From: Clement Leger <clement.leger@linux.dev>
To: Prabhakar <prabhakar.csengg@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Simon Horman <horms@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Ralph Siemsen <ralph.siemsen@linaro.org>,
linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org,
Prabhakar <prabhakar.csengg+renesas@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH net-next v5 18/24] net: dsa: rzn1-a5psw: Get pattern matcher register offsets from OF data
Date: Fri, 20 Nov 2026 10:35:27 +0100 [thread overview]
Message-ID: <30b4eece-f79c-4a8a-971b-e5566b96d878@linux.dev> (raw)
In-Reply-To: <20261120002549.1908299-19-prabhakar.mahadev-lad.rj@bp.renesas.com>
On 11/20/26 01:25, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> The RX pattern matcher registers are located at different offsets on
> RZ/N1 and RZ/T2H/RZ/N2H. While RZ/N1 uses 0x3e80 for RXMATCH_CONFIG
> and 0x3eb0 for PATTERN_CTRL, RZ/T2H and RZ/N2H use 0x3f00 and 0x3f40,
> respectively.
>
> Move the base offsets of both register arrays into struct a5psw_of_data
> and use the correct values for each SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v4->v5:
> - New patch
> ---
> drivers/net/dsa/rzn1_a5psw.c | 10 ++++++++--
> drivers/net/dsa/rzn1_a5psw.h | 8 ++++++--
> 2 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
> index 9475e53752ce..6f3f902f9f4c 100644
> --- a/drivers/net/dsa/rzn1_a5psw.c
> +++ b/drivers/net/dsa/rzn1_a5psw.c
> @@ -112,7 +112,9 @@ static void a5psw_port_pattern_set(struct a5psw *a5psw, int port, int pattern,
> if (enable)
> rx_match |= A5PSW_RXMATCH_CONFIG_PATTERN(pattern);
>
> - a5psw_reg_rmw(a5psw, A5PSW_RXMATCH_CONFIG(port),
> + a5psw_reg_rmw(a5psw,
> + A5PSW_RXMATCH_CONFIG(a5psw->of_data->rxmatch_config_base,
> + port),
> A5PSW_RXMATCH_CONFIG_PATTERN(pattern), rx_match);
> }
>
> @@ -953,7 +955,9 @@ static int a5psw_setup(struct dsa_switch *ds)
> a5psw_reg_writel(a5psw, A5PSW_MGMT_CFG, reg);
>
> /* Set pattern 0 to forward all frame to mgmt port */
> - a5psw_reg_writel(a5psw, A5PSW_PATTERN_CTRL(A5PSW_PATTERN_MGMTFWD),
> + a5psw_reg_writel(a5psw,
> + A5PSW_PATTERN_CTRL(a5psw->of_data->pattern_ctrl_base,
> + A5PSW_PATTERN_MGMTFWD),
> A5PSW_PATTERN_CTRL_MGMTFWD);
>
> /* Enable port tagging */
> @@ -1348,6 +1352,8 @@ static const struct a5psw_of_data rzn1_of_data = {
> .npcs = 4,
> .cpu_port = 4,
> .tag_proto = DSA_TAG_PROTO_RZN1_A5PSW,
> + .rxmatch_config_base = 0x3e80,
> + .pattern_ctrl_base = 0x3eb0,
> };
>
> static const struct of_device_id a5psw_of_mtable[] = {
> diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h
> index 942931cbc402..5c5f5ec25774 100644
> --- a/drivers/net/dsa/rzn1_a5psw.h
> +++ b/drivers/net/dsa/rzn1_a5psw.h
> @@ -74,10 +74,10 @@
> #define A5PSW_VLAN_RES_VLANID GENMASK(16, 5)
> #define A5PSW_VLAN_RES_PORTMASK GENMASK(4, 0)
>
> -#define A5PSW_RXMATCH_CONFIG(port) (0x3e80 + 4 * (port))
> +#define A5PSW_RXMATCH_CONFIG(base, port) ((base) + 4 * (port))
> #define A5PSW_RXMATCH_CONFIG_PATTERN(p) BIT(p)
>
> -#define A5PSW_PATTERN_CTRL(p) (0x3eb0 + 4 * (p))
> +#define A5PSW_PATTERN_CTRL(base, p) ((base) + 4 * (p))
> #define A5PSW_PATTERN_CTRL_MGMTFWD BIT(1)
>
> #define A5PSW_LK_CTRL 0x400
> @@ -239,6 +239,8 @@ union lk_data {
> * @tag_proto: DSA tag protocol used by the switch
> * @management_port_fixed_frame_len: Fixed frame length for the management
> * port to account for the HW issue.
> + * @rxmatch_config_base: Offset of the RXMATCH_CONFIG register of port 0
> + * @pattern_ctrl_base: Offset of the PATTERN_CTRL register of pattern 0
> */
> struct a5psw_of_data {
> unsigned int nports;
> @@ -246,6 +248,8 @@ struct a5psw_of_data {
> unsigned int cpu_port;
> enum dsa_tag_protocol tag_proto;
> unsigned int management_port_fixed_frame_len;
> + u16 rxmatch_config_base;
> + u16 pattern_ctrl_base;
> };
>
> /**
Reviewed-by: Clément Léger <clement.leger@linux.dev>
Thanks,
Clément
next prev parent reply other threads:[~2026-11-20 9:35 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 0:25 [PATCH net-next v5 00/24] Add ETHSW support for Renesas RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 01/24] net: dsa: tag_rzn1_a5psw: Drop redundant ETH_P_DSA_A5PSW definition Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 02/24] net: dsa: tag_rzn1_a5psw: Add RZ/T2H ETHSW tag protocol support Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 03/24] net: dsa: Kconfig: Expand config description to cover RZ/T2H and RZ/N2H ETHSW Prabhakar
2026-11-20 9:32 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 04/24] net: pcs: rzn1-miic: Select ETHSW port speed through SWCTRL Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 05/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Reject the "ports" node Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 06/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Limit port reg values Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 07/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Add RZ/T2H and RZ/N2H ETHSW support Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 08/24] net: dsa: rzn1-a5psw: Fix LK_LEARNCOUNT write mode encoding Prabhakar
2026-11-20 3:27 ` Andrew Lunn
2026-11-20 6:01 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 09/24] net: dsa: rzn1-a5psw: Fix VLANTransmitted counter offset Prabhakar
2026-11-20 3:29 ` Andrew Lunn
2026-11-20 0:25 ` [PATCH net-next v5 10/24] net: dsa: rzn1-a5psw: Fix MDIO clock divider calculation Prabhakar
2026-11-20 6:51 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 11/24] net: dsa: rzn1-a5psw: Set driver data in probe Prabhakar
2026-11-20 6:53 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 12/24] net: dsa: rzn1-a5psw: Add support for optional reset control Prabhakar
2026-11-20 3:32 ` Andrew Lunn
2026-11-20 0:25 ` [PATCH net-next v5 13/24] net: dsa: rzn1-a5psw: Add support for optional timestamp clock Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 14/24] net: dsa: rzn1-a5psw: Make use dev_err_probe() Prabhakar
2026-11-20 6:58 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 15/24] net: dsa: rzn1-a5psw: Get switch info via OF data Prabhakar
2026-11-20 7:02 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 16/24] net: dsa: rzn1-a5psw: Choose tagging protocol based on compatible string Prabhakar
2026-11-20 7:03 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 17/24] net: dsa: rzn1-a5psw: Add fixed frame length workaround for management port Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 18/24] net: dsa: rzn1-a5psw: Get pattern matcher register offsets from OF data Prabhakar
2026-11-20 9:35 ` Clement Leger [this message]
2026-11-20 0:25 ` [PATCH net-next v5 19/24] net: dsa: rzn1-a5psw: Get VLAN_RES field layout " Prabhakar
2026-11-20 9:37 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 20/24] net: dsa: rzn1-a5psw: Get lookup table size " Prabhakar
2026-11-20 9:44 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 21/24] net: dsa: rzn1-a5psw: Update CPU port comment for RZ/T2H Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 22/24] net: dsa: rzn1-a5psw: Keep MAC TX enabled on RZ/T2H Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 23/24] net: dsa: rzn1-a5psw: Add support for RZ/T2H Ethernet switch Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 24/24] net: dsa: Kconfig: Enable support for RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20 0:28 ` [PATCH net-next v5 00/24] Add ETHSW support for Renesas " netdev-bot+sinfo
2026-11-20 3:14 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30b4eece-f79c-4a8a-971b-e5566b96d878@linux.dev \
--to=clement.leger@linux.dev \
--cc=andrew@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=prabhakar.csengg+renesas@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=ralph.siemsen@linaro.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox