[RFC PATCH 0/3] *** Add device tree support for ARM to U-Boot ***

[RFC PATCH 0/3] *** Add device tree support for ARM to U-Boot ***

[John Rigby]

These patches add device tree support to the bootm command in u-boot
for the ARM.  I'm sending the patches to this list first for comments
before sending it to the wider audience on the u-boot list.

The only testing so far has shown that this patch does not break non-dt
booting.  I don't have a dt enabled beagle kernel so I have not tried that
yet.

John Rigby (3):
  FDT: Add fixup support of multiple banks of memory
  ARM: WIP: add flat device tree support
  ARM: add config for beagle with fdt enabled

 MAKEALL                           |    1 +
 arch/arm/include/asm/config.h     |    1 +
 arch/arm/lib/bootm.c              |  128 ++++++++++++++-
 boards.cfg                        |    1 +
 common/cmd_bootm.c                |    5 +-
 common/fdt_support.c              |   86 +++++-----
 common/image.c                    |    7 +-
 include/configs/omap3_beagle_dt.h |  344 +++++++++++++++++++++++++++++++++++++
 include/fdt_support.h             |    1 +
 include/image.h                   |    2 +-
 10 files changed, 531 insertions(+), 45 deletions(-)
 create mode 100644 include/configs/omap3_beagle_dt.h

[RFC PATCH 1/3] FDT: Add fixup support of multiple banks of memory

[John Rigby]

Add fdt_fixup_memory_banks and reimplement fdt_fixup_memory
to use it.

Signed-off-by: John Rigby <john.rigby-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 common/fdt_support.c  |   86 ++++++++++++++++++++++++++-----------------------
 include/fdt_support.h |    1 +
 2 files changed, 47 insertions(+), 40 deletions(-)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 718b635..73c95a8 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -362,10 +362,40 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
 	do_fixup_by_compat(fdt, compat, prop, &val, 4, create);
 }
 
-int fdt_fixup_memory(void *blob, u64 start, u64 size)
+/*
+ * Get cells len in bytes
+ *     if #NNNN-cells property is 2 then len is 8
+ *     otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+	const u32 *cell;
+
+	cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+	if (cell && *cell == 2)
+		return 8;
+
+	return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
 {
-	int err, nodeoffset, len = 0;
-	u8 tmp[16];
+	int shift = (size - 1) * 8;
+	while (size-- > 0) {
+		*addr++ = (val >> shift) & 0xff;
+		shift -= 8;
+	}
+}
+
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
+{
+	int err, nodeoffset;
+	int addr_cell_len, size_cell_len, len;
+	u8 tmp[banks * 8];
+	int bank;
 	const u32 *addrcell, *sizecell;
 
 	err = fdt_check_header(blob);
@@ -391,44 +421,15 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size)
 		return err;
 	}
 
-	addrcell = fdt_getprop(blob, 0, "#address-cells", NULL);
-	/* use shifts and mask to ensure endianness */
-	if ((addrcell) && (*addrcell == 2)) {
-		tmp[0] = (start >> 56) & 0xff;
-		tmp[1] = (start >> 48) & 0xff;
-		tmp[2] = (start >> 40) & 0xff;
-		tmp[3] = (start >> 32) & 0xff;
-		tmp[4] = (start >> 24) & 0xff;
-		tmp[5] = (start >> 16) & 0xff;
-		tmp[6] = (start >>  8) & 0xff;
-		tmp[7] = (start      ) & 0xff;
-		len = 8;
-	} else {
-		tmp[0] = (start >> 24) & 0xff;
-		tmp[1] = (start >> 16) & 0xff;
-		tmp[2] = (start >>  8) & 0xff;
-		tmp[3] = (start      ) & 0xff;
-		len = 4;
-	}
+	addr_cell_len = get_cells_len(blob, "#address-cells");
+	size_cell_len = get_cells_len(blob, "#size-cells");
 
-	sizecell = fdt_getprop(blob, 0, "#size-cells", NULL);
-	/* use shifts and mask to ensure endianness */
-	if ((sizecell) && (*sizecell == 2)) {
-		tmp[0+len] = (size >> 56) & 0xff;
-		tmp[1+len] = (size >> 48) & 0xff;
-		tmp[2+len] = (size >> 40) & 0xff;
-		tmp[3+len] = (size >> 32) & 0xff;
-		tmp[4+len] = (size >> 24) & 0xff;
-		tmp[5+len] = (size >> 16) & 0xff;
-		tmp[6+len] = (size >>  8) & 0xff;
-		tmp[7+len] = (size      ) & 0xff;
-		len += 8;
-	} else {
-		tmp[0+len] = (size >> 24) & 0xff;
-		tmp[1+len] = (size >> 16) & 0xff;
-		tmp[2+len] = (size >>  8) & 0xff;
-		tmp[3+len] = (size      ) & 0xff;
-		len += 4;
+	for (bank = 0, len = 0; bank < banks; bank++) {
+		write_cell(tmp + len, start, addr_cell_len);
+		len += addr_cell_len;
+
+		write_cell(tmp + len, start, size_cell_len);
+		len += size_cell_len;
 	}
 
 	err = fdt_setprop(blob, nodeoffset, "reg", tmp, len);
@@ -440,6 +441,11 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size)
 	return 0;
 }
 
+int fdt_fixup_memory(void *blob, u64 start, u64 size)
+{
+	return fdt_fixup_memory_banks(blob, &start, &size, 1);
+}
+
 void fdt_fixup_ethernet(void *fdt)
 {
 	int node, i, j;
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 54af9fe..76c731d 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -48,6 +48,7 @@ void do_fixup_by_compat(void *fdt, const char *compat,
 void do_fixup_by_compat_u32(void *fdt, const char *compat,
 			    const char *prop, u32 val, int create);
 int fdt_fixup_memory(void *blob, u64 start, u64 size);
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
 void fdt_fixup_ethernet(void *fdt);
 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
 			 const void *val, int len, int create);
-- 
1.7.0.4

[RFC PATCH 2/3] ARM: WIP: add flat device tree support

[John Rigby]

Signed-off-by: John Rigby <john.rigby-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/include/asm/config.h |    1 +
 arch/arm/lib/bootm.c          |  128 ++++++++++++++++++++++++++++++++++++++++-
 common/cmd_bootm.c            |    5 +-
 common/image.c                |    7 ++-
 include/image.h               |    2 +-
 5 files changed, 138 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index b76fd8e..9bca5bc 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -23,5 +23,6 @@
 
 /* Relocation to SDRAM works on all ARM boards */
 #define CONFIG_RELOC_FIXUP_WORKS
+#define CONFIG_LMB
 
 #endif
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 3101321..e45d974 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -27,6 +27,12 @@
 #include <u-boot/zlib.h>
 #include <asm/byteorder.h>
 
+#if defined(CONFIG_OF_LIBFDT)
+#include <fdt.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
@@ -50,7 +56,34 @@ static void setup_end_tag (bd_t *bd);
 static struct tag *params;
 #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
 
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
+static ulong get_sp(void);
+#if defined(CONFIG_OF_LIBFDT)
+static int bootm_linux_fdt(bootm_headers_t *images);
+#endif
+
+void arch_lmb_reserve(struct lmb *lmb)
+{
+	ulong sp;
+
+	/*
+	 * Booting a (Linux) kernel image
+	 *
+	 * Allocate space for command line and board info - the
+	 * address should be as high as possible within the reach of
+	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
+	 * memory, which means far enough below the current stack
+	 * pointer.
+	 */
+	sp = get_sp();
+	debug("## Current stack ends at 0x%08lx ", sp);
+
+	/* adjust sp by 1K to be safe */
+	sp -= 1024;
+	lmb_reserve(lmb, sp,
+		    gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
+}
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
 	bd_t	*bd = gd->bd;
 	char	*s;
@@ -64,6 +97,11 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
 		return 1;
 
+#ifdef CONFIG_OF_LIBFDT
+	if (images->ft_len)
+		return bootm_linux_fdt(images);
+#endif
+
 	theKernel = (void (*)(int, int, uint))images->ep;
 
 	s = getenv ("machid");
@@ -99,7 +137,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	if (images->rd_start && images->rd_end)
 		setup_initrd_tag (bd, images->rd_start, images->rd_end);
 #endif
-	setup_end_tag (bd);
+	setup_end_tag(bd);
 #endif
 
 	/* we assume that the kernel is in place */
@@ -120,6 +158,84 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	return 1;
 }
 
+#if defined(CONFIG_OF_LIBFDT)
+static int fixup_memory_node(void *blob)
+{
+	bd_t	*bd = gd->bd;
+	int bank;
+	u64 start[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		start[bank] = bd->bi_dram[bank].start;
+		size[bank] = bd->bi_dram[bank].size;
+	}
+
+	return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
+}
+
+static int bootm_linux_fdt(bootm_headers_t *images)
+{
+	ulong rd_len;
+	bd_t *bd = gd->bd;
+	char *s;
+	int machid = bd->bi_arch_number;
+	void (*theKernel)(int zero, int dt_machid, void *dtblob);
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	char **of_flat_tree = &images->ft_addr;
+	ulong *initrd_start = &images->initrd_start;
+	ulong *initrd_end = &images->initrd_end;
+	struct lmb *lmb = &images->lmb;
+	int ret;
+
+	theKernel = (void (*)(int, int, void *))images->ep;
+
+	s = getenv("machid");
+	if (s) {
+		machid = simple_strtoul(s, NULL, 16);
+		printf("Using machid 0x%x from environment\n", machid);
+	}
+
+	show_boot_progress(15);
+
+	rd_len = images->rd_end - images->rd_start;
+	ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
+				initrd_start, initrd_end);
+	if (ret)
+		return ret;
+
+	ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size);
+	if (ret)
+		return ret;
+
+	debug("## Transferring control to Linux (at address %08lx) ...\n",
+	       (ulong) theKernel);
+
+	fdt_chosen(*of_flat_tree, 1);
+
+	fixup_memory_node(*of_flat_tree);
+
+	fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
+
+	/* we assume that the kernel is in place */
+	printf("\nStarting kernel ...\n\n");
+
+#ifdef CONFIG_USB_DEVICE
+	{
+		extern void udc_disconnect(void);
+		udc_disconnect();
+	}
+#endif
+
+	cleanup_before_linux();
+
+	theKernel(0, machid, *of_flat_tree);
+	/* does not return */
+
+	return 1;
+}
+#endif
 
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
@@ -239,4 +355,12 @@ static void setup_end_tag (bd_t *bd)
 	params->hdr.size = 0;
 }
 
+static ulong get_sp(void)
+{
+	ulong ret;
+
+	asm("mov %0, sp" : "=r"(ret) : );
+	return ret;
+}
+
 #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index adfa6cd..6519321 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -301,7 +301,10 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 		}
 
 #if defined(CONFIG_OF_LIBFDT)
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+#if defined(CONFIG_PPC) || \
+    defined(CONFIG_M68K) || \
+    defined(CONFIG_SPARC) || \
+    defined(CONFIG_ARM)
 		/* find flattened device tree */
 		ret = boot_get_fdt (flag, argc, argv, &images,
 				    &images.ft_addr, &images.ft_len);
diff --git a/common/image.c b/common/image.c
index 6d8833e..6da38aa 100644
--- a/common/image.c
+++ b/common/image.c
@@ -985,7 +985,10 @@ int boot_get_ramdisk (int argc, char * const argv[], bootm_headers_t *images,
 	return 0;
 }
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+#if defined(CONFIG_PPC) || \
+    defined(CONFIG_M68K) || \
+    defined(CONFIG_SPARC) || \
+    defined(CONFIG_ARM)
 /**
  * boot_ramdisk_high - relocate init ramdisk
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1206,9 +1209,11 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 	if (fdt_blob < (char *)bootmap_base)
 		relocate = 1;
 
+#ifdef CONFIG_SYS_BOOTMAPSZ
 	if ((fdt_blob + *of_size + CONFIG_SYS_FDT_PAD) >=
 			((char *)CONFIG_SYS_BOOTMAPSZ + bootmap_base))
 		relocate = 1;
+#endif
 
 	/* move flattend device tree if needed */
 	if (relocate) {
diff --git a/include/image.h b/include/image.h
index bcc08d1..8f06cdc 100644
--- a/include/image.h
+++ b/include/image.h
@@ -339,7 +339,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 		char **of_flat_tree, ulong *of_size);
 #endif
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_ARM)
 int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len,
 		  ulong *initrd_start, ulong *initrd_end);
 
-- 
1.7.0.4

[RFC PATCH 3/3] ARM: add config for beagle with fdt enabled

[John Rigby]

Just for testing ARM device tree support

Signed-off-by: John Rigby <john.rigby-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 MAKEALL                           |    1 +
 boards.cfg                        |    1 +
 include/configs/omap3_beagle_dt.h |  344 +++++++++++++++++++++++++++++++++++++
 3 files changed, 346 insertions(+), 0 deletions(-)
 create mode 100644 include/configs/omap3_beagle_dt.h

diff --git a/MAKEALL b/MAKEALL
index 2133559..86efd5c 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -653,6 +653,7 @@ LIST_ARMV7="		\
 	devkit8000		\
 	mx51evk			\
 	omap3_beagle		\
+	omap3_beagle_dt		\
 	omap3_overo		\
 	omap3_evm		\
 	omap3_pandora		\
diff --git a/boards.cfg b/boards.cfg
index b82f530..d67865b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -259,6 +259,7 @@ omap3_pandora	arm	armv7		pandora		-		omap3
 omap3_zoom1	arm	armv7		zoom1		logicpd		omap3
 omap3_zoom2	arm	armv7		zoom2		logicpd		omap3
 omap3_beagle	arm	armv7		beagle		ti		omap3
+omap3_beagle_dt	arm	armv7		beagle		ti		omap3
 omap3_evm	arm	armv7		evm		ti		omap3
 omap3_sdp3430	arm	armv7		sdp3430		ti		omap3
 omap4_panda	arm	armv7		panda		ti		omap4
diff --git a/include/configs/omap3_beagle_dt.h b/include/configs/omap3_beagle_dt.h
new file mode 100644
index 0000000..6bd3c7b
--- /dev/null
+++ b/include/configs/omap3_beagle_dt.h
@@ -0,0 +1,344 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2-l0cyMroinI0@public.gmane.org>
+ * Syed Mohammed Khasim <x0khasim-l0cyMroinI0@public.gmane.org>
+ *
+ * Configuration settings for the TI OMAP3530 Beagle board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_BEAGLE	1	/* working with BEAGLE */
+
+#define CONFIG_SDRC	/* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ				/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+						/* Sector */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3	/* UART3 on Beagle Rev 2 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_DOS_PARTITION		1
+
+/* DDR - I use Micron DDR */
+#define CONFIG_OMAP3_MICRON_DDR		1
+
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+#define CONFIG_TWL4030_USB		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"Beagle"
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define MTDIDS_DEFAULT			"nand0=nand"
+#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
+					"1920k(u-boot),128k(u-boot-env),"\
+					"4m(kernel),-(fs)"
+
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_NAND		/* NAND support			*/
+
+#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#undef CONFIG_CMD_IMI		/* iminfo			*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#undef CONFIG_CMD_NFS		/* NFS support			*/
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_I2C_MULTI_BUS		1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+#define CONFIG_TWL4030_LED		1
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST	1
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
+							/* to access nand */
+#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
+							/* to access nand at */
+							/* CS0 */
+#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
+							/* devices */
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV		"nand0"
+/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET	0x680000
+#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
+							/* partition */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY		10
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"usbtty=cdc_acm\0" \
+	"console=ttyS2,115200n8\0" \
+	"mpurate=500\0" \
+	"vram=12M\0" \
+	"dvimode=1024x768MR-16@60\0" \
+	"defaultdisplay=dvi\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"nandroot=/dev/mtdblock4 rw\0" \
+	"nandrootfstype=jffs2\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"mpurate=${mpurate} " \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"mpurate=${mpurate} " \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source ${loadaddr}\0" \
+	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${loadaddr} 280000 400000; " \
+		"bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmc init; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run nandboot; " \
+			"fi; " \
+		"fi; " \
+	"else run nandboot; fi"
+
+#define CONFIG_AUTO_COMPLETE		1
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"OMAP3 beagleboard.org # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
+								/* works on */
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
+							/* load address */
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
+						/* one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_SYS_FLASH_BASE		boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_NAND		1
+#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
+#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
+#define CONFIG_ENV_OFFSET		boot_flash_off
+#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
+
+/* Flash banks JFFS2 should use */
+#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
+					CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+/* use flash_info[2] */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+#ifndef __ASSEMBLY__
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#endif /* __CONFIG_H */
-- 
1.7.0.4