From: Dongsheng Yang <dongsheng.yang@linux.dev>
To: mpatocka@redhat.com, agk@redhat.com, snitzer@kernel.org,
axboe@kernel.dk, hch@lst.de, dan.j.williams@intel.com,
Jonathan.Cameron@Huawei.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-cxl@vger.kernel.org, nvdimm@lists.linux.dev,
dm-devel@lists.linux.dev,
Dongsheng Yang <dongsheng.yang@linux.dev>
Subject: [PATCH v1 00/11] dm-pcache – persistent-memory cache for block devices
Date: Tue, 24 Jun 2025 07:33:47 +0000 [thread overview]
Message-ID: <20250624073359.2041340-1-dongsheng.yang@linux.dev> (raw)
Hi Mikulas,
This is V1 for dm-pcache, please take a look.
Code:
https://github.com/DataTravelGuide/linux tags/pcache_v1
Changelogs from RFC-V2:
- use crc32c to replace crc32
- only retry pcache_req when cache full, add pcache_req into defer_list,
and wait cache invalidation happen.
- new format for pcache table, it is more easily extended with
new parameters later.
- remove __packed.
- use spin_lock_irq in req_complete_fn to replace
spin_lock_irqsave.
- fix bug in backing_dev_bio_end with spin_lock_irqsave.
- queue_work() inside spinlock.
- introduce inline_bvecs in backing_dev_req.
- use kmalloc_array for bvecs allocation.
- calculate ->off with dm_target_offset() before use it.
Dongsheng Yang (11):
dm-pcache: add pcache_internal.h
dm-pcache: add backing device management
dm-pcache: add cache device
dm-pcache: add segment layer
dm-pcache: add cache_segment
dm-pcache: add cache_writeback
dm-pcache: add cache_gc
dm-pcache: add cache_key
dm-pcache: add cache_req
dm-pcache: add cache core
dm-pcache: initial dm-pcache target
.../admin-guide/device-mapper/dm-pcache.rst | 201 ++++
MAINTAINERS | 8 +
drivers/md/Kconfig | 2 +
drivers/md/Makefile | 1 +
drivers/md/dm-pcache/Kconfig | 17 +
drivers/md/dm-pcache/Makefile | 3 +
drivers/md/dm-pcache/backing_dev.c | 292 ++++++
drivers/md/dm-pcache/backing_dev.h | 88 ++
drivers/md/dm-pcache/cache.c | 444 +++++++++
drivers/md/dm-pcache/cache.h | 607 ++++++++++++
drivers/md/dm-pcache/cache_dev.c | 299 ++++++
drivers/md/dm-pcache/cache_dev.h | 70 ++
drivers/md/dm-pcache/cache_gc.c | 170 ++++
drivers/md/dm-pcache/cache_key.c | 907 ++++++++++++++++++
drivers/md/dm-pcache/cache_req.c | 810 ++++++++++++++++
drivers/md/dm-pcache/cache_segment.c | 293 ++++++
drivers/md/dm-pcache/cache_writeback.c | 276 ++++++
drivers/md/dm-pcache/dm_pcache.c | 467 +++++++++
drivers/md/dm-pcache/dm_pcache.h | 65 ++
drivers/md/dm-pcache/pcache_internal.h | 116 +++
drivers/md/dm-pcache/segment.c | 61 ++
drivers/md/dm-pcache/segment.h | 73 ++
22 files changed, 5270 insertions(+)
create mode 100644 Documentation/admin-guide/device-mapper/dm-pcache.rst
create mode 100644 drivers/md/dm-pcache/Kconfig
create mode 100644 drivers/md/dm-pcache/Makefile
create mode 100644 drivers/md/dm-pcache/backing_dev.c
create mode 100644 drivers/md/dm-pcache/backing_dev.h
create mode 100644 drivers/md/dm-pcache/cache.c
create mode 100644 drivers/md/dm-pcache/cache.h
create mode 100644 drivers/md/dm-pcache/cache_dev.c
create mode 100644 drivers/md/dm-pcache/cache_dev.h
create mode 100644 drivers/md/dm-pcache/cache_gc.c
create mode 100644 drivers/md/dm-pcache/cache_key.c
create mode 100644 drivers/md/dm-pcache/cache_req.c
create mode 100644 drivers/md/dm-pcache/cache_segment.c
create mode 100644 drivers/md/dm-pcache/cache_writeback.c
create mode 100644 drivers/md/dm-pcache/dm_pcache.c
create mode 100644 drivers/md/dm-pcache/dm_pcache.h
create mode 100644 drivers/md/dm-pcache/pcache_internal.h
create mode 100644 drivers/md/dm-pcache/segment.c
create mode 100644 drivers/md/dm-pcache/segment.h
--
2.43.0
next reply other threads:[~2025-06-24 7:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-24 7:33 Dongsheng Yang [this message]
2025-06-24 7:33 ` [PATCH v1 01/11] dm-pcache: add pcache_internal.h Dongsheng Yang
2025-07-01 13:43 ` Jonathan Cameron
2025-06-24 7:33 ` [PATCH v1 02/11] dm-pcache: add backing device management Dongsheng Yang
2025-07-01 13:56 ` Jonathan Cameron
2025-07-07 6:25 ` Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 03/11] dm-pcache: add cache device Dongsheng Yang
2025-07-01 14:07 ` Jonathan Cameron
2025-06-24 7:33 ` [PATCH v1 04/11] dm-pcache: add segment layer Dongsheng Yang
2025-07-01 14:46 ` Jonathan Cameron
2025-07-07 6:24 ` Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 05/11] dm-pcache: add cache_segment Dongsheng Yang
2025-07-01 14:59 ` Jonathan Cameron
2025-07-07 6:24 ` Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 06/11] dm-pcache: add cache_writeback Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 07/11] dm-pcache: add cache_gc Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 08/11] dm-pcache: add cache_key Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 09/11] dm-pcache: add cache_req Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 10/11] dm-pcache: add cache core Dongsheng Yang
2025-06-24 7:33 ` [PATCH v1 11/11] dm-pcache: initial dm-pcache target Dongsheng Yang
2025-06-30 13:30 ` [PATCH v1 00/11] dm-pcache – persistent-memory cache for block devices Mikulas Patocka
2025-06-30 13:40 ` Dongsheng Yang
2025-06-30 14:16 ` Dongsheng Yang
2025-06-30 15:45 ` Mikulas Patocka
2025-06-30 16:30 ` Dongsheng Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250624073359.2041340-1-dongsheng.yang@linux.dev \
--to=dongsheng.yang@linux.dev \
--cc=Jonathan.Cameron@Huawei.com \
--cc=agk@redhat.com \
--cc=axboe@kernel.dk \
--cc=dan.j.williams@intel.com \
--cc=dm-devel@lists.linux.dev \
--cc=hch@lst.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpatocka@redhat.com \
--cc=nvdimm@lists.linux.dev \
--cc=snitzer@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox