[PATCH] arm64: dts: qcom: Fix USB interrupts in Glymur DT

[PATCH] arm64: dts: qcom: Fix USB interrupts in Glymur DT

[Krishna Kurapati]

In Glymur, DRD capable USB Nodes are missing the HS Phy IRQ. Also, fix the
pwr_event and hs_phy interrupt numbers in Multiport coontroller node.

While at it, the dp and dm interrupt numbers have been swapped on HS only
usb controller. Fix them up.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
This series has only been compile tested.

Binding depedency:
https://lore.kernel.org/all/20260803-glymur-usb-binding-fixes-v1-1-9ce334777387@oss.qualcomm.com/
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index f04058d2e089..7a71297db481 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -4574,11 +4574,13 @@ usb_0: usb@a600000 {
 
 			interrupts-extended = <&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 90 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 60 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "dwc_usb3",
 					  "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -4649,11 +4651,13 @@ usb_1: usb@a800000 {
 
 			interrupts-extended = <&intc GIC_SPI 875 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 878 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 88 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 87 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 76 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "dwc_usb3",
 					  "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -4725,11 +4729,13 @@ usb_2: usb@a000000 {
 
 			interrupts-extended = <&intc GIC_SPI 871 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 877 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 89 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 81 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 75 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "dwc_usb3",
 					  "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -4805,14 +4811,14 @@ usb_hs: usb@a200000 {
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 92 IRQ_TYPE_EDGE_BOTH>,
+					      <&intc GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 57 IRQ_TYPE_EDGE_BOTH>,
-					      <&intc GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 92 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "dwc_usb3",
 					  "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq",
-					  "hs_phy_irq";
+					  "dm_hs_phy_irq";
 
 			resets = <&gcc GCC_USB20_PRIM_BCR>;
 
@@ -4870,10 +4876,10 @@ usb_mp: usb@a400000 {
 				      "noc_aggr_south";
 
 			interrupts-extended = <&intc GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 11 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,

---
base-commit: 1e88112e60de707020f3def45af81f9a0180ee82
change-id: 20260803-glymur-dt-usb-fixes-62f314d3f3a9

Best regards,
--  
Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>

Re: [PATCH] arm64: dts: qcom: Fix USB interrupts in Glymur DT

[Konrad Dybcio]

On 8/3/26 6:26 AM, Krishna Kurapati wrote:
> In Glymur, DRD capable USB Nodes are missing the HS Phy IRQ. Also, fix the
> pwr_event and hs_phy interrupt numbers in Multiport coontroller node.
> 
> While at it, the dp and dm interrupt numbers have been swapped on HS only
> usb controller. Fix them up.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---

Everything checks out with docs

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad