From: Clement Leger <clement.leger@linux.dev>
To: Prabhakar <prabhakar.csengg@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Simon Horman <horms@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Ralph Siemsen <ralph.siemsen@linaro.org>,
linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org,
Prabhakar <prabhakar.csengg+renesas@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH net-next v5 03/24] net: dsa: Kconfig: Expand config description to cover RZ/T2H and RZ/N2H ETHSW
Date: Fri, 20 Nov 2026 10:32:46 +0100 [thread overview]
Message-ID: <0ff0a7ec-b899-4668-a245-196ed1032548@linux.dev> (raw)
In-Reply-To: <20261120002549.1908299-4-prabhakar.mahadev-lad.rj@bp.renesas.com>
On 11/20/26 01:25, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Update the Kconfig entry for the RZN1 A5PSW tag driver to reflect that
> the same tagging format is also used by the ETHSW blocks found in Renesas
> RZ/T2H and RZ/N2H SoCs.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v4->v5:
> - No change
>
> v3->v4:
> - No change
>
> v2->v3:
> - No change
>
> v1->v2:
> - Updated description for Kconfig entry to cover RZ/T2H and RZ/N2H ETHSW
> ---
> net/dsa/Kconfig | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
> index bdeb60af764b..3c18314aee95 100644
> --- a/net/dsa/Kconfig
> +++ b/net/dsa/Kconfig
> @@ -199,11 +199,12 @@ config NET_DSA_TAG_RTL8_4
> switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC.
>
> config NET_DSA_TAG_RZN1_A5PSW
> - tristate "Tag driver for Renesas RZ/N1 A5PSW switch"
> + tristate "Tag driver for Renesas RZ/N1 A5PSW and RZ/T2H, RZ/N2H ETHSW"
> help
> - Say Y or M if you want to enable support for tagging frames for
> - Renesas RZ/N1 embedded switch that uses an 8 byte tag located after
> - destination MAC address.
> + Say Y or M if you want to enable frame tagging support for embedded
> + switches found on Renesas RZ/N1 (A5PSW) and RZ/T2H, RZ/N2H (ETHSW)
> + SoCs. These switches use an 8-byte tag located after the destination
> + MAC address.
Hi Prabhakar,
I would fold that in the commit that adds support for the RZ/T2H, RZ/N2
itself (ie patch 23: net: dsa: rzn1-a5psw: Add support for RZ/T2H
Ethernet switch)
Thanks,
Clément
>
> config NET_DSA_TAG_LAN9303
> tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
next prev parent reply other threads:[~2026-11-20 9:32 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 0:25 [PATCH net-next v5 00/24] Add ETHSW support for Renesas RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 01/24] net: dsa: tag_rzn1_a5psw: Drop redundant ETH_P_DSA_A5PSW definition Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 02/24] net: dsa: tag_rzn1_a5psw: Add RZ/T2H ETHSW tag protocol support Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 03/24] net: dsa: Kconfig: Expand config description to cover RZ/T2H and RZ/N2H ETHSW Prabhakar
2026-11-20 9:32 ` Clement Leger [this message]
2026-11-20 0:25 ` [PATCH net-next v5 04/24] net: pcs: rzn1-miic: Select ETHSW port speed through SWCTRL Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 05/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Reject the "ports" node Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 06/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Limit port reg values Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 07/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Add RZ/T2H and RZ/N2H ETHSW support Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 08/24] net: dsa: rzn1-a5psw: Fix LK_LEARNCOUNT write mode encoding Prabhakar
2026-11-20 3:27 ` Andrew Lunn
2026-11-20 6:01 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 09/24] net: dsa: rzn1-a5psw: Fix VLANTransmitted counter offset Prabhakar
2026-11-20 3:29 ` Andrew Lunn
2026-11-20 0:25 ` [PATCH net-next v5 10/24] net: dsa: rzn1-a5psw: Fix MDIO clock divider calculation Prabhakar
2026-11-20 6:51 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 11/24] net: dsa: rzn1-a5psw: Set driver data in probe Prabhakar
2026-11-20 6:53 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 12/24] net: dsa: rzn1-a5psw: Add support for optional reset control Prabhakar
2026-11-20 3:32 ` Andrew Lunn
2026-11-20 0:25 ` [PATCH net-next v5 13/24] net: dsa: rzn1-a5psw: Add support for optional timestamp clock Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 14/24] net: dsa: rzn1-a5psw: Make use dev_err_probe() Prabhakar
2026-11-20 6:58 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 15/24] net: dsa: rzn1-a5psw: Get switch info via OF data Prabhakar
2026-11-20 7:02 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 16/24] net: dsa: rzn1-a5psw: Choose tagging protocol based on compatible string Prabhakar
2026-11-20 7:03 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 17/24] net: dsa: rzn1-a5psw: Add fixed frame length workaround for management port Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 18/24] net: dsa: rzn1-a5psw: Get pattern matcher register offsets from OF data Prabhakar
2026-11-20 9:35 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 19/24] net: dsa: rzn1-a5psw: Get VLAN_RES field layout " Prabhakar
2026-11-20 9:37 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 20/24] net: dsa: rzn1-a5psw: Get lookup table size " Prabhakar
2026-11-20 9:44 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 21/24] net: dsa: rzn1-a5psw: Update CPU port comment for RZ/T2H Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 22/24] net: dsa: rzn1-a5psw: Keep MAC TX enabled on RZ/T2H Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 23/24] net: dsa: rzn1-a5psw: Add support for RZ/T2H Ethernet switch Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 24/24] net: dsa: Kconfig: Enable support for RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20 0:28 ` [PATCH net-next v5 00/24] Add ETHSW support for Renesas " netdev-bot+sinfo
2026-11-20 3:14 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0ff0a7ec-b899-4668-a245-196ed1032548@linux.dev \
--to=clement.leger@linux.dev \
--cc=andrew@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=prabhakar.csengg+renesas@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=ralph.siemsen@linaro.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox