Re: [PATCH 1/3] arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature

[Krishna Chaitanya Chundru <quic_krichai@quicinc.com>]

On 12/2/2024 8:36 PM, Manivannan Sadhasivam wrote:
> On Sun, Nov 17, 2024 at 03:30:18AM +0530, Krishna chaitanya chundru wrote:
>> Increase the configuration size to 256MB as required by the ECAM feature.
>> And also move config space, DBI, ELBI, IATU to upper PCIe region and use
>> lower PCIe region entierly for BAR region.
>>
> 
> Is this change compatible with old kernels before commit '10ba0854c5e6 ("PCI:
> qcom: Disable mirroring of DBI and iATU register space in BAR region")'?
> 
> - Mani
No mani, we need this commit '10ba0854c5e6 ("PCI:
 > qcom: Disable mirroring of DBI and iATU register space in BAR region")
for this.

- Krishna Chaitanya.
> 
>> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 12 ++++++------
>>   1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 3d8410683402..a7e3d3e9d034 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -2196,10 +2196,10 @@ wifi: wifi@17a10040 {
>>   		pcie1: pcie@1c08000 {
>>   			compatible = "qcom,pcie-sc7280";
>>   			reg = <0 0x01c08000 0 0x3000>,
>> -			      <0 0x40000000 0 0xf1d>,
>> -			      <0 0x40000f20 0 0xa8>,
>> -			      <0 0x40001000 0 0x1000>,
>> -			      <0 0x40100000 0 0x100000>;
>> +			      <4 0x00000000 0 0xf1d>,
>> +			      <4 0x00000f20 0 0xa8>,
>> +			      <4 0x10000000 0 0x1000>,
>> +			      <4 0x00000000 0 0x10000000>;
>>   
>>   			reg-names = "parf", "dbi", "elbi", "atu", "config";
>>   			device_type = "pci";
>> @@ -2210,8 +2210,8 @@ pcie1: pcie@1c08000 {
>>   			#address-cells = <3>;
>>   			#size-cells = <2>;
>>   
>> -			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
>> -				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
>> +			ranges = <0x01000000 0x0 0x00000000 0x0 0x40000000 0x0 0x100000>,
>> +				 <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>;
>>   
>>   			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
>>   				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
>>
>> -- 
>> 2.34.1
>>
>