From: John Bonesio <bones-RkXMcIGFT/TR7s880joybQ@public.gmane.org>
To: Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
David Gibson
<david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>
Cc: devicetree-discuss
<devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
Subject: dts and dtsi files on which I tested the syntax for my recent patch set.
Date: Wed, 20 Oct 2010 15:22:17 -0700 [thread overview]
Message-ID: <1287613337.4535.1508.camel@riker> (raw)
[-- Attachment #1: Type: text/plain, Size: 164 bytes --]
Hi,
I have attached the two file I've used to test the new syntax from my
patch set. These might help get a feel for how the syntax and the
features work.
- John
[-- Attachment #2: media5200.dts --]
[-- Type: text/x-csrc, Size: 3002 bytes --]
/*
* Freescale Media5200 board Device Tree Source
*
* Copyright 2009 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
* Steven Cavanagh <scavanagh-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc5200b.dtsi"
/ {
model = "fsl,media5200";
compatible = "fsl,media5200";
aliases {
console = &psc6;
ethernet0 = ð0;
};
chosen {
linux,stdout-path = &psc6;
};
memory {
reg = <0x00000000 0x08000000>; // 128MB RAM
};
};
&powerpc {
timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
bus-frequency = <132000000>; // 132 MHz
clock-frequency = <396000000>; // 396 MHz
};
&soc {
bus-frequency = <132000000>;// 132 MHz
};
&usb {
reg = <0x1000 0x100>;
};
/remove-node/ &psc1;
/remove-node/ &psc2;
/remove-node/ &{soc/serial@2400}; /* an example of using a label rooted path */
/remove-node/ &{/soc5200@f0000000/serial@2600}; /* an example of using the path instead of the label */
/remove-node/ &psc5;
&psc6 {
cell-index = <5>;
port-number = <0>;
};
&{soc/serial@2c00} {
cell-index = <5>;
port-number = <0>;
};
&pci {
interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
0xc000 0 0 2 &media5200_fpga 0 3
0xc000 0 0 3 &media5200_fpga 0 4
0xc000 0 0 4 &media5200_fpga 0 5
0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
0xc800 0 0 2 &media5200_fpga 0 4
0xc800 0 0 3 &media5200_fpga 0 5
0xc800 0 0 4 &media5200_fpga 0 2
0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
0xd000 0 0 2 &media5200_fpga 0 5
0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
>;
interrupt-parent = <&mpc5200_pic>;
};
&localbus {
ranges = < 0 0 0xfc000000 0x02000000
1 0 0xfe000000 0x02000000
2 0 0xf0010000 0x00010000
3 0 0xf0020000 0x00010000 >;
flash@0,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
reg = <0 0x0 0x2000000>; // 32 MB
bank-width = <4>; // Width in bytes of the flash bank
device-width = <2>; // Two devices on each bank
#size-cells = /undef-prop/;
#address-cells = /undef-prop/;
};
flash@1,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
reg = <1 0 0x2000000>; // 32 MB
bank-width = <4>; // Width in bytes of the flash bank
device-width = <2>; // Two devices on each bank
};
media5200_fpga: fpga@2,0 {
compatible = "fsl,media5200-fpga";
interrupt-controller;
#interrupt-cells = <2>; // 0:bank 1:id; no type field
reg = <2 0 0x10000>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <0 0 3 // IRQ bank 0
1 1 3>; // IRQ bank 1
};
uart@3,0 {
compatible = "ti,tl16c752bpt";
reg = <3 0 0x10000>;
interrupt-parent = <&media5200_fpga>;
interrupts = <0 0 0 1>; // 2 irqs
};
};
[-- Attachment #3: mpc5200b.dtsi --]
[-- Type: text/x-csrc, Size: 7337 bytes --]
/*
* base MPC5200b Device Tree Source
*
* Copyright (C) 2010 SecretLab
* Grant Likely <grant-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
* John Bonesio <bones-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,mpc5200b";
compatible = "fsl,mpc5200b";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
my_undef_property = /undef-prop/;
cpus {
#address-cells = <1>;
#size-cells = <0>;
powerpc: PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x4000>; // L1, 16K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory: memory {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
soc: soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0 0xf0000000 0x0000c000>;
reg = <0xf0000000 0x00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
reg = <0x200 0x38>;
};
mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 17 0>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 18 0>;
reg = <0x980 0x80>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
};
usb: usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
};
dma-controller@1200 {
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
reg = <0x1f00 0x100>;
};
psc1: serial@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
psc2: serial@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
};
psc3: serial@2400 { // PSC3
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
psc4: serial@2600 { // PSC4
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2600 0x100>;
interrupts = <2 11 0>;
};
psc5: serial@2800 { // PSC5
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2800 0x100>;
interrupts = <2 12 0>;
};
psc6: serial@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
eth0: ethernet@3000 {
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ata@3a00 {
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
};
i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
pci: pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
// interrupt-map = need to add
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
localbus: localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfc000000 0x2000000>;
// 16-bit flash device at LocalPlus Bus CS0
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x2000000>;
bank-width = <2>;
device-width = <2>;
#size-cells = <1>;
#address-cells = <1>;
};
};
};
[-- Attachment #4: Type: text/plain, Size: 192 bytes --]
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
next reply other threads:[~2010-10-20 22:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-20 22:22 John Bonesio [this message]
2010-10-20 23:46 ` dts and dtsi files on which I tested the syntax for my recent patch set Grant Likely
[not found] ` <20101020234638.GB10250-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-10-21 2:08 ` John Bonesio
2010-10-21 3:14 ` David Gibson
2010-10-21 5:06 ` John Bonesio
2010-10-21 5:40 ` Grant Likely
[not found] ` <20101021054024.GB2252-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-10-21 5:53 ` David Gibson
2010-10-21 3:11 ` David Gibson
2010-10-25 3:20 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287613337.4535.1508.camel@riker \
--to=bones-rkxmcigft/tr7s880joybq@public.gmane.org \
--cc=david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox