CMD_EFFECT_NONE,
},
+ {
+ .opcode = cpu_to_le16(CXL_MBOX_OP_SET_FEATURE),
+ .effect = cpu_to_le16(EFFECT(CONF_CHANGE_IMMEDIATE)),
+ },
{
.opcode = cpu_to_le16(CXL_MBOX_OP_IDENTIFY),
.effect = CXL_CMD_EFFECT_NONE,
@@ -1410,6 +1414,49 @@ static int mock_get_feature(struct cxl_mockmem_data *mdata,
return -EOPNOTSUPP;
}
+static int mock_set_test_feature(struct cxl_mockmem_data *mdata,
+ struct cxl_mbox_cmd *cmd)
+{
+ struct cxl_mbox_set_feat_in *input = cmd->payload_in;
+ struct vendor_test_feat *test = (struct vendor_test_feat *)input->data;
+ u32 action;
+
+ action = FIELD_GET(CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK,
+ le32_to_cpu(input->hdr.flags));
+ /*
+ * While it is spec compliant to support other set actions, it is not
+ * necessary to add the complication in the emulation currently. Reject
+ * anything besides full xfer.
+ */
+ if (action != CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER) {
+ cmd->return_code = CXL_MBOX_CMD_RC_INPUT;
+ return -EINVAL;
+ }
+
+ /* Offset should be reserved when doing full transfer */
+ if (input->hdr.offset) {
+ cmd->return_code = CXL_MBOX_CMD_RC_INPUT;
+ return -EINVAL;
+ }
+
+ memcpy(&mdata->test_feat.data, &test->data, sizeof(u32));
+
+ return 0;
+}
+
+static int mock_set_feature(struct cxl_mockmem_data *mdata,
+ struct cxl_mbox_cmd *cmd)
+{
+ struct cxl_mbox_set_feat_in *input = cmd->payload_in;
+
+ if (uuid_equal(&input->hdr.uuid, &CXL_VENDOR_FEATURE_TEST))
+ return mock_set_test_feature(mdata, cmd);
+
+ cmd->return_code = CXL_MBOX_CMD_RC_UNSUPPORTED;
+
+ return -EOPNOTSUPP;
+}
+
static int mock_get_supported_features(struct cxl_mockmem_data *mdata,
struct cxl_mbox_cmd *cmd)
{
@@ -1543,6 +1590,9 @@ static int cxl_mock_mbox_send(struct cxl_mailbox *cxl_mbox,
case CXL_MBOX_OP_GET_FEATURE:
rc = mock_get_feature(mdata, cmd);
break;
+ case CXL_MBOX_OP_SET_FEATURE:
+ rc = mock_set_feature(mdata, cmd);
+ break;
default:
break;
}
--
2.48.1
next prev parent reply other threads:[~2025-02-04 22:05 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-04 22:03 [PATCH v3 00/16] cxl: Add CXL feature commands support via fwctl Dave Jiang
2025-02-04 22:03 ` [PATCH v3 01/16] cxl: Refactor user ioctl command path from mds to mailbox Dave Jiang
2025-02-05 17:41 ` Jonathan Cameron
2025-02-05 17:52 ` Dave Jiang
2025-02-07 5:47 ` Li Ming
2025-02-04 22:03 ` [PATCH v3 02/16] cxl: Enumerate feature commands Dave Jiang
2025-02-04 23:34 ` Dan Williams
2025-02-04 22:03 ` [PATCH v3 03/16] cxl: Add Get Supported Features command for kernel usage Dave Jiang
2025-02-04 23:50 ` Dan Williams
2025-02-07 5:42 ` Li Ming
2025-02-08 0:03 ` Dave Jiang
2025-02-04 22:03 ` [PATCH v3 04/16] cxl/test: Add Get Supported Features mailbox command support Dave Jiang
2025-02-07 5:51 ` Li Ming
2025-02-04 22:03 ` [PATCH v3 05/16] cxl/mbox: Add GET_FEATURE mailbox command Dave Jiang
2025-02-05 0:54 ` Dan Williams
2025-02-05 17:57 ` Jonathan Cameron
2025-02-05 23:12 ` Dan Williams
2025-02-06 11:03 ` Jonathan Cameron
2025-02-07 20:18 ` Dan Williams
2025-02-07 6:18 ` Li Ming
2025-02-04 22:03 ` [PATCH v3 06/16] cxl/mbox: Add SET_FEATURE " Dave Jiang
2025-02-04 22:03 ` [PATCH v3 07/16] cxl: Setup exclusive CXL features that are reserved for the kernel Dave Jiang
2025-02-04 22:03 ` [PATCH v3 08/16] cxl: Add FWCTL support to the CXL memdev driver Dave Jiang
2025-02-05 1:18 ` Dan Williams
2025-02-04 22:03 ` [PATCH v3 09/16] cxl: Add support for FWCTL get driver information callback Dave Jiang
2025-02-05 1:27 ` Dan Williams
2025-02-04 22:03 ` [PATCH v3 10/16] cxl: Move cxl feature command structs to user header Dave Jiang
2025-02-04 22:03 ` [PATCH v3 11/16] cxl: Add support for fwctl RPC command to enable CXL feature commands Dave Jiang
2025-02-05 1:41 ` Dan Williams
2025-02-04 22:03 ` [PATCH v3 12/16] cxl: Add support to handle user feature commands for get feature Dave Jiang
2025-02-04 22:03 ` [PATCH v3 13/16] cxl: Add support to handle user feature commands for set feature Dave Jiang
2025-02-04 22:03 ` [PATCH v3 14/16] cxl/test: Add Get Feature support to cxl_test Dave Jiang
2025-02-04 22:03 ` Dave Jiang [this message]
2025-02-04 22:03 ` [PATCH v3 16/16] fwctl/cxl: Add documentation to FWCTL CXL Dave Jiang
2025-02-05 1:50 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250204220430.4146187-16-dave.jiang@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jgg@nvidia.com \
--cc=linux-cxl@vger.kernel.org \
--cc=shiju.jose@huawei.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox