* [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN
@ 2026-11-03 17:07 Alison Schofield
2026-11-03 17:07 ` [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position Alison Schofield
` (4 more replies)
0 siblings, 5 replies; 8+ messages in thread
From: Alison Schofield @ 2026-11-03 17:07 UTC (permalink / raw)
To: Davidlohr Bueso, Jonathan Cameron, Dave Jiang, Alison Schofield,
Vishal Verma, Ira Weiny, Li Ming, Richard Cheng
Cc: linux-cxl
Writing an endpoint decoder to a region targetN attribute that already
holds it returns -EBUSY, but leaves the partially populated region in an
inconsistent state. The targetN attribute still names the decoder, so the
failed write gives no indication that the region was damaged.
Filling the remaining target positions can then trigger a NULL pointer
dereference in cxl_region_setup_targets(). This can be reproduced through
sysfs:
echo $decoder > /sys/bus/cxl/devices/region0/target0
echo $decoder > /sys/bus/cxl/devices/region0/target0
echo $other_decoder > /sys/bus/cxl/devices/region0/target1
An existing check recognizes the repeated assignment but incorrectly allows
the attachment to proceed, damaging region state. Remove that check so the
repeated write is rejected without disturbing the existing attachment,
consistent with the documented targetN ABI.
Fixes: 9995576cef48 ("cxl/region: Move region-position validation to a helper")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
---
Note: cxl_region_perf_data_calculate() currently updates region performance
data before attachment validation completes. This is a pre-existing issue
that will be addressed separately.
Changes in v4:
- Drop the added useless check in cxl_region_attach() (Sashiko)
The pre-existing occupied position check already returns -EBUSY.
v3: https://lore.kernel.org/linux-cxl/3e5af9d6d59f8df52b9d21bcf1c7e78f06918f80.1793653629.git.alison.schofield@intel.com/
Changes in v3:
- Reject repeat writes with -EBUSY, consistent with the documented ABI
- Rebase on 7.4-rc1
v2: https://lore.kernel.org/linux-cxl/920d80735a449f93a1f17a8bca4c25e4b302cb42.1792989098.git.alison.schofield@intel.com/
Changes in v2:
- Preserve the successful no-op behavior for repeated writes (Jonathan)
- Correct the Fixes tag
v1: https://lore.kernel.org/linux-cxl/94e9157aac2e99df1251d733769d539b914fdefc.1790829690.git.alison.schofield@intel.com/
---
drivers/cxl/core/region.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index a048bd5c06cb..f42c6b6e3213 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -1764,9 +1764,6 @@ static int cxl_region_validate_position(struct cxl_region *cxlr,
return -ENXIO;
}
- if (p->targets[pos] == cxled)
- return 0;
-
if (p->targets[pos]) {
struct cxl_endpoint_decoder *cxled_target = p->targets[pos];
struct cxl_memdev *cxlmd_target = cxled_to_memdev(cxled_target);
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
--
2.37.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position
2026-11-03 17:07 [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Alison Schofield
@ 2026-11-03 17:07 ` Alison Schofield
2026-11-03 23:07 ` Dave Jiang
2026-11-03 21:27 ` [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Cheatham, Benjamin
` (3 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: Alison Schofield @ 2026-11-03 17:07 UTC (permalink / raw)
To: Davidlohr Bueso, Jonathan Cameron, Dave Jiang, Alison Schofield,
Vishal Verma, Ira Weiny, Li Ming, Richard Cheng
Cc: linux-cxl
The region targetN ABI documents that writing to an occupied position
returns EBUSY, but does not describe how to clear the position after
assigning the wrong endpoint decoder.
Document how to clear a position by writing an empty string, how clearing a
position decommits a committed region, and how the region can be committed
again after all positions are filled.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
---
Changes in v4:
- Minor wordsmithing in commit log
v3: https://lore.kernel.org/linux-cxl/e87248b8d13d3f07741243a45891365450c66881.1793653629.git.alison.schofield@intel.com/
Changes in v3:
- Restore the original entry text and append how to clear a position
v2: https://lore.kernel.org/linux-cxl/efa1a098550077dc3571796ba0102ddabe1e9b0d.1792989098.git.alison.schofield@intel.com/
Changes in v2:
- Say that writing the endpoint decoder already at a position succeeds
- Split the entry into paragraphs and drop the v1 error code reordering
v1: https://lore.kernel.org/linux-cxl/a007c751d88ee64c9d0b7bb3c69a486c42358b36.1790829690.git.alison.schofield@intel.com/
---
Documentation/ABI/testing/sysfs-bus-cxl | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index 7352dbd70bc7..3629c983f05c 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -568,6 +568,10 @@ Description:
not an endpoint decoder. Once all positions have been
successfully written a final validation for decode conflicts is
performed before activating the region.
+ To clear a position, for example to replace an endpoint
+ decoder, write an empty string (echo > targetX). Clearing
+ a position in a committed region also decommits the region.
+ It can be committed again after all positions are filled.
What: /sys/bus/cxl/devices/regionZ/commit
--
2.37.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN
2026-11-03 17:07 [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Alison Schofield
2026-11-03 17:07 ` [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position Alison Schofield
@ 2026-11-03 21:27 ` Cheatham, Benjamin
2026-11-03 23:06 ` Dave Jiang
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Cheatham, Benjamin @ 2026-11-03 21:27 UTC (permalink / raw)
To: Alison Schofield, Davidlohr Bueso, Jonathan Cameron, Dave Jiang,
Vishal Verma, Ira Weiny, Li Ming, Richard Cheng
Cc: linux-cxl
On 11/3/2026 11:07 AM, Alison Schofield wrote:
> Writing an endpoint decoder to a region targetN attribute that already
> holds it returns -EBUSY, but leaves the partially populated region in an
> inconsistent state. The targetN attribute still names the decoder, so the
> failed write gives no indication that the region was damaged.
>
> Filling the remaining target positions can then trigger a NULL pointer
> dereference in cxl_region_setup_targets(). This can be reproduced through
> sysfs:
>
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $other_decoder > /sys/bus/cxl/devices/region0/target1
>
> An existing check recognizes the repeated assignment but incorrectly allows
> the attachment to proceed, damaging region state. Remove that check so the
> repeated write is rejected without disturbing the existing attachment,
> consistent with the documented targetN ABI.
>
> Fixes: 9995576cef48 ("cxl/region: Move region-position validation to a helper")
> Signed-off-by: Alison Schofield <alison.schofield@intel.com>
> ---
I didn't see this before I hit send on v3, you can disregard the comments on this patch there.
I skipped the Sashiko review and basically commented the same thing (whoops), and you fixed that
in this version, so:
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Thanks,
Ben
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN
2026-11-03 17:07 [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Alison Schofield
2026-11-03 17:07 ` [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position Alison Schofield
2026-11-03 21:27 ` [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Cheatham, Benjamin
@ 2026-11-03 23:06 ` Dave Jiang
2026-11-11 19:47 ` Jonathan Cameron
2026-11-16 22:12 ` Dave Jiang
4 siblings, 0 replies; 8+ messages in thread
From: Dave Jiang @ 2026-11-03 23:06 UTC (permalink / raw)
To: Alison Schofield, Davidlohr Bueso, Jonathan Cameron, Vishal Verma,
Ira Weiny, Li Ming, Richard Cheng
Cc: linux-cxl
On 11/3/26 10:07 AM, Alison Schofield wrote:
> Writing an endpoint decoder to a region targetN attribute that already
> holds it returns -EBUSY, but leaves the partially populated region in an
> inconsistent state. The targetN attribute still names the decoder, so the
> failed write gives no indication that the region was damaged.
>
> Filling the remaining target positions can then trigger a NULL pointer
> dereference in cxl_region_setup_targets(). This can be reproduced through
> sysfs:
>
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $other_decoder > /sys/bus/cxl/devices/region0/target1
>
> An existing check recognizes the repeated assignment but incorrectly allows
> the attachment to proceed, damaging region state. Remove that check so the
> repeated write is rejected without disturbing the existing attachment,
> consistent with the documented targetN ABI.
>
> Fixes: 9995576cef48 ("cxl/region: Move region-position validation to a helper")
> Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
>
> Note: cxl_region_perf_data_calculate() currently updates region performance
> data before attachment validation completes. This is a pre-existing issue
> that will be addressed separately.
>
> Changes in v4:
> - Drop the added useless check in cxl_region_attach() (Sashiko)
> The pre-existing occupied position check already returns -EBUSY.
> v3: https://lore.kernel.org/linux-cxl/3e5af9d6d59f8df52b9d21bcf1c7e78f06918f80.1793653629.git.alison.schofield@intel.com/
>
> Changes in v3:
> - Reject repeat writes with -EBUSY, consistent with the documented ABI
> - Rebase on 7.4-rc1
> v2: https://lore.kernel.org/linux-cxl/920d80735a449f93a1f17a8bca4c25e4b302cb42.1792989098.git.alison.schofield@intel.com/
>
> Changes in v2:
> - Preserve the successful no-op behavior for repeated writes (Jonathan)
> - Correct the Fixes tag
> v1: https://lore.kernel.org/linux-cxl/94e9157aac2e99df1251d733769d539b914fdefc.1790829690.git.alison.schofield@intel.com/
> ---
> drivers/cxl/core/region.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index a048bd5c06cb..f42c6b6e3213 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -1764,9 +1764,6 @@ static int cxl_region_validate_position(struct cxl_region *cxlr,
> return -ENXIO;
> }
>
> - if (p->targets[pos] == cxled)
> - return 0;
> -
> if (p->targets[pos]) {
> struct cxl_endpoint_decoder *cxled_target = p->targets[pos];
> struct cxl_memdev *cxlmd_target = cxled_to_memdev(cxled_target);
>
> base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position
2026-11-03 17:07 ` [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position Alison Schofield
@ 2026-11-03 23:07 ` Dave Jiang
2026-11-04 3:19 ` Alison Schofield
0 siblings, 1 reply; 8+ messages in thread
From: Dave Jiang @ 2026-11-03 23:07 UTC (permalink / raw)
To: Alison Schofield, Davidlohr Bueso, Jonathan Cameron, Vishal Verma,
Ira Weiny, Li Ming, Richard Cheng
Cc: linux-cxl
On 11/3/26 10:07 AM, Alison Schofield wrote:
> The region targetN ABI documents that writing to an occupied position
> returns EBUSY, but does not describe how to clear the position after
> assigning the wrong endpoint decoder.
>
> Document how to clear a position by writing an empty string, how clearing a
> position decommits a committed region, and how the region can be committed
> again after all positions are filled.
>
> Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
this change for the most part is unrelated to 1/2 right?
> ---
>
> Changes in v4:
> - Minor wordsmithing in commit log
> v3: https://lore.kernel.org/linux-cxl/e87248b8d13d3f07741243a45891365450c66881.1793653629.git.alison.schofield@intel.com/
>
> Changes in v3:
> - Restore the original entry text and append how to clear a position
> v2: https://lore.kernel.org/linux-cxl/efa1a098550077dc3571796ba0102ddabe1e9b0d.1792989098.git.alison.schofield@intel.com/
>
> Changes in v2:
> - Say that writing the endpoint decoder already at a position succeeds
> - Split the entry into paragraphs and drop the v1 error code reordering
> v1: https://lore.kernel.org/linux-cxl/a007c751d88ee64c9d0b7bb3c69a486c42358b36.1790829690.git.alison.schofield@intel.com/
> ---
> Documentation/ABI/testing/sysfs-bus-cxl | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
> index 7352dbd70bc7..3629c983f05c 100644
> --- a/Documentation/ABI/testing/sysfs-bus-cxl
> +++ b/Documentation/ABI/testing/sysfs-bus-cxl
> @@ -568,6 +568,10 @@ Description:
> not an endpoint decoder. Once all positions have been
> successfully written a final validation for decode conflicts is
> performed before activating the region.
> + To clear a position, for example to replace an endpoint
> + decoder, write an empty string (echo > targetX). Clearing
> + a position in a committed region also decommits the region.
> + It can be committed again after all positions are filled.
>
>
> What: /sys/bus/cxl/devices/regionZ/commit
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position
2026-11-03 23:07 ` Dave Jiang
@ 2026-11-04 3:19 ` Alison Schofield
0 siblings, 0 replies; 8+ messages in thread
From: Alison Schofield @ 2026-11-04 3:19 UTC (permalink / raw)
To: Dave Jiang
Cc: Davidlohr Bueso, Jonathan Cameron, Vishal Verma, Ira Weiny,
Li Ming, Richard Cheng, linux-cxl
On Tue, Nov 03, 2026 at 04:07:38PM -0700, Dave Jiang wrote:
>
>
> On 11/3/26 10:07 AM, Alison Schofield wrote:
> > The region targetN ABI documents that writing to an occupied position
> > returns EBUSY, but does not describe how to clear the position after
> > assigning the wrong endpoint decoder.
> >
> > Document how to clear a position by writing an empty string, how clearing a
> > position decommits a committed region, and how the region can be committed
> > again after all positions are filled.
> >
> > Signed-off-by: Alison Schofield <alison.schofield@intel.com>
>
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>
>
> this change for the most part is unrelated to 1/2 right?
It is independent of 1/2, but related because both are about the same
sysfs attribute.
With Patch 1 we've upheld the original ABI that writing to a position that
is already occupied returns -EBUSY. It doesn't matter if you are writing
the same decoder or a different one, if pos is occupied, you get -EBUSY!
So, with that, the user might ask, how do I make a change to a position?
This patch gives them the directions. It always worked but just was
never documented.
-- Alison
>
> > ---
> >
> > Changes in v4:
> > - Minor wordsmithing in commit log
> > v3: https://lore.kernel.org/linux-cxl/e87248b8d13d3f07741243a45891365450c66881.1793653629.git.alison.schofield@intel.com/
> >
> > Changes in v3:
> > - Restore the original entry text and append how to clear a position
> > v2: https://lore.kernel.org/linux-cxl/efa1a098550077dc3571796ba0102ddabe1e9b0d.1792989098.git.alison.schofield@intel.com/
> >
> > Changes in v2:
> > - Say that writing the endpoint decoder already at a position succeeds
> > - Split the entry into paragraphs and drop the v1 error code reordering
> > v1: https://lore.kernel.org/linux-cxl/a007c751d88ee64c9d0b7bb3c69a486c42358b36.1790829690.git.alison.schofield@intel.com/
> > ---
> > Documentation/ABI/testing/sysfs-bus-cxl | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
> > index 7352dbd70bc7..3629c983f05c 100644
> > --- a/Documentation/ABI/testing/sysfs-bus-cxl
> > +++ b/Documentation/ABI/testing/sysfs-bus-cxl
> > @@ -568,6 +568,10 @@ Description:
> > not an endpoint decoder. Once all positions have been
> > successfully written a final validation for decode conflicts is
> > performed before activating the region.
> > + To clear a position, for example to replace an endpoint
> > + decoder, write an empty string (echo > targetX). Clearing
> > + a position in a committed region also decommits the region.
> > + It can be committed again after all positions are filled.
> >
> >
> > What: /sys/bus/cxl/devices/regionZ/commit
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN
2026-11-03 17:07 [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Alison Schofield
` (2 preceding siblings ...)
2026-11-03 23:06 ` Dave Jiang
@ 2026-11-11 19:47 ` Jonathan Cameron
2026-11-16 22:12 ` Dave Jiang
4 siblings, 0 replies; 8+ messages in thread
From: Jonathan Cameron @ 2026-11-11 19:47 UTC (permalink / raw)
To: Alison Schofield
Cc: Davidlohr Bueso, Dave Jiang, Vishal Verma, Ira Weiny, Li Ming,
Richard Cheng, linux-cxl
On Tue, 3 Nov 2026 09:07:10 -0800
Alison Schofield <alison.schofield@intel.com> wrote:
> Writing an endpoint decoder to a region targetN attribute that already
> holds it returns -EBUSY, but leaves the partially populated region in an
> inconsistent state. The targetN attribute still names the decoder, so the
> failed write gives no indication that the region was damaged.
>
> Filling the remaining target positions can then trigger a NULL pointer
> dereference in cxl_region_setup_targets(). This can be reproduced through
> sysfs:
>
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $other_decoder > /sys/bus/cxl/devices/region0/target1
>
> An existing check recognizes the repeated assignment but incorrectly allows
> the attachment to proceed, damaging region state. Remove that check so the
> repeated write is rejected without disturbing the existing attachment,
> consistent with the documented targetN ABI.
>
> Fixes: 9995576cef48 ("cxl/region: Move region-position validation to a helper")
> Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN
2026-11-03 17:07 [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Alison Schofield
` (3 preceding siblings ...)
2026-11-11 19:47 ` Jonathan Cameron
@ 2026-11-16 22:12 ` Dave Jiang
4 siblings, 0 replies; 8+ messages in thread
From: Dave Jiang @ 2026-11-16 22:12 UTC (permalink / raw)
To: Alison Schofield, Davidlohr Bueso, Jonathan Cameron, Vishal Verma,
Ira Weiny, Li Ming, Richard Cheng
Cc: linux-cxl
On 11/3/26 10:07 AM, Alison Schofield wrote:
> Writing an endpoint decoder to a region targetN attribute that already
> holds it returns -EBUSY, but leaves the partially populated region in an
> inconsistent state. The targetN attribute still names the decoder, so the
> failed write gives no indication that the region was damaged.
>
> Filling the remaining target positions can then trigger a NULL pointer
> dereference in cxl_region_setup_targets(). This can be reproduced through
> sysfs:
>
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $decoder > /sys/bus/cxl/devices/region0/target0
> echo $other_decoder > /sys/bus/cxl/devices/region0/target1
>
> An existing check recognizes the repeated assignment but incorrectly allows
> the attachment to proceed, damaging region state. Remove that check so the
> repeated write is rejected without disturbing the existing attachment,
> consistent with the documented targetN ABI.
>
> Fixes: 9995576cef48 ("cxl/region: Move region-position validation to a helper")
> Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Applied to cxl/fixes (only this patch, not 2/2)
b8183f9259b5
> ---
>
> Note: cxl_region_perf_data_calculate() currently updates region performance
> data before attachment validation completes. This is a pre-existing issue
> that will be addressed separately.
>
> Changes in v4:
> - Drop the added useless check in cxl_region_attach() (Sashiko)
> The pre-existing occupied position check already returns -EBUSY.
> v3: https://lore.kernel.org/linux-cxl/3e5af9d6d59f8df52b9d21bcf1c7e78f06918f80.1793653629.git.alison.schofield@intel.com/
>
> Changes in v3:
> - Reject repeat writes with -EBUSY, consistent with the documented ABI
> - Rebase on 7.4-rc1
> v2: https://lore.kernel.org/linux-cxl/920d80735a449f93a1f17a8bca4c25e4b302cb42.1792989098.git.alison.schofield@intel.com/
>
> Changes in v2:
> - Preserve the successful no-op behavior for repeated writes (Jonathan)
> - Correct the Fixes tag
> v1: https://lore.kernel.org/linux-cxl/94e9157aac2e99df1251d733769d539b914fdefc.1790829690.git.alison.schofield@intel.com/
> ---
> drivers/cxl/core/region.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index a048bd5c06cb..f42c6b6e3213 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -1764,9 +1764,6 @@ static int cxl_region_validate_position(struct cxl_region *cxlr,
> return -ENXIO;
> }
>
> - if (p->targets[pos] == cxled)
> - return 0;
> -
> if (p->targets[pos]) {
> struct cxl_endpoint_decoder *cxled_target = p->targets[pos];
> struct cxl_memdev *cxlmd_target = cxled_to_memdev(cxled_target);
>
> base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2026-11-16 22:12 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-03 17:07 [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Alison Schofield
2026-11-03 17:07 ` [PATCH v4 2/2] cxl/Documentation: Describe clearing a region targetN position Alison Schofield
2026-11-03 23:07 ` Dave Jiang
2026-11-04 3:19 ` Alison Schofield
2026-11-03 21:27 ` [PATCH v4 1/2] cxl/region: Reject a repeat write of an endpoint decoder to targetN Cheatham, Benjamin
2026-11-03 23:06 ` Dave Jiang
2026-11-11 19:47 ` Jonathan Cameron
2026-11-16 22:12 ` Dave Jiang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox