[PATCH v6 1/6] spmi: Linux driver framework for SPMI

[PATCH v6 1/6] spmi: Linux driver framework for SPMI

[Josh Cartwright]

From: Kenneth Heitke <kheitke@codeaurora.org>

System Power Management Interface (SPMI) is a specification
developed by the MIPI (Mobile Industry Process Interface) Alliance
optimized for the real time control of Power Management ICs (PMIC).

SPMI is a two-wire serial interface that supports up to 4 master
devices and up to 16 logical slaves.

The framework supports message APIs, multiple busses (1 controller
per bus) and multiple clients/slave devices per controller.

Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org>
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
---
 drivers/Kconfig                 |   2 +
 drivers/Makefile                |   1 +
 drivers/spmi/Kconfig            |   9 +
 drivers/spmi/Makefile           |   4 +
 drivers/spmi/spmi.c             | 609 ++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/spmi/spmi.h |  18 ++
 include/linux/mod_devicetable.h |   8 +
 include/linux/spmi.h            | 191 +++++++++++++
 8 files changed, 842 insertions(+)
 create mode 100644 drivers/spmi/Kconfig
 create mode 100644 drivers/spmi/Makefile
 create mode 100644 drivers/spmi/spmi.c
 create mode 100644 include/dt-bindings/spmi/spmi.h
 create mode 100644 include/linux/spmi.h

diff --git a/drivers/Kconfig b/drivers/Kconfig
index b3138fb..e0a4ae6 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -52,6 +52,8 @@ source "drivers/i2c/Kconfig"
 
 source "drivers/spi/Kconfig"
 
+source "drivers/spmi/Kconfig"
+
 source "drivers/hsi/Kconfig"
 
 source "drivers/pps/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 8e3b8b0..3d6de8b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_ATA)		+= ata/
 obj-$(CONFIG_TARGET_CORE)	+= target/
 obj-$(CONFIG_MTD)		+= mtd/
 obj-$(CONFIG_SPI)		+= spi/
+obj-$(CONFIG_SPMI)		+= spmi/
 obj-y				+= hsi/
 obj-y				+= net/
 obj-$(CONFIG_ATM)		+= atm/
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
new file mode 100644
index 0000000..1dbfee0
--- /dev/null
+++ b/drivers/spmi/Kconfig
@@ -0,0 +1,9 @@
+#
+# SPMI driver configuration
+#
+menuconfig SPMI
+	tristate "SPMI support"
+	help
+	  SPMI (System Power Management Interface) is a two-wire
+	  serial interface between baseband and application processors
+	  and Power Management Integrated Circuits (PMIC).
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
new file mode 100644
index 0000000..1de1acd
--- /dev/null
+++ b/drivers/spmi/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for kernel SPMI framework.
+#
+obj-$(CONFIG_SPMI)	+= spmi.o
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
new file mode 100644
index 0000000..6122c8f
--- /dev/null
+++ b/drivers/spmi/spmi.c
@@ -0,0 +1,609 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spmi.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include <dt-bindings/spmi/spmi.h>
+
+static DEFINE_IDA(ctrl_ida);
+
+static void spmi_dev_release(struct device *dev)
+{
+	struct spmi_device *sdev = to_spmi_device(dev);
+	kfree(sdev);
+}
+
+static const struct device_type spmi_dev_type = {
+	.release	= spmi_dev_release,
+};
+
+static void spmi_ctrl_release(struct device *dev)
+{
+	struct spmi_controller *ctrl = to_spmi_controller(dev);
+	ida_simple_remove(&ctrl_ida, ctrl->nr);
+	kfree(ctrl);
+}
+
+static const struct device_type spmi_ctrl_type = {
+	.release	= spmi_ctrl_release,
+};
+
+#ifdef CONFIG_PM_RUNTIME
+static int spmi_runtime_suspend(struct device *dev)
+{
+	struct spmi_device *sdev = to_spmi_device(dev);
+	int err;
+
+	err = pm_generic_runtime_suspend(dev);
+	if (err)
+		return err;
+
+	return spmi_command_sleep(sdev);
+}
+
+static int spmi_runtime_resume(struct device *dev)
+{
+	struct spmi_device *sdev = to_spmi_device(dev);
+	int err;
+
+	err = spmi_command_wakeup(sdev);
+	if (err)
+		return err;
+
+	return pm_generic_runtime_resume(dev);
+}
+#endif
+
+static const struct dev_pm_ops spmi_pm_ops = {
+	SET_RUNTIME_PM_OPS(
+		spmi_runtime_suspend,
+		spmi_runtime_resume,
+		NULL
+	)
+};
+
+static int spmi_device_match(struct device *dev, struct device_driver *drv)
+{
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
+	if (drv->name)
+		return strncmp(dev_name(dev), drv->name,
+			       SPMI_NAME_SIZE) == 0;
+
+	return 0;
+}
+
+/**
+ * spmi_device_add() - add a device previously constructed via spmi_device_alloc()
+ * @sdev:	spmi_device to be added
+ */
+int spmi_device_add(struct spmi_device *sdev)
+{
+	struct spmi_controller *ctrl = sdev->ctrl;
+	int err;
+
+	dev_set_name(&sdev->dev, "%d-%02x", ctrl->nr, sdev->usid);
+
+	err = device_add(&sdev->dev);
+	if (err < 0) {
+		dev_err(&sdev->dev, "Can't add %s, status %d\n",
+			dev_name(&sdev->dev), err);
+		goto err_device_add;
+	}
+
+	dev_dbg(&sdev->dev, "device %s registered\n", dev_name(&sdev->dev));
+
+err_device_add:
+	return err;
+}
+EXPORT_SYMBOL_GPL(spmi_device_add);
+
+/**
+ * spmi_device_remove(): remove an SPMI device
+ * @sdev:	spmi_device to be removed
+ */
+void spmi_device_remove(struct spmi_device *sdev)
+{
+	device_unregister(&sdev->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_device_remove);
+
+static inline int
+spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid)
+{
+	if (!ctrl || !ctrl->cmd || ctrl->dev.type != &spmi_ctrl_type)
+		return -EINVAL;
+
+	return ctrl->cmd(ctrl, opcode, sid);
+}
+
+static inline int spmi_read_cmd(struct spmi_controller *ctrl, u8 opcode,
+				u8 sid, u16 addr, u8 *buf, size_t len)
+{
+	if (!ctrl || !ctrl->read_cmd || ctrl->dev.type != &spmi_ctrl_type)
+		return -EINVAL;
+
+	return ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len);
+}
+
+static inline int spmi_write_cmd(struct spmi_controller *ctrl, u8 opcode,
+				 u8 sid, u16 addr, const u8 *buf, size_t len)
+{
+	if (!ctrl || !ctrl->write_cmd || ctrl->dev.type != &spmi_ctrl_type)
+		return -EINVAL;
+
+	return ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len);
+}
+
+/**
+ * spmi_register_read() - register read
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (5-bit address).
+ * @buf:	buffer to be populated with data from the Slave.
+ *
+ * Reads 1 byte of data from a Slave device register.
+ */
+int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf)
+{
+	/* 5-bit register address */
+	if (addr > 0x1F)
+		return -EINVAL;
+
+	return spmi_read_cmd(sdev->ctrl, SPMI_CMD_READ, sdev->usid, addr,
+			     buf, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_read);
+
+/**
+ * spmi_ext_register_read() - extended register read
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (8-bit address).
+ * @buf:	buffer to be populated with data from the Slave.
+ * @len:	the request number of bytes to read (up to 16 bytes).
+ *
+ * Reads up to 16 bytes of data from the extended register space on a
+ * Slave device.
+ */
+int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
+			   size_t len)
+{
+	/* 8-bit register address, up to 16 bytes */
+	if (len == 0 || len > 16)
+		return -EINVAL;
+
+	return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READ, sdev->usid, addr,
+			     buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_read);
+
+/**
+ * spmi_ext_register_readl() - extended register read long
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (16-bit address).
+ * @buf:	buffer to be populated with data from the Slave.
+ * @len:	the request number of bytes to read (up to 8 bytes).
+ *
+ * Reads up to 8 bytes of data from the extended register space on a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
+			    size_t len)
+{
+	/* 16-bit register address, up to 8 bytes */
+	if (len == 0 || len > 8)
+		return -EINVAL;
+
+	return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READL, sdev->usid, addr,
+			     buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_readl);
+
+/**
+ * spmi_register_write() - register write
+ * @sdev:	SPMI device
+ * @addr:	slave register address (5-bit address).
+ * @data:	buffer containing the data to be transferred to the Slave.
+ *
+ * Writes 1 byte of data to a Slave device register.
+ */
+int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data)
+{
+	/* 5-bit register address */
+	if (addr > 0x1F)
+		return -EINVAL;
+
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_WRITE, sdev->usid, addr,
+			      &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_write);
+
+/**
+ * spmi_register_zero_write() - register zero write
+ * @sdev:	SPMI device.
+ * @data:	the data to be written to register 0 (7-bits).
+ *
+ * Writes data to register 0 of the Slave device.
+ */
+int spmi_register_zero_write(struct spmi_device *sdev, u8 data)
+{
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_ZERO_WRITE, sdev->usid, 0,
+			      &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_zero_write);
+
+/**
+ * spmi_ext_register_write() - extended register write
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (8-bit address).
+ * @buf:	buffer containing the data to be transferred to the Slave.
+ * @len:	the request number of bytes to read (up to 16 bytes).
+ *
+ * Writes up to 16 bytes of data to the extended register space of a
+ * Slave device.
+ */
+int spmi_ext_register_write(struct spmi_device *sdev, u8 addr, const u8 *buf,
+			    size_t len)
+{
+	/* 8-bit register address, up to 16 bytes */
+	if (len == 0 || len > 16)
+		return -EINVAL;
+
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITE, sdev->usid, addr,
+			      buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_write);
+
+/**
+ * spmi_ext_register_writel() - extended register write long
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (16-bit address).
+ * @buf:	buffer containing the data to be transferred to the Slave.
+ * @len:	the request number of bytes to read (up to 8 bytes).
+ *
+ * Writes up to 8 bytes of data to the extended register space of a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr, const u8 *buf,
+			     size_t len)
+{
+	/* 4-bit Slave Identifier, 16-bit register address, up to 8 bytes */
+	if (len == 0 || len > 8)
+		return -EINVAL;
+
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITEL, sdev->usid,
+			      addr, buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_writel);
+
+/**
+ * spmi_command_reset() - sends RESET command to the specified slave
+ * @sdev:	SPMI device.
+ *
+ * The Reset command initializes the Slave and forces all registers to
+ * their reset values. The Slave shall enter the STARTUP state after
+ * receiving a Reset command.
+ */
+int spmi_command_reset(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_RESET, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_reset);
+
+/**
+ * spmi_command_sleep() - sends SLEEP command to the specified SPMI device
+ * @sdev:	SPMI device.
+ *
+ * The Sleep command causes the Slave to enter the user defined SLEEP state.
+ */
+int spmi_command_sleep(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_SLEEP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_sleep);
+
+/**
+ * spmi_command_wakeup() - sends WAKEUP command to the specified SPMI device
+ * @sdev:	SPMI device.
+ *
+ * The Wakeup command causes the Slave to move from the SLEEP state to
+ * the ACTIVE state.
+ */
+int spmi_command_wakeup(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_WAKEUP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_wakeup);
+
+/**
+ * spmi_command_shutdown() - sends SHUTDOWN command to the specified SPMI device
+ * @sdev:	SPMI device.
+ *
+ * The Shutdown command causes the Slave to enter the SHUTDOWN state.
+ */
+int spmi_command_shutdown(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_SHUTDOWN, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_shutdown);
+
+static int spmi_drv_probe(struct device *dev)
+{
+	const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+	struct spmi_device *sdev = to_spmi_device(dev);
+	int err;
+
+	/* Ensure the slave is in ACTIVE state */
+	err = spmi_command_wakeup(sdev);
+	if (err)
+		goto fail_wakeup;
+
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	err = sdrv->probe(sdev);
+	if (err)
+		goto fail_probe;
+
+	return 0;
+
+fail_probe:
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+fail_wakeup:
+	return err;
+}
+
+static int spmi_drv_remove(struct device *dev)
+{
+	const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+
+	pm_runtime_get_sync(dev);
+	sdrv->remove(to_spmi_device(dev));
+	pm_runtime_put_noidle(dev);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+	return 0;
+}
+
+static struct bus_type spmi_bus_type = {
+	.name		= "spmi",
+	.match		= spmi_device_match,
+	.pm		= &spmi_pm_ops,
+	.probe		= spmi_drv_probe,
+	.remove		= spmi_drv_remove,
+};
+
+/**
+ * spmi_controller_alloc() - Allocate a new SPMI device
+ * @ctrl:	associated controller
+ *
+ * Caller is responsible for either calling spmi_device_add() to add the
+ * newly allocated controller, or calling spmi_device_put() to discard it.
+ */
+struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl)
+{
+	struct spmi_device *sdev;
+
+	sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!sdev)
+		return NULL;
+
+	sdev->ctrl = ctrl;
+	device_initialize(&sdev->dev);
+	sdev->dev.parent = &ctrl->dev;
+	sdev->dev.bus = &spmi_bus_type;
+	sdev->dev.type = &spmi_dev_type;
+	return sdev;
+}
+EXPORT_SYMBOL_GPL(spmi_device_alloc);
+
+/**
+ * spmi_controller_alloc() - Allocate a new SPMI controller
+ * @parent:	parent device
+ * @size:	size of private data
+ *
+ * Caller is responsible for either calling spmi_controller_add() to add the
+ * newly allocated controller, or calling spmi_controller_put() to discard it.
+ * The allocated private data region may be accessed via
+ * spmi_controller_get_drvdata()
+ */
+struct spmi_controller *spmi_controller_alloc(struct device *parent,
+					      size_t size)
+{
+	struct spmi_controller *ctrl;
+	int id;
+
+	if (WARN_ON(!parent))
+		return NULL;
+
+	ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL);
+	if (!ctrl)
+		return NULL;
+
+	device_initialize(&ctrl->dev);
+	ctrl->dev.type = &spmi_ctrl_type;
+	ctrl->dev.bus = &spmi_bus_type;
+	ctrl->dev.parent = parent;
+	ctrl->dev.of_node = parent->of_node;
+	spmi_controller_set_drvdata(ctrl, &ctrl[1]);
+
+	id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		dev_err(parent,
+			"unable to allocate SPMI controller identifier.\n");
+		spmi_controller_put(ctrl);
+		return NULL;
+	}
+
+	ctrl->nr = id;
+	dev_set_name(&ctrl->dev, "spmi-%d", id);
+
+	dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
+	return ctrl;
+}
+EXPORT_SYMBOL_GPL(spmi_controller_alloc);
+
+static void of_spmi_register_devices(struct spmi_controller *ctrl)
+{
+	struct device_node *node;
+	int err;
+
+	if (!ctrl->dev.of_node)
+		return;
+
+	for_each_available_child_of_node(ctrl->dev.of_node, node) {
+		struct spmi_device *sdev;
+		u32 reg[2];
+
+		dev_dbg(&ctrl->dev, "adding child %s\n", node->full_name);
+
+		err = of_property_read_u32_array(node, "reg", reg, 2);
+		if (err) {
+			dev_err(&ctrl->dev,
+				"node %s err (%d) does not have 'reg' property\n",
+				node->full_name, err);
+			continue;
+		}
+
+		if (reg[1] != SPMI_USID) {
+			dev_err(&ctrl->dev,
+				"node %s contains unsupported 'reg' entry\n",
+				node->full_name);
+			continue;
+		}
+
+		if (reg[0] >= SPMI_MAX_SLAVE_ID) {
+			dev_err(&ctrl->dev,
+				"invalid usid on node %s\n",
+				node->full_name);
+			continue;
+		}
+
+		dev_dbg(&ctrl->dev, "read usid %02x\n", reg[0]);
+
+		sdev = spmi_device_alloc(ctrl);
+		if (!sdev)
+			continue;
+
+		sdev->dev.of_node = node;
+		sdev->usid = (u8) reg[0];
+
+		err = spmi_device_add(sdev);
+		if (err) {
+			dev_err(&sdev->dev,
+				"failure adding device. status %d\n", err);
+			spmi_device_put(sdev);
+		}
+	}
+}
+
+/**
+ * spmi_controller_add() - Add an SPMI controller
+ * @ctrl:	controller to be registered.
+ *
+ * Register a controller previously allocated via spmi_controller_alloc() with
+ * the SPMI core.
+ */
+int spmi_controller_add(struct spmi_controller *ctrl)
+{
+	int ret;
+
+	/* Can't register until after driver model init */
+	if (WARN_ON(!spmi_bus_type.p))
+		return -EAGAIN;
+
+	ret = device_add(&ctrl->dev);
+	if (ret)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_OF))
+		of_spmi_register_devices(ctrl);
+
+	dev_dbg(&ctrl->dev, "spmi-%d registered: dev:%p\n",
+		ctrl->nr, &ctrl->dev);
+
+	return 0;
+};
+EXPORT_SYMBOL_GPL(spmi_controller_add);
+
+/* Remove a device associated with a controller */
+static int spmi_ctrl_remove_device(struct device *dev, void *data)
+{
+	struct spmi_device *spmidev = to_spmi_device(dev);
+	if (dev->type == &spmi_dev_type)
+		spmi_device_remove(spmidev);
+	return 0;
+}
+
+/**
+ * spmi_controller_remove(): remove an SPMI controller
+ * @ctrl:	controller to remove
+ *
+ * Remove a SPMI controller.  Caller is responsible for calling
+ * spmi_controller_put() to discard the allocated controller.
+ */
+void spmi_controller_remove(struct spmi_controller *ctrl)
+{
+	int dummy;
+
+	if (!ctrl)
+		return;
+
+	dummy = device_for_each_child(&ctrl->dev, NULL,
+				      spmi_ctrl_remove_device);
+	device_del(&ctrl->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_controller_remove);
+
+/**
+ * spmi_driver_register() - Register client driver with SPMI core
+ * @sdrv:	client driver to be associated with client-device.
+ *
+ * This API will register the client driver with the SPMI framework.
+ * It is typically called from the driver's module-init function.
+ */
+int spmi_driver_register(struct spmi_driver *sdrv)
+{
+	sdrv->driver.bus = &spmi_bus_type;
+	return driver_register(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(spmi_driver_register);
+
+static void __exit spmi_exit(void)
+{
+	bus_unregister(&spmi_bus_type);
+}
+module_exit(spmi_exit);
+
+static int __init spmi_init(void)
+{
+	return bus_register(&spmi_bus_type);
+}
+postcore_initcall(spmi_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SPMI module");
+MODULE_ALIAS("platform:spmi");
diff --git a/include/dt-bindings/spmi/spmi.h b/include/dt-bindings/spmi/spmi.h
new file mode 100644
index 0000000..d11e1e5
--- /dev/null
+++ b/include/dt-bindings/spmi/spmi.h
@@ -0,0 +1,18 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_SPMI_H
+#define __DT_BINDINGS_SPMI_H
+
+#define SPMI_USID	0
+#define SPMI_GSID	1
+
+#endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 45e9214..677e474 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -432,6 +432,14 @@ struct spi_device_id {
 	kernel_ulong_t driver_data;	/* Data private to the driver */
 };
 
+#define SPMI_NAME_SIZE	32
+#define SPMI_MODULE_PREFIX "spmi:"
+
+struct spmi_device_id {
+	char name[SPMI_NAME_SIZE];
+	kernel_ulong_t driver_data;	/* Data private to the driver */
+};
+
 /* dmi */
 enum dmi_field {
 	DMI_NONE,
diff --git a/include/linux/spmi.h b/include/linux/spmi.h
new file mode 100644
index 0000000..91f5eab
--- /dev/null
+++ b/include/linux/spmi.h
@@ -0,0 +1,191 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _LINUX_SPMI_H
+#define _LINUX_SPMI_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+/* Maximum slave identifier */
+#define SPMI_MAX_SLAVE_ID		16
+
+/* SPMI Commands */
+#define SPMI_CMD_EXT_WRITE		0x00
+#define SPMI_CMD_RESET			0x10
+#define SPMI_CMD_SLEEP			0x11
+#define SPMI_CMD_SHUTDOWN		0x12
+#define SPMI_CMD_WAKEUP			0x13
+#define SPMI_CMD_AUTHENTICATE		0x14
+#define SPMI_CMD_MSTR_READ		0x15
+#define SPMI_CMD_MSTR_WRITE		0x16
+#define SPMI_CMD_TRANSFER_BUS_OWNERSHIP	0x1A
+#define SPMI_CMD_DDB_MASTER_READ	0x1B
+#define SPMI_CMD_DDB_SLAVE_READ		0x1C
+#define SPMI_CMD_EXT_READ		0x20
+#define SPMI_CMD_EXT_WRITEL		0x30
+#define SPMI_CMD_EXT_READL		0x38
+#define SPMI_CMD_WRITE			0x40
+#define SPMI_CMD_READ			0x60
+#define SPMI_CMD_ZERO_WRITE		0x80
+
+/**
+ * struct spmi_device - Basic representation of an SPMI device
+ * @dev:	Driver model representation of the device.
+ * @ctrl:	SPMI controller managing the bus hosting this device.
+ * @usid:	This devices' Unique Slave IDentifier.
+ */
+struct spmi_device {
+	struct device		dev;
+	struct spmi_controller	*ctrl;
+	u8			usid;
+};
+
+static inline struct spmi_device *to_spmi_device(struct device *d)
+{
+	return container_of(d, struct spmi_device, dev);
+}
+
+static inline void *spmi_device_get_drvdata(const struct spmi_device *sdev)
+{
+	return dev_get_drvdata(&sdev->dev);
+}
+
+static inline void spmi_device_set_drvdata(struct spmi_device *sdev, void *data)
+{
+	dev_set_drvdata(&sdev->dev, data);
+}
+
+struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl);
+
+static inline void spmi_device_put(struct spmi_device *sdev)
+{
+	if (sdev)
+		put_device(&sdev->dev);
+}
+
+int spmi_device_add(struct spmi_device *sdev);
+
+void spmi_device_remove(struct spmi_device *sdev);
+
+/**
+ * struct spmi_controller - interface to the SPMI master controller
+ * @dev:	Driver model representation of the device.
+ * @nr:		board-specific number identifier for this controller/bus
+ * @cmd:	sends a non-data command sequence on the SPMI bus.
+ * @read_cmd:	sends a register read command sequence on the SPMI bus.
+ * @write_cmd:	sends a register write command sequence on the SPMI bus.
+ */
+struct spmi_controller {
+	struct device		dev;
+	unsigned int		nr;
+	int	(*cmd)(struct spmi_controller *ctrl, u8 opcode, u8 sid);
+	int	(*read_cmd)(struct spmi_controller *ctrl, u8 opcode,
+			    u8 sid, u16 addr, u8 *buf, size_t len);
+	int	(*write_cmd)(struct spmi_controller *ctrl, u8 opcode,
+			     u8 sid, u16 addr, const u8 *buf, size_t len);
+};
+
+static inline struct spmi_controller *to_spmi_controller(struct device *d)
+{
+	return container_of(d, struct spmi_controller, dev);
+}
+
+static inline
+void *spmi_controller_get_drvdata(const struct spmi_controller *ctrl)
+{
+	return dev_get_drvdata(&ctrl->dev);
+}
+
+static inline void spmi_controller_set_drvdata(struct spmi_controller *ctrl,
+					       void *data)
+{
+	dev_set_drvdata(&ctrl->dev, data);
+}
+
+struct spmi_controller *spmi_controller_alloc(struct device *parent,
+					      size_t size);
+
+/**
+ * spmi_controller_put() - decrement controller refcount
+ * @ctrl	SPMI controller.
+ */
+static inline void spmi_controller_put(struct spmi_controller *ctrl)
+{
+	if (ctrl)
+		put_device(&ctrl->dev);
+}
+
+int spmi_controller_add(struct spmi_controller *ctrl);
+void spmi_controller_remove(struct spmi_controller *ctrl);
+
+/**
+ * struct spmi_driver - SPMI slave device driver
+ * @driver:	SPMI device drivers should initialize name and owner field of
+ *		this structure.
+ * @probe:	binds this driver to a SPMI device.
+ * @remove:	unbinds this driver from the SPMI device.
+ * @shutdown:	standard shutdown callback used during powerdown/halt.
+ * @suspend:	standard suspend callback used during system suspend.
+ * @resume:	standard resume callback used during system resume.
+ *
+ * If PM runtime support is desired for a slave, a device driver can call
+ * pm_runtime_put() from their probe() routine (and a balancing
+ * pm_runtime_get() in remove()).  PM runtime support for a slave is
+ * implemented by issuing a SLEEP command to the slave on runtime_suspend(),
+ * transitioning the slave into the SLEEP state.  On runtime_resume(), a WAKEUP
+ * command is sent to the slave to bring it back to ACTIVE.
+ */
+struct spmi_driver {
+	struct device_driver driver;
+	int	(*probe)(struct spmi_device *sdev);
+	void	(*remove)(struct spmi_device *sdev);
+};
+
+static inline struct spmi_driver *to_spmi_driver(struct device_driver *d)
+{
+	return container_of(d, struct spmi_driver, driver);
+}
+
+int spmi_driver_register(struct spmi_driver *sdrv);
+
+/**
+ * spmi_driver_unregister() - unregister an SPMI client driver
+ * @sdrv:	the driver to unregister
+ */
+static inline void spmi_driver_unregister(struct spmi_driver *sdrv)
+{
+	if (sdrv)
+		driver_unregister(&sdrv->driver);
+}
+
+#define module_spmi_driver(__spmi_driver) \
+	module_driver(__spmi_driver, spmi_driver_register, \
+			spmi_driver_unregister)
+
+int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf);
+int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
+			   size_t len);
+int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
+			    size_t len);
+int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data);
+int spmi_register_zero_write(struct spmi_device *sdev, u8 data);
+int spmi_ext_register_write(struct spmi_device *sdev, u8 addr,
+			    const u8 *buf, size_t len);
+int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr,
+			     const u8 *buf, size_t len);
+int spmi_command_reset(struct spmi_device *sdev);
+int spmi_command_sleep(struct spmi_device *sdev);
+int spmi_command_wakeup(struct spmi_device *sdev);
+int spmi_command_shutdown(struct spmi_device *sdev);
+
+#endif
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v6 2/6] spmi: add generic SPMI controller binding documentation

[Josh Cartwright]

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
---
 Documentation/devicetree/bindings/spmi/spmi.txt | 41 +++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spmi/spmi.txt

diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt
new file mode 100644
index 0000000..462a42f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/spmi.txt
@@ -0,0 +1,41 @@
+System Power Management Interface (SPMI) Controller
+
+This document defines a generic set of bindings for use by SPMI controllers.  A
+controller is modelled in device tree as a node with zero or more child nodes,
+each representing a unique slave on the bus.
+
+Required properties:
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+
+Child nodes:
+
+An SPMI controller node can contain zero or more child nodes representing slave
+devices on the bus.  Child 'reg' properties are specified as an address, type
+pair.  The address must be in the range 0-15 (4 bits).  The type must be one of
+SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
+These are the identifiers "statically assigned by the system integrator", as
+per the SPMI spec.
+
+Each child node must have one and only one 'reg' entry of type SPMI_USID.
+
+#include <dt-bindings/spmi/spmi.h>
+
+	spmi@.. {
+		compatible = "...";
+		reg = <...>;
+
+		#address-cells = <2>;
+		#size-cells <0>;
+
+		child@0 {
+			compatible = "...";
+			reg = <0 SPMI_USID>;
+		};
+
+		child@7 {
+			compatible = "...";
+			reg = <7 SPMI_USID
+			       3 SPMI_GSID>;
+		};
+	};
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v6 3/6] spmi: Add MSM PMIC Arbiter SPMI controller

[Josh Cartwright]

From: Kenneth Heitke <kheitke-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Qualcomm's PMIC Arbiter SPMI controller functions as a bus master and
is used to communication with one or more PMIC (slave) devices on the
SPMI bus.  The PMIC Arbiter is actually a hardware wrapper around the
SPMI controller that provides concurrent and autonomous PMIC access
to various entities that need to communicate with the PMIC.

The SPMI controller hardware handles all of the SPMI bus activity (bus
arbitration, sequence start condition, transmission of frames, etc).
This software driver uses the PMIC Arbiter register interface to
initiate command sequences on the SPMI bus.  The status register is
read to determine when the command sequence has completed and whether
or not it completed successfully.

Signed-off-by: Kenneth Heitke <kheitke-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Signed-off-by: Josh Cartwright <joshc-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
 drivers/spmi/Kconfig         |  17 ++
 drivers/spmi/Makefile        |   2 +
 drivers/spmi/spmi-pmic-arb.c | 405 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 424 insertions(+)
 create mode 100644 drivers/spmi/spmi-pmic-arb.c

diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index 1dbfee0..80b7901 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -7,3 +7,20 @@ menuconfig SPMI
 	  SPMI (System Power Management Interface) is a two-wire
 	  serial interface between baseband and application processors
 	  and Power Management Integrated Circuits (PMIC).
+
+if SPMI
+
+config SPMI_MSM_PMIC_ARB
+	tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)"
+	depends on ARM
+	depends on ARCH_MSM || COMPILE_TEST
+	default ARCH_MSM
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in SPMI PMIC Arbiter interface on Qualcomm MSM family
+	  processors.
+
+	  This is required for communicating with Qualcomm PMICs and
+	  other devices that have the SPMI interface.
+
+endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 1de1acd..fc75104 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -2,3 +2,5 @@
 # Makefile for kernel SPMI framework.
 #
 obj-$(CONFIG_SPMI)	+= spmi.o
+
+obj-$(CONFIG_SPMI_MSM_PMIC_ARB)	+= spmi-pmic-arb.o
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
new file mode 100644
index 0000000..2dd27e8
--- /dev/null
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -0,0 +1,405 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+/* PMIC Arbiter configuration registers */
+#define PMIC_ARB_VERSION		0x0000
+#define PMIC_ARB_INT_EN			0x0004
+
+/* PMIC Arbiter channel registers */
+#define PMIC_ARB_CMD(N)			(0x0800 + (0x80 * (N)))
+#define PMIC_ARB_CONFIG(N)		(0x0804 + (0x80 * (N)))
+#define PMIC_ARB_STATUS(N)		(0x0808 + (0x80 * (N)))
+#define PMIC_ARB_WDATA0(N)		(0x0810 + (0x80 * (N)))
+#define PMIC_ARB_WDATA1(N)		(0x0814 + (0x80 * (N)))
+#define PMIC_ARB_RDATA0(N)		(0x0818 + (0x80 * (N)))
+#define PMIC_ARB_RDATA1(N)		(0x081C + (0x80 * (N)))
+
+/* Interrupt Controller */
+#define SPMI_PIC_OWNER_ACC_STATUS(M, N)	(0x0000 + ((32 * (M)) + (4 * (N))))
+#define SPMI_PIC_ACC_ENABLE(N)		(0x0200 + (4 * (N)))
+#define SPMI_PIC_IRQ_STATUS(N)		(0x0600 + (4 * (N)))
+#define SPMI_PIC_IRQ_CLEAR(N)		(0x0A00 + (4 * (N)))
+
+/* Mapping Table */
+#define SPMI_MAPPING_TABLE_REG(N)	(0x0B00 + (4 * (N)))
+#define SPMI_MAPPING_BIT_INDEX(X)	(((X) >> 18) & 0xF)
+#define SPMI_MAPPING_BIT_IS_0_FLAG(X)	(((X) >> 17) & 0x1)
+#define SPMI_MAPPING_BIT_IS_0_RESULT(X)	(((X) >> 9) & 0xFF)
+#define SPMI_MAPPING_BIT_IS_1_FLAG(X)	(((X) >> 8) & 0x1)
+#define SPMI_MAPPING_BIT_IS_1_RESULT(X)	(((X) >> 0) & 0xFF)
+
+#define SPMI_MAPPING_TABLE_LEN		255
+#define SPMI_MAPPING_TABLE_TREE_DEPTH	16	/* Maximum of 16-bits */
+
+/* Ownership Table */
+#define SPMI_OWNERSHIP_TABLE_REG(N)	(0x0700 + (4 * (N)))
+#define SPMI_OWNERSHIP_PERIPH2OWNER(X)	((X) & 0x7)
+
+/* Channel Status fields */
+enum pmic_arb_chnl_status {
+	PMIC_ARB_STATUS_DONE	= (1 << 0),
+	PMIC_ARB_STATUS_FAILURE	= (1 << 1),
+	PMIC_ARB_STATUS_DENIED	= (1 << 2),
+	PMIC_ARB_STATUS_DROPPED	= (1 << 3),
+};
+
+/* Command register fields */
+#define PMIC_ARB_CMD_MAX_BYTE_COUNT	8
+
+/* Command Opcodes */
+enum pmic_arb_cmd_op_code {
+	PMIC_ARB_OP_EXT_WRITEL = 0,
+	PMIC_ARB_OP_EXT_READL = 1,
+	PMIC_ARB_OP_EXT_WRITE = 2,
+	PMIC_ARB_OP_RESET = 3,
+	PMIC_ARB_OP_SLEEP = 4,
+	PMIC_ARB_OP_SHUTDOWN = 5,
+	PMIC_ARB_OP_WAKEUP = 6,
+	PMIC_ARB_OP_AUTHENTICATE = 7,
+	PMIC_ARB_OP_MSTR_READ = 8,
+	PMIC_ARB_OP_MSTR_WRITE = 9,
+	PMIC_ARB_OP_EXT_READ = 13,
+	PMIC_ARB_OP_WRITE = 14,
+	PMIC_ARB_OP_READ = 15,
+	PMIC_ARB_OP_ZERO_WRITE = 16,
+};
+
+/* Maximum number of support PMIC peripherals */
+#define PMIC_ARB_MAX_PERIPHS		256
+#define PMIC_ARB_PERIPH_ID_VALID	(1 << 15)
+#define PMIC_ARB_TIMEOUT_US		100
+#define PMIC_ARB_MAX_TRANS_BYTES	(8)
+
+#define PMIC_ARB_APID_MASK		0xFF
+#define PMIC_ARB_PPID_MASK		0xFFF
+
+/* interrupt enable bit */
+#define SPMI_PIC_ACC_ENABLE_BIT		BIT(0)
+
+/**
+ * spmi_pmic_arb_dev - SPMI PMIC Arbiter object
+ *
+ * @base:		address of the PMIC Arbiter core registers.
+ * @intr:		address of the SPMI interrupt control registers.
+ * @cnfg:		address of the PMIC Arbiter configuration registers.
+ * @lock:		lock to synchronize accesses.
+ * @channel:		which channel to use for accesses.
+ */
+struct spmi_pmic_arb_dev {
+	void __iomem		*base;
+	void __iomem		*intr;
+	void __iomem		*cnfg;
+	raw_spinlock_t		lock;
+	u8			channel;
+};
+
+static inline u32 pmic_arb_base_read(struct spmi_pmic_arb_dev *dev, u32 offset)
+{
+	return readl_relaxed(dev->base + offset);
+}
+
+static inline void pmic_arb_base_write(struct spmi_pmic_arb_dev *dev,
+				       u32 offset, u32 val)
+{
+	writel_relaxed(val, dev->base + offset);
+}
+
+/**
+ * pa_read_data: reads pmic-arb's register and copy 1..4 bytes to buf
+ * @bc:		byte count -1. range: 0..3
+ * @reg:	register's address
+ * @buf:	output parameter, length must be bc + 1
+ */
+static void pa_read_data(struct spmi_pmic_arb_dev *dev, u8 *buf, u32 reg, u8 bc)
+{
+	u32 data = pmic_arb_base_read(dev, reg);
+	memcpy(buf, &data, (bc & 3) + 1);
+}
+
+/**
+ * pa_write_data: write 1..4 bytes from buf to pmic-arb's register
+ * @bc:		byte-count -1. range: 0..3.
+ * @reg:	register's address.
+ * @buf:	buffer to write. length must be bc + 1.
+ */
+static void
+pa_write_data(struct spmi_pmic_arb_dev *dev, const u8 *buf, u32 reg, u8 bc)
+{
+	u32 data = 0;
+	memcpy(&data, buf, (bc & 3) + 1);
+	pmic_arb_base_write(dev, reg, data);
+}
+
+static int pmic_arb_wait_for_done(struct spmi_controller *ctrl)
+{
+	struct spmi_pmic_arb_dev *dev = spmi_controller_get_drvdata(ctrl);
+	u32 status = 0;
+	u32 timeout = PMIC_ARB_TIMEOUT_US;
+	u32 offset = PMIC_ARB_STATUS(dev->channel);
+
+	while (timeout--) {
+		status = pmic_arb_base_read(dev, offset);
+
+		if (status & PMIC_ARB_STATUS_DONE) {
+			if (status & PMIC_ARB_STATUS_DENIED) {
+				dev_err(&ctrl->dev,
+					"%s: transaction denied (0x%x)\n",
+					__func__, status);
+				return -EPERM;
+			}
+
+			if (status & PMIC_ARB_STATUS_FAILURE) {
+				dev_err(&ctrl->dev,
+					"%s: transaction failed (0x%x)\n",
+					__func__, status);
+				return -EIO;
+			}
+
+			if (status & PMIC_ARB_STATUS_DROPPED) {
+				dev_err(&ctrl->dev,
+					"%s: transaction dropped (0x%x)\n",
+					__func__, status);
+				return -EIO;
+			}
+
+			return 0;
+		}
+		udelay(1);
+	}
+
+	dev_err(&ctrl->dev,
+		"%s: timeout, status 0x%x\n",
+		__func__, status);
+	return -ETIMEDOUT;
+}
+
+/* Non-data command */
+static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+	struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+	unsigned long flags;
+	u32 cmd;
+	int rc;
+
+	/* Check for valid non-data command */
+	if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
+		return -EINVAL;
+
+	cmd = ((opc | 0x40) << 27) | ((sid & 0xf) << 20);
+
+	raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+	pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+	rc = pmic_arb_wait_for_done(ctrl);
+	raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+
+	return rc;
+}
+
+static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			     u16 addr, u8 *buf, size_t len)
+{
+	struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+	unsigned long flags;
+	u8 bc = len - 1;
+	u32 cmd;
+	int rc;
+
+	if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
+		dev_err(&ctrl->dev,
+			"pmic-arb supports 1..%d bytes per trans, but %d requested",
+			PMIC_ARB_MAX_TRANS_BYTES, len);
+		return  -EINVAL;
+	}
+
+	/* Check the opcode */
+	if (opc >= 0x60 && opc <= 0x7F)
+		opc = PMIC_ARB_OP_READ;
+	else if (opc >= 0x20 && opc <= 0x2F)
+		opc = PMIC_ARB_OP_EXT_READ;
+	else if (opc >= 0x38 && opc <= 0x3F)
+		opc = PMIC_ARB_OP_EXT_READL;
+	else
+		return -EINVAL;
+
+	cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
+
+	raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+	pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+	rc = pmic_arb_wait_for_done(ctrl);
+	if (rc)
+		goto done;
+
+	pa_read_data(pmic_arb, buf, PMIC_ARB_RDATA0(pmic_arb->channel),
+		     min_t(u8, bc, 3));
+
+	if (bc > 3)
+		pa_read_data(pmic_arb, buf + 4,
+				PMIC_ARB_RDATA1(pmic_arb->channel), bc - 4);
+
+done:
+	raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+	return rc;
+}
+
+static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			      u16 addr, const u8 *buf, size_t len)
+{
+	struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+	unsigned long flags;
+	u8 bc = len - 1;
+	u32 cmd;
+	int rc;
+
+	if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
+		dev_err(&ctrl->dev,
+			"pmic-arb supports 1..%d bytes per trans, but:%d requested",
+			PMIC_ARB_MAX_TRANS_BYTES, len);
+		return  -EINVAL;
+	}
+
+	/* Check the opcode */
+	if (opc >= 0x40 && opc <= 0x5F)
+		opc = PMIC_ARB_OP_WRITE;
+	else if (opc >= 0x00 && opc <= 0x0F)
+		opc = PMIC_ARB_OP_EXT_WRITE;
+	else if (opc >= 0x30 && opc <= 0x37)
+		opc = PMIC_ARB_OP_EXT_WRITEL;
+	else if (opc >= 0x80 && opc <= 0xFF)
+		opc = PMIC_ARB_OP_ZERO_WRITE;
+	else
+		return -EINVAL;
+
+	cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
+
+	/* Write data to FIFOs */
+	raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+	pa_write_data(pmic_arb, buf, PMIC_ARB_WDATA0(pmic_arb->channel)
+							, min_t(u8, bc, 3));
+	if (bc > 3)
+		pa_write_data(pmic_arb, buf + 4,
+				PMIC_ARB_WDATA1(pmic_arb->channel), bc - 4);
+
+	/* Start the transaction */
+	pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+	rc = pmic_arb_wait_for_done(ctrl);
+	raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+
+	return rc;
+}
+
+static int spmi_pmic_arb_probe(struct platform_device *pdev)
+{
+	struct spmi_pmic_arb_dev *pa;
+	struct spmi_controller *ctrl;
+	struct resource *res;
+	u32 channel;
+	int err, i;
+
+	ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*pa));
+	if (!ctrl)
+		return -ENOMEM;
+
+	pa = spmi_controller_get_drvdata(ctrl);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
+	pa->base = devm_ioremap_resource(&ctrl->dev, res);
+	if (IS_ERR(pa->base)) {
+		err = PTR_ERR(pa->base);
+		goto err_put_ctrl;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr");
+	pa->intr = devm_ioremap_resource(&ctrl->dev, res);
+	if (IS_ERR(pa->intr)) {
+		err = PTR_ERR(pa->intr);
+		goto err_put_ctrl;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cnfg");
+	pa->cnfg = devm_ioremap_resource(&ctrl->dev, res);
+	if (IS_ERR(pa->cnfg)) {
+		err = PTR_ERR(pa->cnfg);
+		goto err_put_ctrl;
+	}
+
+	err = of_property_read_u32(pdev->dev.of_node, "qcom,channel", &channel);
+	if (err) {
+		dev_err(&pdev->dev, "channel unspecified.\n");
+		goto err_put_ctrl;
+	}
+
+	if (channel > 5) {
+		dev_err(&pdev->dev, "invalid channel (%u) specified.\n",
+			channel);
+		goto err_put_ctrl;
+	}
+
+	pa->channel = channel;
+
+	platform_set_drvdata(pdev, ctrl);
+	raw_spin_lock_init(&pa->lock);
+
+	ctrl->cmd = pmic_arb_cmd;
+	ctrl->read_cmd = pmic_arb_read_cmd;
+	ctrl->write_cmd = pmic_arb_write_cmd;
+
+	err = spmi_controller_add(ctrl);
+	if (err)
+		goto err_put_ctrl;
+
+	dev_dbg(&ctrl->dev, "PMIC Arb Version 0x%x\n",
+		pmic_arb_base_read(pa, PMIC_ARB_VERSION));
+
+	return 0;
+
+err_put_ctrl:
+	spmi_controller_put(ctrl);
+	return err;
+}
+
+static int spmi_pmic_arb_remove(struct platform_device *pdev)
+{
+	struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+	spmi_controller_remove(ctrl);
+	spmi_controller_put(ctrl);
+	return 0;
+}
+
+static const struct of_device_id spmi_pmic_arb_match_table[] = {
+	{ .compatible = "qcom,spmi-pmic-arb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table);
+
+static struct platform_driver spmi_pmic_arb_driver = {
+	.probe		= spmi_pmic_arb_probe,
+	.remove		= spmi_pmic_arb_remove,
+	.driver		= {
+		.name	= "spmi_pmic_arb",
+		.owner	= THIS_MODULE,
+		.of_match_table = spmi_pmic_arb_match_table,
+	},
+};
+module_platform_driver(spmi_pmic_arb_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:spmi_pmic_arb");
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 5/6] spmi: document the PMIC arbiter SPMI bindings

[Josh Cartwright]

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
---
 .../bindings/spmi/qcom,spmi-pmic-arb.txt           | 61 ++++++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt

diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
new file mode 100644
index 0000000..715d099
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -0,0 +1,61 @@
+Qualcomm SPMI Controller (PMIC Arbiter)
+
+The SPMI PMIC Arbiter is found on the Snapdragon 800 Series.  It is an SPMI
+controller with wrapping arbitration logic to allow for multiple on-chip
+devices to control a single SPMI master.
+
+The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+to slave devices.
+
+See spmi.txt for the generic SPMI controller binding requirements for child
+nodes.
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+generic interrupt controller binding documentation.
+
+Required properties:
+- compatible : should be "qcom,spmi-pmic-arb".
+- reg-names  : must contain:
+     "core" - core registers
+     "intr" - interrupt controller registers
+     "cnfg" - configuration registers
+- reg : address + size pairs describing the PMIC arb register sets; order must
+        correspond with the order of entries in reg-names
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+- qcom,ee : indicates the active Execution Environment identifier (0-5)
+- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
+- interrupts : interrupt list for the PMIC Arb controller, must contain a
+               single interrupt entry for the peripheral interrupt
+- interrupt-names : corresponding interrupt names for the interrupts
+                    listed in the 'interrupts' property, must contain:
+     "periph_irq" - summary interrupt for PMIC peripherals
+- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
+- #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
+    cell 1: slave ID for the requested interrupt (0-15)
+    cell 2: peripheral ID for requested interrupt (0-255)
+    cell 3: the requested peripheral interrupt (0-7)
+    cell 4: interrupt flags indicating level-sense information, as defined in
+            dt-bindings/interrupt-controller/irq.h
+
+Example:
+
+	spmi {
+		compatible = "qcom,spmi-pmic-arb";
+		reg-names = "core", "intr", "cnfg";
+		reg = <0xfc4cf000 0x1000>,
+		      <0xfc4cb000 0x1000>,
+		      <0xfc4ca000 0x1000>;
+
+		interrupt-names = "periph_irq";
+		interrupts = <0 190 0>;
+
+		qcom,ee = <0>;
+		qcom,channel = <0>;
+
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <4>;
+	};
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation