* [PATCH v4 1/1] ARM: imx28: add basic dt support
@ 2012-03-31 13:26 Dong Aisheng
2012-04-01 1:39 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Dong Aisheng @ 2012-03-31 13:26 UTC (permalink / raw)
To: devicetree-discuss
Cc: s.hauer, rob.herring, grant.likely, marek.vasut, linux-arm-kernel,
kernel, shawn.guo
From: Dong Aisheng <dong.aisheng@linaro.org>
This patch includes basic dt support which can boot via nfs rootfs.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
---
ChangeLog v3->v4:
* update to use irq_domain_add_legacy
ChangeLog v2->v3:
* Some minor fixes suggested by Shawn Guo
ChangeLog v1->v2:
* Some fixes addressed Rob's review comments.
Remove using of OF_DEV_AUXDATA.
* Remove mac address from dts file
Currently we use the mac address got from uboot to work.
Will submit a p separate atch using prom_update_property to fix this
issue for driver based on suggestions from Grant and Lothar.
* rename mxs-dt.c to mach-mxs.c which is supposed to support mx23 dt
too in the future.
* add compatible string "fsl,imx28" per Sascha's suggestion
* add more devices in dtsi file
For those devices still not in use, set the state to "disabled"
by default.
---
Documentation/devicetree/bindings/arm/fsl.txt | 4 +
arch/arm/boot/dts/imx28-evk.dts | 34 +++
arch/arm/boot/dts/imx28.dtsi | 356 +++++++++++++++++++++++++
arch/arm/mach-mxs/Kconfig | 10 +
arch/arm/mach-mxs/Makefile | 1 +
arch/arm/mach-mxs/clock-mx28.c | 4 +
arch/arm/mach-mxs/devices/Kconfig | 1 -
arch/arm/mach-mxs/mach-mxs.c | 68 +++++
8 files changed, 477 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/imx28-evk.dts
create mode 100644 arch/arm/boot/dts/imx28.dtsi
create mode 100644 arch/arm/mach-mxs/mach-mxs.c
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index bfbc771..fecb580 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -1,6 +1,10 @@
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
+i.MX28 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx28-evk", "fsl,imx28";
+
i.MX51 Babbage Board
Required root node properties:
- compatible = "fsl,imx51-babbage", "fsl,imx51";
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
new file mode 100644
index 0000000..57703ec
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Freescale i.MX28 Evaluation Kit";
+ compatible = "fsl,imx28-evk", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ ahb@80080000 {
+ ethernet@800f0000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ ethernet@800f4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
new file mode 100644
index 0000000..d1f4f8c
--- /dev/null
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -0,0 +1,356 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ aliases {
+ serial0 = &duart;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ apb@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x80000>;
+ ranges;
+
+ apbh@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x3c900>;
+ ranges;
+
+ icoll: interrupt-controller@80000000 {
+ compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80000000 0x2000>;
+ };
+
+ hsadc@80002000 {
+ reg = <0x80002000 2000>;
+ interrupts = <13 87>;
+ status = "disabled";
+ };
+
+ dma-apbh@80004000 {
+ reg = <0x80004000 2000>;
+ status = "disabled";
+ };
+
+ perfmon@80006000 {
+ reg = <0x80006000 800>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ bch@8000a000 {
+ reg = <0x8000a000 2000>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ gpmi@8000c000 {
+ reg = <0x8000c000 2000>;
+ interrupts = <42 88>;
+ status = "disabled";
+ };
+
+ ssp@80010000 {
+ reg = <0x80010000 2000>;
+ interrupts = <96 82>;
+ status = "disabled";
+ };
+
+ ssp@80012000 {
+ reg = <0x80012000 2000>;
+ interrupts = <97 83>;
+ status = "disabled";
+ };
+
+ ssp@80014000 {
+ reg = <0x80014000 2000>;
+ interrupts = <98 84>;
+ status = "disabled";
+ };
+
+ ssp@80016000 {
+ reg = <0x80016000 2000>;
+ interrupts = <99 85>;
+ status = "disabled";
+ };
+
+ pinctrl@80018000 {
+ reg = <0x80018000 2000>;
+ status = "disabled";
+ };
+
+ digctl@8001c000 {
+ reg = <0x8001c000 2000>;
+ interrupts = <89>;
+ status = "disabled";
+ };
+
+ etm@80022000 {
+ reg = <0x80022000 2000>;
+ status = "disabled";
+ };
+
+ dma-apbx@80024000 {
+ reg = <0x80024000 2000>;
+ status = "disabled";
+ };
+
+ dcp@80028000 {
+ reg = <0x80028000 2000>;
+ interrupts = <52 53 54>;
+ status = "disabled";
+ };
+
+ pxp@8002a000 {
+ reg = <0x8002a000 2000>;
+ interrupts = <39>;
+ status = "disabled";
+ };
+
+ ocotp@8002c000 {
+ reg = <0x8002c000 2000>;
+ status = "disabled";
+ };
+
+ axi-ahb@8002e000 {
+ reg = <0x8002e000 2000>;
+ status = "disabled";
+ };
+
+ lcdif@80030000 {
+ reg = <0x80030000 2000>;
+ interrupts = <38 86>;
+ status = "disabled";
+ };
+
+ can@80032000 {
+ reg = <0x80032000 2000>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
+ can@80034000 {
+ reg = <0x80034000 2000>;
+ interrupts = <9>;
+ status = "disabled";
+ };
+
+ simdbg@8003c000 {
+ reg = <0x8003c000 200>;
+ status = "disabled";
+ };
+
+ simgpmisel@8003c200 {
+ reg = <0x8003c200 100>;
+ status = "disabled";
+ };
+
+ simsspsel@8003c300 {
+ reg = <0x8003c300 100>;
+ status = "disabled";
+ };
+
+ simmemsel@8003c400 {
+ reg = <0x8003c400 100>;
+ status = "disabled";
+ };
+
+ gpiomon@8003c500 {
+ reg = <0x8003c500 100>;
+ status = "disabled";
+ };
+
+ simenet@8003c700 {
+ reg = <0x8003c700 100>;
+ status = "disabled";
+ };
+
+ armjtag@8003c800 {
+ reg = <0x8003c800 100>;
+ status = "disabled";
+ };
+ };
+
+ apbx@80040000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80040000 0x40000>;
+ ranges;
+
+ clkctl@80040000 {
+ reg = <0x80040000 2000>;
+ status = "disabled";
+ };
+
+ saif@80042000 {
+ reg = <0x80042000 2000>;
+ interrupts = <59 80>;
+ status = "disabled";
+ };
+
+ power@80044000 {
+ reg = <0x80044000 2000>;
+ status = "disabled";
+ };
+
+ saif@80046000 {
+ reg = <0x80046000 2000>;
+ interrupts = <58 81>;
+ status = "disabled";
+ };
+
+ lradc@80050000 {
+ reg = <0x80050000 2000>;
+ status = "disabled";
+ };
+
+ spdif@80054000 {
+ reg = <0x80054000 2000>;
+ interrupts = <45 66>;
+ status = "disabled";
+ };
+
+ rtc@80056000 {
+ reg = <0x80056000 2000>;
+ interrupts = <28 29>;
+ status = "disabled";
+ };
+
+ i2c@80058000 {
+ reg = <0x80058000 2000>;
+ interrupts = <111 68>;
+ status = "disabled";
+ };
+
+ i2c@8005a000 {
+ reg = <0x8005a000 2000>;
+ interrupts = <110 69>;
+ status = "disabled";
+ };
+
+ pwm@80064000 {
+ reg = <0x80064000 2000>;
+ status = "disabled";
+ };
+
+ timrot@80068000 {
+ reg = <0x80068000 2000>;
+ status = "disabled";
+ };
+
+ serial@8006a000 {
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+ status = "disabled";
+ };
+
+ serial@8006c000 {
+ reg = <0x8006c000 0x2000>;
+ interrupts = <113 72 73>;
+ status = "disabled";
+ };
+
+ serial@8006e000 {
+ reg = <0x8006e000 0x2000>;
+ interrupts = <114 74 75>;
+ status = "disabled";
+ };
+
+ serial@80070000 {
+ reg = <0x80070000 0x2000>;
+ interrupts = <115 76 77>;
+ status = "disabled";
+ };
+
+ serial@80072000 {
+ reg = <0x80072000 0x2000>;
+ interrupts = <116 78 79>;
+ status = "disabled";
+ };
+
+ duart: serial@80074000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80074000 0x1000>;
+ interrupts = <47>;
+ };
+
+ usbphy@8007c000 {
+ reg = <0x8007c000 0x2000>;
+ status = "disabled";
+ };
+
+ usbphy@8007e000 {
+ reg = <0x8007e000 0x2000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80080000 0x80000>;
+ ranges;
+
+ usbctrl@80080000 {
+ reg = <0x80080000 0x10000>;
+ status = "disabled";
+ };
+
+ usbctrl@80090000 {
+ reg = <0x80090000 0x10000>;
+ status = "disabled";
+ };
+
+ dflpt@800c0000 {
+ reg = <0x800c0000 0x10000>;
+ status = "disabled";
+ };
+
+ ethernet@800f0000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f0000 0x4000>;
+ interrupts = <101>;
+ status = "disabled";
+ };
+
+ ethernet@800f4000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f4000 0x4000>;
+ interrupts = <102>;
+ status = "disabled";
+ };
+
+ switch@800f8000 {
+ reg = <0x800f8000 0x8000>;
+ status = "disabled";
+ };
+
+ };
+};
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index c57f996..09fe0fb 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -7,16 +7,26 @@ config MXS_OCOTP
config SOC_IMX23
bool
+ select ARM_AMBA
select CPU_ARM926T
select HAVE_PWM
config SOC_IMX28
bool
+ select ARM_AMBA
select CPU_ARM926T
select HAVE_PWM
comment "MXS platforms:"
+config MACH_MXS_DT
+ bool "Support MXS platforms from device tree"
+ select SOC_IMX28
+ select USE_OF
+ help
+ Include support for Freescale MXS platforms(i.MX23 and i.MX28)
+ using the device tree for discovery
+
config MACH_STMP378X_DEVB
bool "Support STMP378x_devb Platform"
select SOC_IMX23
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 908bf9a..8328c45 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
+obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 7aa7ff8..a8b8462 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -648,6 +648,10 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
_REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
_REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
+ /* for DT */
+ _REGISTER_CLOCK("80074000.serial", NULL, uart_clk)
+ _REGISTER_CLOCK("800f0000.ethernet", NULL, fec_clk)
+ _REGISTER_CLOCK("800f4000.ethernet", NULL, fec_clk)
};
static int clk_misc_init(void)
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index b8913df..19659de 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -1,6 +1,5 @@
config MXS_HAVE_AMBA_DUART
bool
- select ARM_AMBA
config MXS_HAVE_PLATFORM_AUART
bool
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
new file mode 100644
index 0000000..5c5cba2
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+static int __init mxs_icoll_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id mxs_irq_match[] __initconst = {
+ { .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static void __init mxs_dt_init_irq(void)
+{
+ icoll_init_irq();
+ of_irq_init(mxs_irq_match);
+}
+
+static void __init imx28_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer imx28_timer = {
+ .init = imx28_timer_init,
+};
+
+static void __init mxs_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+}
+
+static const char *imx28_dt_compat[] __initdata = {
+ "fsl,imx28-evk",
+ "fsl,imx28",
+ NULL,
+};
+
+DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
+ .map_io = mx28_map_io,
+ .init_irq = mxs_dt_init_irq,
+ .timer = &imx28_timer,
+ .init_machine = mxs_machine_init,
+ .dt_compat = imx28_dt_compat,
+ .restart = mxs_restart,
+MACHINE_END
--
1.7.0.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v4 1/1] ARM: imx28: add basic dt support
2012-03-31 13:26 [PATCH v4 1/1] ARM: imx28: add basic dt support Dong Aisheng
@ 2012-04-01 1:39 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2012-04-01 1:39 UTC (permalink / raw)
To: Dong Aisheng
Cc: devicetree-discuss, rob.herring, marek.vasut, kernel, s.hauer,
linux-arm-kernel
On Sat, Mar 31, 2012 at 09:26:57PM +0800, Dong Aisheng wrote:
> From: Dong Aisheng <dong.aisheng@linaro.org>
>
> This patch includes basic dt support which can boot via nfs rootfs.
>
> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
> ---
> ChangeLog v3->v4:
> * update to use irq_domain_add_legacy
> ChangeLog v2->v3:
> * Some minor fixes suggested by Shawn Guo
> ChangeLog v1->v2:
> * Some fixes addressed Rob's review comments.
> Remove using of OF_DEV_AUXDATA.
> * Remove mac address from dts file
> Currently we use the mac address got from uboot to work.
> Will submit a p separate atch using prom_update_property to fix this
> issue for driver based on suggestions from Grant and Lothar.
> * rename mxs-dt.c to mach-mxs.c which is supposed to support mx23 dt
> too in the future.
> * add compatible string "fsl,imx28" per Sascha's suggestion
> * add more devices in dtsi file
> For those devices still not in use, set the state to "disabled"
> by default.
> ---
> Documentation/devicetree/bindings/arm/fsl.txt | 4 +
> arch/arm/boot/dts/imx28-evk.dts | 34 +++
> arch/arm/boot/dts/imx28.dtsi | 356 +++++++++++++++++++++++++
> arch/arm/mach-mxs/Kconfig | 10 +
> arch/arm/mach-mxs/Makefile | 1 +
> arch/arm/mach-mxs/clock-mx28.c | 4 +
> arch/arm/mach-mxs/devices/Kconfig | 1 -
> arch/arm/mach-mxs/mach-mxs.c | 68 +++++
> 8 files changed, 477 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx28-evk.dts
> create mode 100644 arch/arm/boot/dts/imx28.dtsi
> create mode 100644 arch/arm/mach-mxs/mach-mxs.c
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
> index bfbc771..fecb580 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.txt
> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
> @@ -1,6 +1,10 @@
> Freescale i.MX Platforms Device Tree Bindings
> -----------------------------------------------
>
> +i.MX28 Evaluation Kit
> +Required root node properties:
> + - compatible = "fsl,imx28-evk", "fsl,imx28";
> +
> i.MX51 Babbage Board
> Required root node properties:
> - compatible = "fsl,imx51-babbage", "fsl,imx51";
> diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
> new file mode 100644
> index 0000000..57703ec
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx28-evk.dts
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "imx28.dtsi"
> +
> +/ {
> + model = "Freescale i.MX28 Evaluation Kit";
> + compatible = "fsl,imx28-evk", "fsl,imx28";
> +
> + memory {
> + reg = <0x40000000 0x08000000>;
> + };
> +
> + ahb@80080000 {
> + ethernet@800f0000 {
> + phy-mode = "rmii";
> + status = "okay";
> + };
> +
> + ethernet@800f4000 {
> + phy-mode = "rmii";
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> new file mode 100644
> index 0000000..d1f4f8c
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -0,0 +1,356 @@
> +/*
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + interrupt-parent = <&icoll>;
> +
> + aliases {
> + serial0 = &duart;
This is not really needed, since there is only one instance duart.
And it really should be reserved for auart, which gets 5 instances.
I removed it and applied the patch. Thanks.
Regards,
Shawn
> + };
> +
> + cpus {
> + cpu@0 {
> + compatible = "arm,arm926ejs";
> + };
> + };
> +
> + apb@80000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x80000000 0x80000>;
> + ranges;
> +
> + apbh@80000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x80000000 0x3c900>;
> + ranges;
> +
> + icoll: interrupt-controller@80000000 {
> + compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x80000000 0x2000>;
> + };
> +
> + hsadc@80002000 {
> + reg = <0x80002000 2000>;
> + interrupts = <13 87>;
> + status = "disabled";
> + };
> +
> + dma-apbh@80004000 {
> + reg = <0x80004000 2000>;
> + status = "disabled";
> + };
> +
> + perfmon@80006000 {
> + reg = <0x80006000 800>;
> + interrupts = <27>;
> + status = "disabled";
> + };
> +
> + bch@8000a000 {
> + reg = <0x8000a000 2000>;
> + interrupts = <41>;
> + status = "disabled";
> + };
> +
> + gpmi@8000c000 {
> + reg = <0x8000c000 2000>;
> + interrupts = <42 88>;
> + status = "disabled";
> + };
> +
> + ssp@80010000 {
> + reg = <0x80010000 2000>;
> + interrupts = <96 82>;
> + status = "disabled";
> + };
> +
> + ssp@80012000 {
> + reg = <0x80012000 2000>;
> + interrupts = <97 83>;
> + status = "disabled";
> + };
> +
> + ssp@80014000 {
> + reg = <0x80014000 2000>;
> + interrupts = <98 84>;
> + status = "disabled";
> + };
> +
> + ssp@80016000 {
> + reg = <0x80016000 2000>;
> + interrupts = <99 85>;
> + status = "disabled";
> + };
> +
> + pinctrl@80018000 {
> + reg = <0x80018000 2000>;
> + status = "disabled";
> + };
> +
> + digctl@8001c000 {
> + reg = <0x8001c000 2000>;
> + interrupts = <89>;
> + status = "disabled";
> + };
> +
> + etm@80022000 {
> + reg = <0x80022000 2000>;
> + status = "disabled";
> + };
> +
> + dma-apbx@80024000 {
> + reg = <0x80024000 2000>;
> + status = "disabled";
> + };
> +
> + dcp@80028000 {
> + reg = <0x80028000 2000>;
> + interrupts = <52 53 54>;
> + status = "disabled";
> + };
> +
> + pxp@8002a000 {
> + reg = <0x8002a000 2000>;
> + interrupts = <39>;
> + status = "disabled";
> + };
> +
> + ocotp@8002c000 {
> + reg = <0x8002c000 2000>;
> + status = "disabled";
> + };
> +
> + axi-ahb@8002e000 {
> + reg = <0x8002e000 2000>;
> + status = "disabled";
> + };
> +
> + lcdif@80030000 {
> + reg = <0x80030000 2000>;
> + interrupts = <38 86>;
> + status = "disabled";
> + };
> +
> + can@80032000 {
> + reg = <0x80032000 2000>;
> + interrupts = <8>;
> + status = "disabled";
> + };
> +
> + can@80034000 {
> + reg = <0x80034000 2000>;
> + interrupts = <9>;
> + status = "disabled";
> + };
> +
> + simdbg@8003c000 {
> + reg = <0x8003c000 200>;
> + status = "disabled";
> + };
> +
> + simgpmisel@8003c200 {
> + reg = <0x8003c200 100>;
> + status = "disabled";
> + };
> +
> + simsspsel@8003c300 {
> + reg = <0x8003c300 100>;
> + status = "disabled";
> + };
> +
> + simmemsel@8003c400 {
> + reg = <0x8003c400 100>;
> + status = "disabled";
> + };
> +
> + gpiomon@8003c500 {
> + reg = <0x8003c500 100>;
> + status = "disabled";
> + };
> +
> + simenet@8003c700 {
> + reg = <0x8003c700 100>;
> + status = "disabled";
> + };
> +
> + armjtag@8003c800 {
> + reg = <0x8003c800 100>;
> + status = "disabled";
> + };
> + };
> +
> + apbx@80040000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x80040000 0x40000>;
> + ranges;
> +
> + clkctl@80040000 {
> + reg = <0x80040000 2000>;
> + status = "disabled";
> + };
> +
> + saif@80042000 {
> + reg = <0x80042000 2000>;
> + interrupts = <59 80>;
> + status = "disabled";
> + };
> +
> + power@80044000 {
> + reg = <0x80044000 2000>;
> + status = "disabled";
> + };
> +
> + saif@80046000 {
> + reg = <0x80046000 2000>;
> + interrupts = <58 81>;
> + status = "disabled";
> + };
> +
> + lradc@80050000 {
> + reg = <0x80050000 2000>;
> + status = "disabled";
> + };
> +
> + spdif@80054000 {
> + reg = <0x80054000 2000>;
> + interrupts = <45 66>;
> + status = "disabled";
> + };
> +
> + rtc@80056000 {
> + reg = <0x80056000 2000>;
> + interrupts = <28 29>;
> + status = "disabled";
> + };
> +
> + i2c@80058000 {
> + reg = <0x80058000 2000>;
> + interrupts = <111 68>;
> + status = "disabled";
> + };
> +
> + i2c@8005a000 {
> + reg = <0x8005a000 2000>;
> + interrupts = <110 69>;
> + status = "disabled";
> + };
> +
> + pwm@80064000 {
> + reg = <0x80064000 2000>;
> + status = "disabled";
> + };
> +
> + timrot@80068000 {
> + reg = <0x80068000 2000>;
> + status = "disabled";
> + };
> +
> + serial@8006a000 {
> + reg = <0x8006a000 0x2000>;
> + interrupts = <112 70 71>;
> + status = "disabled";
> + };
> +
> + serial@8006c000 {
> + reg = <0x8006c000 0x2000>;
> + interrupts = <113 72 73>;
> + status = "disabled";
> + };
> +
> + serial@8006e000 {
> + reg = <0x8006e000 0x2000>;
> + interrupts = <114 74 75>;
> + status = "disabled";
> + };
> +
> + serial@80070000 {
> + reg = <0x80070000 0x2000>;
> + interrupts = <115 76 77>;
> + status = "disabled";
> + };
> +
> + serial@80072000 {
> + reg = <0x80072000 0x2000>;
> + interrupts = <116 78 79>;
> + status = "disabled";
> + };
> +
> + duart: serial@80074000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x80074000 0x1000>;
> + interrupts = <47>;
> + };
> +
> + usbphy@8007c000 {
> + reg = <0x8007c000 0x2000>;
> + status = "disabled";
> + };
> +
> + usbphy@8007e000 {
> + reg = <0x8007e000 0x2000>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + ahb@80080000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x80080000 0x80000>;
> + ranges;
> +
> + usbctrl@80080000 {
> + reg = <0x80080000 0x10000>;
> + status = "disabled";
> + };
> +
> + usbctrl@80090000 {
> + reg = <0x80090000 0x10000>;
> + status = "disabled";
> + };
> +
> + dflpt@800c0000 {
> + reg = <0x800c0000 0x10000>;
> + status = "disabled";
> + };
> +
> + ethernet@800f0000 {
> + compatible = "fsl,imx28-fec";
> + reg = <0x800f0000 0x4000>;
> + interrupts = <101>;
> + status = "disabled";
> + };
> +
> + ethernet@800f4000 {
> + compatible = "fsl,imx28-fec";
> + reg = <0x800f4000 0x4000>;
> + interrupts = <102>;
> + status = "disabled";
> + };
> +
> + switch@800f8000 {
> + reg = <0x800f8000 0x8000>;
> + status = "disabled";
> + };
> +
> + };
> +};
> diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
> index c57f996..09fe0fb 100644
> --- a/arch/arm/mach-mxs/Kconfig
> +++ b/arch/arm/mach-mxs/Kconfig
> @@ -7,16 +7,26 @@ config MXS_OCOTP
>
> config SOC_IMX23
> bool
> + select ARM_AMBA
> select CPU_ARM926T
> select HAVE_PWM
>
> config SOC_IMX28
> bool
> + select ARM_AMBA
> select CPU_ARM926T
> select HAVE_PWM
>
> comment "MXS platforms:"
>
> +config MACH_MXS_DT
> + bool "Support MXS platforms from device tree"
> + select SOC_IMX28
> + select USE_OF
> + help
> + Include support for Freescale MXS platforms(i.MX23 and i.MX28)
> + using the device tree for discovery
> +
> config MACH_STMP378X_DEVB
> bool "Support STMP378x_devb Platform"
> select SOC_IMX23
> diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
> index 908bf9a..8328c45 100644
> --- a/arch/arm/mach-mxs/Makefile
> +++ b/arch/arm/mach-mxs/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o
> obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
> obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
>
> +obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
> obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
> obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
> obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
> diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
> index 7aa7ff8..a8b8462 100644
> --- a/arch/arm/mach-mxs/clock-mx28.c
> +++ b/arch/arm/mach-mxs/clock-mx28.c
> @@ -648,6 +648,10 @@ static struct clk_lookup lookups[] = {
> _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
> _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
> _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
> + /* for DT */
> + _REGISTER_CLOCK("80074000.serial", NULL, uart_clk)
> + _REGISTER_CLOCK("800f0000.ethernet", NULL, fec_clk)
> + _REGISTER_CLOCK("800f4000.ethernet", NULL, fec_clk)
> };
>
> static int clk_misc_init(void)
> diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
> index b8913df..19659de 100644
> --- a/arch/arm/mach-mxs/devices/Kconfig
> +++ b/arch/arm/mach-mxs/devices/Kconfig
> @@ -1,6 +1,5 @@
> config MXS_HAVE_AMBA_DUART
> bool
> - select ARM_AMBA
>
> config MXS_HAVE_PLATFORM_AUART
> bool
> diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
> new file mode 100644
> index 0000000..5c5cba2
> --- /dev/null
> +++ b/arch/arm/mach-mxs/mach-mxs.c
> @@ -0,0 +1,68 @@
> +/*
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2012 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/init.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +#include <mach/common.h>
> +
> +static int __init mxs_icoll_add_irq_domain(struct device_node *np,
> + struct device_node *interrupt_parent)
> +{
> + irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mxs_irq_match[] __initconst = {
> + { .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, },
> + { /* sentinel */ }
> +};
> +
> +static void __init mxs_dt_init_irq(void)
> +{
> + icoll_init_irq();
> + of_irq_init(mxs_irq_match);
> +}
> +
> +static void __init imx28_timer_init(void)
> +{
> + mx28_clocks_init();
> +}
> +
> +static struct sys_timer imx28_timer = {
> + .init = imx28_timer_init,
> +};
> +
> +static void __init mxs_machine_init(void)
> +{
> + of_platform_populate(NULL, of_default_bus_match_table,
> + NULL, NULL);
> +}
> +
> +static const char *imx28_dt_compat[] __initdata = {
> + "fsl,imx28-evk",
> + "fsl,imx28",
> + NULL,
> +};
> +
> +DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
> + .map_io = mx28_map_io,
> + .init_irq = mxs_dt_init_irq,
> + .timer = &imx28_timer,
> + .init_machine = mxs_machine_init,
> + .dt_compat = imx28_dt_compat,
> + .restart = mxs_restart,
> +MACHINE_END
> --
> 1.7.0.4
>
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-04-01 1:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-31 13:26 [PATCH v4 1/1] ARM: imx28: add basic dt support Dong Aisheng
2012-04-01 1:39 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox