[PATCH v6 14/14] fwctl/cxl: Add documentation to FWCTL CXL

[Dave Jiang <dave.jiang@intel.com>]

Add policy and operational documentation for FWCTL CXL.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
v6:
- Updated user example due to kernel changes
---
 .../userspace-api/fwctl/fwctl-cxl.rst         | 144 ++++++++++++++++++
 Documentation/userspace-api/fwctl/index.rst   |   1 +
 MAINTAINERS                                   |   1 +
 3 files changed, 146 insertions(+)
 create mode 100644 Documentation/userspace-api/fwctl/fwctl-cxl.rst

diff --git a/Documentation/userspace-api/fwctl/fwctl-cxl.rst b/Documentation/userspace-api/fwctl/fwctl-cxl.rst
new file mode 100644
index 000000000000..4e7b4bae0057
--- /dev/null
+++ b/Documentation/userspace-api/fwctl/fwctl-cxl.rst
@@ -0,0 +1,144 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+fwctl cxl driver
+================
+
+:Author: Dave Jiang
+
+Overview
+========
+
+The CXL spec defines a set of commands that can be issued to the mailbox of a
+CXL device or switch. It also left room for vendor specific commands to be
+issued to the mailbox as well. fwctl provides a path to issue a set of allowed
+mailbox commands from user space to the device moderated by the kernel driver.
+
+The following 3 commands will be used to support CXL Features:
+CXL spec r3.1 8.2.9.6.1 Get Supported Features (Opcode 0500h)
+CXL spec r3.1 8.2.9.6.2 Get Feature (Opcode 0501h)
+CXL spec r3.1 8.2.9.6.3 Set Feature (Opcode 0502h)
+
+The "Get Supported Features" return data may be filtered by the kernel driver to
+drop any features that are forbidden by the kernel or being exclusively used by
+the kernel. The driver will set the "Set Feature Size" of the "Get Supported
+Features Supported Feature Entry" to 0 to indicate that the Feature cannot be
+modified. The "Get Supported Features" command and the "Get Features" falls
+under the fwctl policy of FWCTL_RPC_CONFIGURATION.
+
+For "Set Feature" command, the access policy currently is broken down into two
+categories depending on the Set Feature effects reported by the device. If the
+Set Feature will cause immediate change to the device, the fwctl access policy
+must be FWCTL_RPC_DEBUG_WRITE_FULL. The effects for this level are
+"immediate config change", "immediate data change", "immediate policy change",
+or "immediate log change" for the set effects mask. If the effects are "config
+change with cold reset" or "config change with conventional reset", then the
+fwctl access policy must be FWCTL_RPC_DEBUG_WRITE or higher.
+
+fwctl cxl User API
+==================
+
+.. kernel-doc:: include/uapi/fwctl/cxl.h
+.. kernel-doc:: include/uapi/cxl/features.h
+
+1. Driver info query
+--------------------
+
+First step for the app is to issue the ioctl(FWCTL_CMD_INFO). Successful
+invocation of the ioctl implies the Features capability is operational and
+returns an all zeros 32bit payload. A ``struct fwctl_info`` needs to be filled
+out with the ``fwctl_info.out_device_type`` set to ``FWCTL_DEVICE_TYPE_CXL``.
+The return data should be ``struct fwctl_info_cxl`` that contains a reserved
+32bit field that should be all zeros.
+
+2. Send hardware commands
+-------------------------
+
+Next step is to send the 'Get Supported Features' command to the driver from
+user space via ioctl(FWCTL_RPC). A ``struct fwctl_rpc_cxl`` is pointed to
+by ``fwctl_rpc.in``. ``struct fwctl_rpc_cxl.in_payload`` points to
+the hardware input structure that is defined by the CXL spec. ``fwctl_rpc.out``
+points to the buffer that contains a ``struct fwctl_rpc_cxl_out`` that includes
+the hardware output data inlined as ``fwctl_rpc_cxl_out.payload``. This command
+is called twice. First time to retrieve the number of features supported.
+A second time to retrieve the specific feature details as the output data.
+
+After getting the specific feature details, a Get/Set Feature command can be
+appropriately programmed and sent. For a "Set Feature" command, the retrieved
+feature info contains an effects field that details the resulting
+"Set Feature" command will trigger. That will inform the user whether
+the system is configured to allowed the "Set Feature" command or not.
+
+Code example of a Get Feature
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+        static int cxl_fwctl_rpc_get_test_feature(int fd, struct test_feature *feat_ctx,
+                                                  const uint32_t expected_data)
+        {
+                struct cxl_mbox_get_feat_in *feat_in;
+                struct fwctl_rpc_cxl_out *out;
+                struct fwctl_rpc rpc = {0};
+                struct fwctl_rpc_cxl *in;
+                size_t out_size, in_size;
+                uint32_t val;
+                void *data;
+                int rc;
+
+                in_size = sizeof(*in) + sizeof(*feat_in);
+                rc = posix_memalign((void **)&in, 16, in_size);
+                if (rc)
+                        return -ENOMEM;
+                memset(in, 0, in_size);
+                feat_in = &in->get_feat_in;
+
+                uuid_copy(feat_in->uuid, feat_ctx->uuid);
+                feat_in->count = feat_ctx->get_size;
+
+                out_size = sizeof(*out) + feat_ctx->get_size;
+                rc = posix_memalign((void **)&out, 16, out_size);
+                if (rc)
+                        goto free_in;
+                memset(out, 0, out_size);
+
+                in->opcode = CXL_MBOX_OPCODE_GET_FEATURE;
+                in->op_size = sizeof(*feat_in);
+
+                rpc.size = sizeof(rpc);
+                rpc.scope = FWCTL_RPC_CONFIGURATION;
+                rpc.in_len = in_size;
+                rpc.out_len = out_size;
+                rpc.in = (uint64_t)(uint64_t *)in;
+                rpc.out = (uint64_t)(uint64_t *)out;
+
+                rc = send_command(fd, &rpc, out);
+                if (rc)
+                        goto free_all;
+
+                data = out->payload;
+                val = le32toh(*(__le32 *)data);
+                if (memcmp(&val, &expected_data, sizeof(val)) != 0) {
+                        rc = -ENXIO;
+                        goto free_all;
+                }
+
+        free_all:
+                free(out);
+        free_in:
+                free(in);
+                return rc;
+        }
+
+Take a look at CXL CLI test directory
+<https://github.com/pmem/ndctl/tree/main/test/fwctl.c> for a detailed user code
+for examples on how to exercise this path.
+
+
+fwctl cxl Kernel API
+====================
+
+.. kernel-doc:: drivers/cxl/core/features.c
+.. kernel-doc:: drivers/cxl/features.c
+   :export:
+.. kernel-doc:: include/cxl/features.h
diff --git a/Documentation/userspace-api/fwctl/index.rst b/Documentation/userspace-api/fwctl/index.rst
index 06959fbf1547..d9d40a468a31 100644
--- a/Documentation/userspace-api/fwctl/index.rst
+++ b/Documentation/userspace-api/fwctl/index.rst
@@ -10,3 +10,4 @@ to securely construct and execute RPCs inside device firmware.
    :maxdepth: 1
 
    fwctl
+   fwctl-cxl
diff --git a/MAINTAINERS b/MAINTAINERS
index 413ab79bf2f4..b450c960687c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5837,6 +5837,7 @@ M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-cxl@vger.kernel.org
 S:	Maintained
 F:	Documentation/driver-api/cxl
+F:	Documentation/userspace-api/fwctl/fwctl-cxl.rst
 F:	drivers/cxl/
 F:	include/cxl/
 F:	include/uapi/linux/cxl_mem.h
-- 
2.48.1