From: Alejandro Lucero Palau <alucerop@amd.com>
To: Alison Schofield <alison.schofield@intel.com>,
alejandro.lucero-palau@amd.com
Cc: linux-cxl@vger.kernel.org, netdev@vger.kernel.org,
dan.j.williams@intel.com, martin.habets@xilinx.com,
edward.cree@amd.com, davem@davemloft.net, kuba@kernel.org,
pabeni@redhat.com, edumazet@google.com
Subject: Re: [PATCH v5 01/27] cxl: add type2 device basic support
Date: Fri, 22 Nov 2024 09:27:34 +0000 [thread overview]
Message-ID: <6c039777-3455-eacc-8d7a-a248f7437c95@amd.com> (raw)
In-Reply-To: <Z0AKKKdMh9Q06X7e@aschofie-mobl2.lan>
On 11/22/24 04:35, Alison Schofield wrote:
> On Mon, Nov 18, 2024 at 04:44:08PM +0000, alejandro.lucero-palau@amd.com wrote:
>> From: Alejandro Lucero <alucerop@amd.com>
>>
>> Differentiate Type3, aka memory expanders, from Type2, aka device
>> accelerators, with a new function for initializing cxl_dev_state.
>>
>> Create accessors to cxl_dev_state to be used by accel drivers.
>>
>> Based on previous work by Dan Williams [1]
>>
>> Link: [1] https://lore.kernel.org/linux-cxl/168592160379.1948938.12863272903570476312.stgit@dwillia2-xfh.jf.intel.com/
>> Signed-off-by: Alejandro Lucero <alucerop@amd.com>
>> Co-developed-by: Dan Williams <dan.j.williams@intel.com>
>> ---
>> drivers/cxl/core/memdev.c | 51 +++++++++++++++++++++++++++++++++++++++
>> drivers/cxl/core/pci.c | 1 +
>> drivers/cxl/cxlpci.h | 16 ------------
>> drivers/cxl/pci.c | 13 +++++++---
>> include/cxl/cxl.h | 21 ++++++++++++++++
> As I mentioned in the cover letter, beginning w the first patch
> I have depmod issues building with the cxl-test module. I didn't
> get very far figuring it out, other than a work-around of moving
> the contents of include/cxl/cxl.h down into drivers/cxl/cxlmem.h.
> That band-aid got me a bit further. In fact I wasn't so concerned
> with breaking sfx as I was with regression testing the changes to
> drivers/cxl/.
>
> Please see if you can get the cxl-test module working again.
Hi Allison,
I have no problems building tools/testing/cxl and I can see cxl_test.ko
in tools/testing/cxl/test
I did try with the full patchset applied over 6.12-rc7 tag, and also
with only the first patch since I was not sure if you meant the build
after each patch is tried, but both worked once I modified the config
for the checks inside config_check.c not to fail.
I guess you meant this cxl test and not the one related to "git clone
https://github.com/moking/cxl-test-tool.git" what I have no experience with.
Could someone else try this as well?
>
>> include/cxl/pci.h | 23 ++++++++++++++++++
>> 6 files changed, 105 insertions(+), 20 deletions(-)
>> create mode 100644 include/cxl/cxl.h
>> create mode 100644 include/cxl/pci.h
>>
>> diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
>> index 84fefb76dafa..d083fd13a6dd 100644
>> --- a/drivers/cxl/core/memdev.c
>> +++ b/drivers/cxl/core/memdev.c
>> @@ -1,6 +1,7 @@
>> // SPDX-License-Identifier: GPL-2.0-only
>> /* Copyright(c) 2020 Intel Corporation. */
>>
>> +#include <cxl/cxl.h>
>> #include <linux/io-64-nonatomic-lo-hi.h>
>> #include <linux/firmware.h>
>> #include <linux/device.h>
>> @@ -616,6 +617,25 @@ static void detach_memdev(struct work_struct *work)
>>
>> static struct lock_class_key cxl_memdev_key;
>>
>> +struct cxl_dev_state *cxl_accel_state_create(struct device *dev)
>> +{
>> + struct cxl_dev_state *cxlds;
>> +
>> + cxlds = kzalloc(sizeof(*cxlds), GFP_KERNEL);
>> + if (!cxlds)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + cxlds->dev = dev;
>> + cxlds->type = CXL_DEVTYPE_DEVMEM;
>> +
>> + cxlds->dpa_res = DEFINE_RES_MEM_NAMED(0, 0, "dpa");
>> + cxlds->ram_res = DEFINE_RES_MEM_NAMED(0, 0, "ram");
>> + cxlds->pmem_res = DEFINE_RES_MEM_NAMED(0, 0, "pmem");
>> +
>> + return cxlds;
>> +}
>> +EXPORT_SYMBOL_NS_GPL(cxl_accel_state_create, CXL);
>> +
>> static struct cxl_memdev *cxl_memdev_alloc(struct cxl_dev_state *cxlds,
>> const struct file_operations *fops)
>> {
>> @@ -693,6 +713,37 @@ static int cxl_memdev_open(struct inode *inode, struct file *file)
>> return 0;
>> }
>>
>> +void cxl_set_dvsec(struct cxl_dev_state *cxlds, u16 dvsec)
>> +{
>> + cxlds->cxl_dvsec = dvsec;
>> +}
>> +EXPORT_SYMBOL_NS_GPL(cxl_set_dvsec, CXL);
>> +
>> +void cxl_set_serial(struct cxl_dev_state *cxlds, u64 serial)
>> +{
>> + cxlds->serial = serial;
>> +}
>> +EXPORT_SYMBOL_NS_GPL(cxl_set_serial, CXL);
>> +
>> +int cxl_set_resource(struct cxl_dev_state *cxlds, struct resource res,
>> + enum cxl_resource type)
>> +{
>> + switch (type) {
>> + case CXL_RES_DPA:
>> + cxlds->dpa_res = res;
>> + return 0;
>> + case CXL_RES_RAM:
>> + cxlds->ram_res = res;
>> + return 0;
>> + case CXL_RES_PMEM:
>> + cxlds->pmem_res = res;
>> + return 0;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +EXPORT_SYMBOL_NS_GPL(cxl_set_resource, CXL);
>> +
>> static int cxl_memdev_release_file(struct inode *inode, struct file *file)
>> {
>> struct cxl_memdev *cxlmd =
>> diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
>> index 420e4be85a1f..ff266e91ea71 100644
>> --- a/drivers/cxl/core/pci.c
>> +++ b/drivers/cxl/core/pci.c
>> @@ -1,5 +1,6 @@
>> // SPDX-License-Identifier: GPL-2.0-only
>> /* Copyright(c) 2021 Intel Corporation. All rights reserved. */
>> +#include <cxl/pci.h>
>> #include <linux/units.h>
>> #include <linux/io-64-nonatomic-lo-hi.h>
>> #include <linux/device.h>
>> diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
>> index 4da07727ab9c..eb59019fe5f3 100644
>> --- a/drivers/cxl/cxlpci.h
>> +++ b/drivers/cxl/cxlpci.h
>> @@ -14,22 +14,6 @@
>> */
>> #define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
>>
>> -/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
>> -#define CXL_DVSEC_PCIE_DEVICE 0
>> -#define CXL_DVSEC_CAP_OFFSET 0xA
>> -#define CXL_DVSEC_MEM_CAPABLE BIT(2)
>> -#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
>> -#define CXL_DVSEC_CTRL_OFFSET 0xC
>> -#define CXL_DVSEC_MEM_ENABLE BIT(2)
>> -#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
>> -#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
>> -#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
>> -#define CXL_DVSEC_MEM_ACTIVE BIT(1)
>> -#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
>> -#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
>> -#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
>> -#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
>> -
>> #define CXL_DVSEC_RANGE_MAX 2
>>
>> /* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
>> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
>> index 188412d45e0d..0b910ef52db7 100644
>> --- a/drivers/cxl/pci.c
>> +++ b/drivers/cxl/pci.c
>> @@ -1,5 +1,7 @@
>> // SPDX-License-Identifier: GPL-2.0-only
>> /* Copyright(c) 2020 Intel Corporation. All rights reserved. */
>> +#include <cxl/cxl.h>
>> +#include <cxl/pci.h>
>> #include <linux/unaligned.h>
>> #include <linux/io-64-nonatomic-lo-hi.h>
>> #include <linux/moduleparam.h>
>> @@ -816,6 +818,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>> struct cxl_memdev *cxlmd;
>> int i, rc, pmu_count;
>> bool irq_avail;
>> + u16 dvsec;
>>
>> /*
>> * Double check the anonymous union trickery in struct cxl_regs
>> @@ -836,13 +839,15 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>> pci_set_drvdata(pdev, cxlds);
>>
>> cxlds->rcd = is_cxl_restricted(pdev);
>> - cxlds->serial = pci_get_dsn(pdev);
>> - cxlds->cxl_dvsec = pci_find_dvsec_capability(
>> - pdev, PCI_VENDOR_ID_CXL, CXL_DVSEC_PCIE_DEVICE);
>> - if (!cxlds->cxl_dvsec)
>> + cxl_set_serial(cxlds, pci_get_dsn(pdev));
>> + dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
>> + CXL_DVSEC_PCIE_DEVICE);
>> + if (!dvsec)
>> dev_warn(&pdev->dev,
>> "Device DVSEC not present, skip CXL.mem init\n");
>>
>> + cxl_set_dvsec(cxlds, dvsec);
>> +
>> rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_MEMDEV, &map);
>> if (rc)
>> return rc;
>> diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
>> new file mode 100644
>> index 000000000000..19e5d883557a
>> --- /dev/null
>> +++ b/include/cxl/cxl.h
>> @@ -0,0 +1,21 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* Copyright(c) 2024 Advanced Micro Devices, Inc. */
>> +
>> +#ifndef __CXL_H
>> +#define __CXL_H
>> +
>> +#include <linux/ioport.h>
>> +
>> +enum cxl_resource {
>> + CXL_RES_DPA,
>> + CXL_RES_RAM,
>> + CXL_RES_PMEM,
>> +};
>> +
>> +struct cxl_dev_state *cxl_accel_state_create(struct device *dev);
>> +
>> +void cxl_set_dvsec(struct cxl_dev_state *cxlds, u16 dvsec);
>> +void cxl_set_serial(struct cxl_dev_state *cxlds, u64 serial);
>> +int cxl_set_resource(struct cxl_dev_state *cxlds, struct resource res,
>> + enum cxl_resource);
>> +#endif
>> diff --git a/include/cxl/pci.h b/include/cxl/pci.h
>> new file mode 100644
>> index 000000000000..ad63560caa2c
>> --- /dev/null
>> +++ b/include/cxl/pci.h
>> @@ -0,0 +1,23 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
>> +
>> +#ifndef __CXL_ACCEL_PCI_H
>> +#define __CXL_ACCEL_PCI_H
>> +
>> +/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
>> +#define CXL_DVSEC_PCIE_DEVICE 0
>> +#define CXL_DVSEC_CAP_OFFSET 0xA
>> +#define CXL_DVSEC_MEM_CAPABLE BIT(2)
>> +#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
>> +#define CXL_DVSEC_CTRL_OFFSET 0xC
>> +#define CXL_DVSEC_MEM_ENABLE BIT(2)
>> +#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + ((i) * 0x10))
>> +#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + ((i) * 0x10))
>> +#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
>> +#define CXL_DVSEC_MEM_ACTIVE BIT(1)
>> +#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
>> +#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + ((i) * 0x10))
>> +#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + ((i) * 0x10))
>> +#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
>> +
>> +#endif
>> --
>> 2.17.1
>>
>>
next prev parent reply other threads:[~2024-11-22 9:27 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-18 16:44 [PATCH v5 00/27] cxl: add type2 device basic support alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 01/27] " alejandro.lucero-palau
2024-11-18 21:55 ` Dave Jiang
2024-11-20 13:40 ` Alejandro Lucero Palau
2024-11-20 23:07 ` Fan Ni
2024-11-22 4:35 ` Alison Schofield
2024-11-22 9:27 ` Alejandro Lucero Palau [this message]
2024-11-26 5:59 ` Alison Schofield
2024-11-26 16:38 ` Alejandro Lucero Palau
2024-11-22 20:43 ` Ben Cheatham
2024-11-27 9:00 ` Alejandro Lucero Palau
2024-11-27 9:07 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 02/27] sfc: add cxl support using new CXL API alejandro.lucero-palau
2024-11-22 20:43 ` Ben Cheatham
2024-11-27 9:15 ` Alejandro Lucero Palau
2024-11-26 18:08 ` Fan Ni
2024-11-27 9:17 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 03/27] cxl: add capabilities field to cxl_dev_state and cxl_port alejandro.lucero-palau
2024-11-18 22:52 ` Dave Jiang
2024-11-19 12:28 ` Alejandro Lucero Palau
2024-11-19 15:53 ` Dave Jiang
2024-11-20 13:41 ` Alejandro Lucero Palau
2024-11-22 20:44 ` Ben Cheatham
2024-11-18 16:44 ` [PATCH v5 04/27] cxl/pci: add check for validating capabilities alejandro.lucero-palau
2024-11-22 20:44 ` Ben Cheatham
2024-11-27 11:34 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 05/27] cxl: move pci generic code alejandro.lucero-palau
2024-11-18 22:57 ` Dave Jiang
2024-11-22 20:44 ` Ben Cheatham
2024-11-18 16:44 ` [PATCH v5 06/27] cxl: add function for type2 cxl regs setup alejandro.lucero-palau
2024-11-18 23:32 ` Dave Jiang
2024-11-21 22:34 ` Alison Schofield
2024-11-27 11:46 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 07/27] sfc: use cxl api for regs setup and checking alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 08/27] cxl: add functions for resource request/release by a driver alejandro.lucero-palau
2024-11-22 20:45 ` Ben Cheatham
2024-11-18 16:44 ` [PATCH v5 09/27] sfc: request cxl ram resource alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 10/27] cxl: harden resource_contains checks to handle zero size resources alejandro.lucero-palau
2024-11-19 18:00 ` Dave Jiang
2024-11-20 13:44 ` Alejandro Lucero Palau
2024-11-19 19:50 ` Zhi Wang
2024-11-20 13:45 ` Alejandro Lucero Palau
2024-11-21 7:13 ` Zhi Wang
2024-11-21 2:46 ` Alison Schofield
2024-11-21 9:22 ` Alejandro Lucero Palau
2024-11-21 21:00 ` Alison Schofield
2024-11-27 14:56 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 11/27] cxl: add function for setting media ready by a driver alejandro.lucero-palau
2024-11-19 18:12 ` Dave Jiang
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 15:07 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 12/27] sfc: set cxl media ready alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 13/27] cxl: prepare memdev creation for type2 alejandro.lucero-palau
2024-11-19 18:24 ` Dave Jiang
2024-11-19 20:06 ` Zhi Wang
2024-11-19 21:27 ` Dave Jiang
2024-11-20 13:57 ` Alejandro Lucero Palau
2024-11-20 17:15 ` Dave Jiang
2024-11-21 7:43 ` Zhi Wang
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 16:09 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 14/27] sfc: create type2 cxl memdev alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 15/27] cxl: define a driver interface for HPA free space enumeration alejandro.lucero-palau
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 16:32 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 16/27] sfc: obtain root decoder with enough HPA free space alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 17/27] cxl: define a driver interface for DPA allocation alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 18/27] sfc: get endpoint decoder alejandro.lucero-palau
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 16:47 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 19/27] cxl: make region type based on endpoint type alejandro.lucero-palau
2024-11-19 20:16 ` Zhi Wang
2024-11-21 16:16 ` Dave Jiang
2024-11-18 16:44 ` [PATCH v5 20/27] cxl/region: factor out interleave ways setup alejandro.lucero-palau
2024-11-19 20:20 ` Zhi Wang
2024-11-21 16:23 ` Dave Jiang
2024-11-18 16:44 ` [PATCH v5 21/27] cxl/region: factor out interleave granularity setup alejandro.lucero-palau
2024-11-19 20:23 ` Zhi Wang
2024-11-21 16:24 ` Dave Jiang
2024-11-18 16:44 ` [PATCH v5 22/27] cxl: allow region creation by type2 drivers alejandro.lucero-palau
2024-11-19 20:37 ` Zhi Wang
2024-11-20 13:51 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 23/27] sfc: create cxl region alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 24/27] cxl: add region flag for precluding a device memory to be used for dax alejandro.lucero-palau
2024-11-19 20:39 ` Zhi Wang
2024-11-20 13:55 ` Alejandro Lucero Palau
2024-11-22 20:46 ` Ben Cheatham
2024-11-27 16:59 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 25/27] sfc: specify avoid dax when cxl region is created alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 26/27] cxl: add function for obtaining params from a region alejandro.lucero-palau
2024-11-19 20:40 ` Zhi Wang
2024-11-21 2:56 ` Alison Schofield
2024-11-27 17:18 ` Alejandro Lucero Palau
2024-11-21 16:31 ` Dave Jiang
2024-11-27 17:12 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 27/27] sfc: support pio mapping based on cxl alejandro.lucero-palau
2024-11-21 3:33 ` [PATCH v5 00/27] cxl: add type2 device basic support Alison Schofield
2024-11-21 9:27 ` Alejandro Lucero Palau
2024-11-22 4:14 ` Alison Schofield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6c039777-3455-eacc-8d7a-a248f7437c95@amd.com \
--to=alucerop@amd.com \
--cc=alejandro.lucero-palau@amd.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=edward.cree@amd.com \
--cc=kuba@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=martin.habets@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox