[PATCH v2 0/3] hisi_sas add hip07 support

[PATCH v2 0/3] hisi_sas add hip07 support

[John Garry]

This patchset introduces support for hip07 SoC.

The hip07 SoC has the same v2 hw as in hip06.

Support for different reference clock is required
as some SAS registers need be programmed
differently, depending on the refclock rate.

Related patchset:
- https://patchwork.ozlabs.org/patch/665172/
  Once 4.9-rc1 is released, the D03 dts can be
  updated for the refclock.
  Note: there will be only 1 D03 dts, UEFI will update
  		the refclock rate for that board in the fdt at
  		boottime.

Differences to v1:
- dropped sas-v2 quirk amt for hip07

John Garry (3):
  devicetree: bindings: scsi: hisi_sas add hip07 support
  hisi_sas: add device tree support for hip07
  hisi_sas: add v2 hw support for different refclk

 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 1 +
 drivers/scsi/hisi_sas/hisi_sas.h                         | 2 ++
 drivers/scsi/hisi_sas/hisi_sas_main.c                    | 7 +++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c                   | 5 ++++-
 4 files changed, 14 insertions(+), 1 deletion(-)

-- 
1.9.1

[PATCH v2 1/3] devicetree: bindings: scsi: hisi_sas add hip07 support

[John Garry]

Add support for hip07 chipset to hisi_sas controller.

Chipset hip07 has v2 hw.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
index bf2411f..2a42a32 100644
--- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -6,6 +6,7 @@ Main node required properties:
   - compatible : value should be as follows:
 	(a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
 	(b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset
+	(c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset
   - sas-addr : array of 8 bytes for host SAS address
   - reg : Address and length of the SAS register
   - hisilicon,sas-syscon: phandle of syscon used for sas control
-- 
1.9.1

Re: [PATCH v2 1/3] devicetree: bindings: scsi: hisi_sas add hip07 support

[Rob Herring]

On Tue, Oct 04, 2016 at 07:11:09PM +0800, John Garry wrote:
> Add support for hip07 chipset to hisi_sas controller.
> 
> Chipset hip07 has v2 hw.
> 
> Signed-off-by: John Garry <john.garry@huawei.com>
> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
> ---
>  Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v2 2/3] hisi_sas: add device tree support for hip07

[John Garry]

Chipset hip07 incorporates v2 hw.

Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Signed-off-by: Xiang Chen <chenxiang66-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
---
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 9825a3f..758e06f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2319,6 +2319,7 @@ static int hisi_sas_v2_remove(struct platform_device *pdev)
 
 static const struct of_device_id sas_v2_of_match[] = {
 	{ .compatible = "hisilicon,hip06-sas-v2",},
+	{ .compatible = "hisilicon,hip07-sas-v2",},
 	{},
 };
 MODULE_DEVICE_TABLE(of, sas_v2_of_match);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 0/3] hisi_sas add hip07 support

[Martin K. Petersen]

>>>>> "John" == John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> writes:

John> This patchset introduces support for hip07 SoC.  The hip07 SoC has
John> the same v2 hw as in hip06.

John> Support for different reference clock is required as some SAS
John> registers need be programmed differently, depending on the
John> refclock rate.

Applied to 4.10/scsi-queue.

-- 
Martin K. Petersen	Oracle Linux Engineering
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/3] hisi_sas: add v2 hw support for different refclk

[John Garry]

The hip06 D03 and hip07 D05 boards have different
reference clock frequencies for the SAS controller.

Register PHY_CTRL needs to be programmed differently
according to this frequency, so add support for this.

The default register setting in PHY_CTRL is for 50MHz,
so only update this register when the refclk frequency
is 66MHz.

For ACPI we expect the _RST handler to set the correct
value for PHY_CTRL (we're forced to take different
approach for DT and ACPI as ACPI does not support
fixed-clock device).

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       | 2 ++
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 7 +++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 4 +++-
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 72c9852..64046c5 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -13,6 +13,7 @@
 #define _HISI_SAS_H_
 
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/dmapool.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
@@ -183,6 +184,7 @@ struct hisi_hba {
 	u32 ctrl_reset_reg;
 	u32 ctrl_reset_sts_reg;
 	u32 ctrl_clock_ena_reg;
+	u32 refclk_frequency_mhz;
 	u8 sas_addr[SAS_ADDR_SIZE];
 
 	int n_phy;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 2f872f7..9afc697 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1396,6 +1396,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 	struct hisi_hba *hisi_hba;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pdev->dev.of_node;
+	struct clk *refclk;
 
 	shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
 	if (!shost)
@@ -1432,6 +1433,12 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 			goto err_out;
 	}
 
+	refclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(refclk))
+		dev_info(dev, "no ref clk property\n");
+	else
+		hisi_hba->refclk_frequency_mhz = clk_get_rate(refclk) / 1000000;
+
 	if (device_property_read_u32(dev, "phy-count", &hisi_hba->n_phy))
 		goto err_out;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 758e06f..0763b47 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -836,7 +836,9 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
 		hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 0x0);
 		hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0);
-		hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694);
+		if (hisi_hba->refclk_frequency_mhz == 66)
+			hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694);
+		/* else, do nothing -> leave it how you found it */
 	}
 
 	for (i = 0; i < hisi_hba->queue_count; i++) {
-- 
1.9.1