Re: [PATCH v2] dt-bindings: usb: qcom,snps-dwc3: Fix glymur binding for non-MP controllers

[Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>]

On 9/2/2026 7:40 PM, Konrad Dybcio wrote:
> On 8/31/26 2:29 PM, Krzysztof Kozlowski wrote:
>> On 31/08/2026 11:03, Krishna Kurapati wrote:
>>>
>>>
>>> On 8/31/2026 2:07 PM, Krzysztof Kozlowski wrote:
>>>> On Fri, Aug 28, 2026 at 01:45:42PM +0530, Krishna Kurapati wrote:
>>>>> Currently for Glymur non-multiport USB controllers, number of interrupts
>>>>> are limited to a maximum of "5". Either hs_phy_irq or ss_phy_irq are to be
>>>>> present.
> 
> [...]
> 
>>>>>                  - qcom,eliza-dwc3
>>>>> +              - qcom,glymur-dwc3
>>>>>                  - qcom,ipq4019-dwc3
>>>>>                  - qcom,ipq8064-dwc3
>>>>>                  - qcom,kaanapali-dwc3
>>>>
>>>> This changes the ABI without an explanation.
>>>>
>>> As per the harware specification, the controllers do have both
>>> hs_phy_irq and ss_phy_irq. Hence wanted the binding to capture that
>>> info. Will update the commit message accordingly.
>>>
>>
>> So the change in 99df63d20dabda8d7ae01bcca7cdb1e92110a555 was
>> incomplete? Lack of context here is not helping.
>>
>> If they have these IRQs but it does not matter, then it is not a good
>> reason to change ABI and you should just add the clock as optional to
>> the end. Was this binding already released? I think yes.
> 
> IIUC the intent of the patch is to allow specifying the currently
> missing hs_phy_irq on non-multiport controllers (i.e. usb3_[012]).
> Bundling the DT change would have made that easier.
Yes, I wanted to add the missing hs_phy_irq. I didn't want to bundle in 
the DT along with the usb binding changes. DT change was posted separately:

https://lore.kernel.org/all/20260803-glymur-dt-usb-fixes-v1-1-0f5f52853102@oss.qualcomm.com/

Regards,
Krishna,