[PATCH 00/12] F(x)tec Pro1X feature expansion

[PATCH 00/12] F(x)tec Pro1X feature expansion

[Dang Huynh]

This patch series expand F(x)tec Pro1X (QX1050) device tree to support
various components of the device.

Most notably:
+ SD Card slot
+ Touchscreen
+ MDSS, DRM display panel
+ WLAN (ATH10K)
+ Hall sensor and camera button

This patch series has been tested on Buildroot Linux with TQFTPSERV and
RMTFS present in userspace.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
Dang Huynh (12):
      arm64: dts: qcom: sm6115-pro1x: Add Hall Switch and Camera Button
      arm64: dts: qcom: sm6115-pro1x: Add PCA9534 IO Expander
      arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen
      arm64: dts: qcom: sm6115-pro1x: Add Caps Lock LED
      arm64: dts: qcom: sm6115-pro1x: Enable SD card slot
      arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU
      arm64: dts: qcom: sm6115-pro1x: Hook up USB3 SS
      arm64: dts: qcom: sm6115-pro1x: Update copyright year
      arm64: dts: qcom: sm6115-pro1x: Add PMI632 Type-C property
      arm64: dts: qcom: sm6115-pro1x: Enable RGB LED
      arm64: dts: qcom: sm6115-pro1x: Enable remoteprocs
      arm64: dts: qcom: sm6115-pro1x: Enable ATH10K WLAN

 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 316 +++++++++++++++++++++++-
 1 file changed, 306 insertions(+), 10 deletions(-)
---
base-commit: 41c196e567fb1ea97f68a2ffb7faab451cd90854
change-id: 20240722-qx1050-feature-expansion-7f6a2682f2ea

Best regards,
-- 
Dang Huynh <danct12@riseup.net>

[PATCH 01/12] arm64: dts: qcom: sm6115-pro1x: Add Hall Switch and Camera Button

[Dang Huynh]

The Pro1X has a flip keyboard and a single-state camera button.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 33 +++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 4a30024aa48f..5b7dd54be6b6 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -34,9 +34,24 @@ framebuffer0: framebuffer@5c000000 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-
-		pinctrl-0 = <&vol_up_n>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;
+
+		hall-switch {
+			label = "Hall Switch";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <90>;
+			wakeup-source;
+		};
+
+		key-camera {
+			label = "Camera Button";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
 
 		key-volume-up {
 			label = "Volume Up";
@@ -212,6 +227,20 @@ &sleep_clk {
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <14 4>;
+
+	hall_sensor_n: hall-sensor-n {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	key_camera_n: key-camera-n {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &ufs_mem_hc {

-- 
2.45.2

[PATCH 02/12] arm64: dts: qcom: sm6115-pro1x: Add PCA9534 IO Expander

[Dang Huynh]

F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling
touch screen VDD/VDDIO and keyboard's caps lock LED.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 5b7dd54be6b6..43b4bee72dd8 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -69,6 +69,23 @@ &dispcc {
 	status = "disabled";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	pca9534: gpio@21 {
+		compatible = "nxp,pca9534";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &pm6125_gpios {
 	vol_up_n: vol-up-n-state {
 		pins = "gpio5";
@@ -88,6 +105,10 @@ &pon_resin {
 	status = "okay";
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";

-- 
2.45.2

[PATCH 03/12] arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen

[Dang Huynh]

The Fxtec Pro1X touchscreen uses Goodix GT9286 chip.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 49 +++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 43b4bee72dd8..d91d31646b29 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -62,6 +62,20 @@ key-volume-up {
 			wakeup-source;
 		};
 	};
+
+	ts_vdd_supply: ts-vdd-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vdd_supply";
+		gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ts_vddio_supply: ts-vddio-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vddio_supply";
+		gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &dispcc {
@@ -86,6 +100,27 @@ pca9534: gpio@21 {
 	};
 };
 
+&i2c2 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt9286";
+		reg = <0x14>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_n>, <&ts_rst_n>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <80 IRQ_TYPE_LEVEL_LOW>;
+
+		irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&ts_vdd_supply>;
+		VDDIO-supply = <&ts_vddio_supply>;
+	};
+};
+
 &pm6125_gpios {
 	vol_up_n: vol-up-n-state {
 		pins = "gpio5";
@@ -262,6 +297,20 @@ key_camera_n: key-camera-n {
 		drive-strength = <2>;
 		bias-pull-up;
 	};
+
+	ts_int_n: ts-int-n {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_rst_n: ts-rst-n {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
 };
 
 &ufs_mem_hc {

-- 
2.45.2

[PATCH 04/12] arm64: dts: qcom: sm6115-pro1x: Add Caps Lock LED

[Dang Huynh]

The Pro1X has a caps lock LED on the keyboard.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index d91d31646b29..60c046fe8e52 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -8,6 +8,7 @@
 #include "sm6115.dtsi"
 #include "pm6125.dtsi"
 #include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "F(x)tec Pro1X (QX1050)";
@@ -63,6 +64,16 @@ key-volume-up {
 		};
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		capslock-led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_CAPSLOCK;
+			gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	ts_vdd_supply: ts-vdd-supply {
 		compatible = "regulator-fixed";
 		regulator-name = "ts_vdd_supply";

-- 
2.45.2

[PATCH 05/12] arm64: dts: qcom: sm6115-pro1x: Enable SD card slot

[Dang Huynh]

Fxtec Pro1X has two card slots and allow either 2xSIM cards or
1xSIM, 1xSD Card configuration.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 31 +++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 60c046fe8e52..42567545f56d 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -187,6 +187,7 @@ pm6125_l4a: l4 {
 		pm6125_l5a: l5 {
 			regulator-min-microvolt = <1648000>;
 			regulator-max-microvolt = <3056000>;
+			regulator-allow-set-load;
 		};
 
 		pm6125_l6a: l6 {
@@ -288,6 +289,36 @@ pm6125_l24a: l24 {
 	};
 };
 
+&sdc2_state_off {
+	cd-pins {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_state_on {
+	cd-pins {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&pm6125_l22a>;
+	vqmmc-supply = <&pm6125_l5a>;
+	status = "okay";
+};
+
 &sleep_clk {
 	clock-frequency = <32764>;
 };

-- 
2.45.2

[PATCH 06/12] arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

[Dang Huynh]

Fxtec Pro1x uses the same display (BOE BF060Y8M-AJ0) as Pro1.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 60 +++++++++++++++++++++++--
 1 file changed, 56 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 42567545f56d..6148cc258164 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -89,13 +89,16 @@ ts_vddio_supply: ts-vddio-supply {
 	};
 };
 
-&dispcc {
-	/* HACK: disable until a panel driver is ready to retain simplefb */
-	status = "disabled";
+&gpi_dma0 {
+	status = "okay";
 };
 
-&gpi_dma0 {
+&gpu {
 	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
+	};
 };
 
 &i2c1 {
@@ -132,6 +135,42 @@ touchscreen@14 {
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18a>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "boe,bf060y8m-aj0";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&pm6125_l9a>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm6125_gpios {
 	vol_up_n: vol-up-n-state {
 		pins = "gpio5";
@@ -340,6 +379,19 @@ key_camera_n: key-camera-n {
 		bias-pull-up;
 	};
 
+	mdss_dsi_n: mdss-dsi-n {
+		pins = "gpio82";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	panel_en_n: panel-en-n {
+		pins = "gpio65";
+		function = "gpio";
+		bias-disable;
+	};
+
 	ts_int_n: ts-int-n {
 		pins = "gpio80";
 		function = "gpio";

-- 
2.45.2

[PATCH 07/12] arm64: dts: qcom: sm6115-pro1x: Hook up USB3 SS

[Dang Huynh]

The F(x)tec Pro1X supports USB 3.0 through it's USB-C port.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 6148cc258164..a32fc27bc783 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -428,7 +428,6 @@ &usb {
 
 &usb_dwc3 {
 	/delete-property/ usb-role-switch;
-	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
 };
 
@@ -439,6 +438,12 @@ &usb_hsphy {
 	status = "okay";
 };
 
+&usb_qmpphy {
+	vdda-phy-supply = <&pm6125_l4a>;
+	vdda-pll-supply = <&pm6125_l12a>;
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };

-- 
2.45.2

[PATCH 08/12] arm64: dts: qcom: sm6115-pro1x: Update copyright year

[Dang Huynh]

It's 2024, let's update the copyright year.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index a32fc27bc783..6e9e4d9f8250 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net>
  */
 
 /dts-v1/;

-- 
2.45.2

[PATCH 09/12] arm64: dts: qcom: sm6115-pro1x: Add PMI632 Type-C property

[Dang Huynh]

The USB-C port is used for powering external devices and transfer
data from/to them.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 51 +++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 6e9e4d9f8250..88df28fc8c7e 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -7,8 +7,10 @@
 
 #include "sm6115.dtsi"
 #include "pm6125.dtsi"
+#include "pmi632.dtsi"
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "F(x)tec Pro1X (QX1050)";
@@ -181,6 +183,46 @@ vol_up_n: vol-up-n-state {
 	};
 };
 
+&pmi632_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pmi632_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pmi632_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -426,9 +468,8 @@ &usb {
 	status = "okay";
 };
 
-&usb_dwc3 {
-	/delete-property/ usb-role-switch;
-	dr_mode = "peripheral";
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
 };
 
 &usb_hsphy {
@@ -444,6 +485,10 @@ &usb_qmpphy {
 	status = "okay";
 };
 
+&usb_qmpphy_out {
+	remote-endpoint = <&pmi632_ss_in>;
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };

-- 
2.45.2

[PATCH 10/12] arm64: dts: qcom: sm6115-pro1x: Enable RGB LED

[Dang Huynh]

This device has an RGB LED. It is used for notifications.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 27 +++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 88df28fc8c7e..b434241a95b2 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -183,6 +183,33 @@ vol_up_n: vol-up-n-state {
 	};
 };
 
+&pmi632_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
 &pmi632_typec {
 	status = "okay";
 

-- 
2.45.2

[PATCH 11/12] arm64: dts: qcom: sm6115-pro1x: Enable remoteprocs

[Dang Huynh]

Enable [A,C]DSP and MPSS remote processor on this device.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index b434241a95b2..14d4f533f741 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -263,6 +263,21 @@ &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";

-- 
2.45.2

[PATCH 12/12] arm64: dts: qcom: sm6115-pro1x: Enable ATH10K WLAN

[Dang Huynh]

Enable onboard Wi-Fi on the F(x)tec Pro1X.

For reference, HW/SW identifies as:
qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
qmi fw_version 0x324103d6 fw_build_timestamp 2021-12-02 08:20
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.4-00982-QCAHLSWMTPLZ-1

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 14d4f533f741..c148ebd1c8b4 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -531,6 +531,17 @@ &usb_qmpphy_out {
 	remote-endpoint = <&pmi632_ss_in>;
 };
 
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&pm6125_l8a>;
+	vdd-1.8-xo-supply = <&pm6125_l16a>;
+	vdd-1.3-rfa-supply = <&pm6125_l17a>;
+	vdd-3.3-ch0-supply = <&pm6125_l23a>;
+
+	qcom,ath10k-calibration-variant = "Fxtec_QX1050";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };

-- 
2.45.2

Re: [PATCH 08/12] arm64: dts: qcom: sm6115-pro1x: Update copyright year

[Krzysztof Kozlowski]

On 22/07/2024 09:10, Dang Huynh wrote:
> It's 2024, let's update the copyright year.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---
>  arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> index a32fc27bc783..6e9e4d9f8250 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>  /*
> - * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
> + * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net>

Please squash it. I don't think copyright update has a merit on its own.

Best regards,
Krzysztof

Re: [PATCH 01/12] arm64: dts: qcom: sm6115-pro1x: Add Hall Switch and Camera Button

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> The Pro1X has a flip keyboard and a single-state camera button.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---
>  arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 33 +++++++++++++++++++++++--
>  1 file changed, 31 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> index 4a30024aa48f..5b7dd54be6b6 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> @@ -34,9 +34,24 @@ framebuffer0: framebuffer@5c000000 {
>  
>  	gpio-keys {
>  		compatible = "gpio-keys";
> -
> -		pinctrl-0 = <&vol_up_n>;
>  		pinctrl-names = "default";
> +		pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;

Please don't reorder these

looks good otherwise

Konrad

Re: [PATCH 02/12] arm64: dts: qcom: sm6115-pro1x: Add PCA9534 IO Expander

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling
> touch screen VDD/VDDIO and keyboard's caps lock LED.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---


Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH 03/12] arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> The Fxtec Pro1X touchscreen uses Goodix GT9286 chip.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---
>  arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 49 +++++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> index 43b4bee72dd8..d91d31646b29 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> @@ -62,6 +62,20 @@ key-volume-up {
>  			wakeup-source;
>  		};
>  	};
> +
> +	ts_vdd_supply: ts-vdd-supply {
> +		compatible = "regulator-fixed";
> +		regulator-name = "ts_vdd_supply";
> +		gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	ts_vddio_supply: ts-vddio-supply {
> +		compatible = "regulator-fixed";
> +		regulator-name = "ts_vddio_supply";
> +		gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};

I suppose you don't know the voltages for these?

>  };
>  
>  &dispcc {
> @@ -86,6 +100,27 @@ pca9534: gpio@21 {
>  	};
>  };
>  
> +&i2c2 {
> +	status = "okay";
> +	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
> +	clock-frequency = <100000>;
> +
> +	touchscreen@14 {
> +		compatible = "goodix,gt9286";
> +		reg = <0x14>;

> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts_int_n>, <&ts_rst_n>;

reverse order, shift these down below supplies

> +
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <80 IRQ_TYPE_LEVEL_LOW>;

interrupts-extended

Konrad

Re: [PATCH 04/12] arm64: dts: qcom: sm6115-pro1x: Add Caps Lock LED

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> The Pro1X has a caps lock LED on the keyboard.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---
>  arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> index d91d31646b29..60c046fe8e52 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> @@ -8,6 +8,7 @@
>  #include "sm6115.dtsi"
>  #include "pm6125.dtsi"
>  #include <dt-bindings/arm/qcom,ids.h>
> +#include <dt-bindings/leds/common.h>
>  
>  / {
>  	model = "F(x)tec Pro1X (QX1050)";
> @@ -63,6 +64,16 @@ key-volume-up {
>  		};
>  	};
>  
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		capslock-led {
> +			color = <LED_COLOR_ID_GREEN>;
> +			function = LED_FUNCTION_CAPSLOCK;
> +			gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>;

You may want to take a look at msm8998-fxtec-pro1.dts which has a
bit more properties describing it

Konrad

Re: [PATCH 03/12] arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen

[Dang Huynh]

> On 22.07.2024 9:10 AM, Dang Huynh wrote:
> > +
> > +	ts_vdd_supply: ts-vdd-supply {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "ts_vdd_supply";
> > +		gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> > +
> > +	ts_vddio_supply: ts-vddio-supply {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "ts_vddio_supply";
> > +		gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> 
> I suppose you don't know the voltages for these?
> 

Nope, no schematics to verify.

Re: [PATCH 06/12] arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> Fxtec Pro1x uses the same display (BOE BF060Y8M-AJ0) as Pro1.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---

[...]


> +	panel: panel@0 {
> +		compatible = "boe,bf060y8m-aj0";
> +		reg = <0>;
> +
> +		reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
> +
> +		vddio-supply = <&pm6125_l9a>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&mdss_dsi_n &panel_en_n>;

pinctrl-n
pinctrl-names


> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&mdss_dsi0_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss_dsi0_out {
> +	data-lanes = <0 1 2 3>;
> +	remote-endpoint = <&panel_in>;
> +};
> +
> +&mdss_dsi0_phy {
> +	status = "okay";

No power supplies?

Konrad

Re: [PATCH 10/12] arm64: dts: qcom: sm6115-pro1x: Enable RGB LED

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> This device has an RGB LED. It is used for notifications.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH 12/12] arm64: dts: qcom: sm6115-pro1x: Enable ATH10K WLAN

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> Enable onboard Wi-Fi on the F(x)tec Pro1X.
> 
> For reference, HW/SW identifies as:
> qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
> qmi fw_version 0x324103d6 fw_build_timestamp 2021-12-02 08:20
> fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.4-00982-QCAHLSWMTPLZ-1
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---
>  arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> index 14d4f533f741..c148ebd1c8b4 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> @@ -531,6 +531,17 @@ &usb_qmpphy_out {
>  	remote-endpoint = <&pmi632_ss_in>;
>  };
>  
> +&wifi {
> +	status = "okay";

status goes last

Konrad

Re: [PATCH 06/12] arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

[Dang Huynh]

> > +&mdss_dsi0_phy {
> > +	status = "okay";
> 
> No power supplies?
> 
> Konrad

Doesn't seem to be defined anywhere on downstream, may be hardware controlled.

Re: [PATCH 06/12] arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

[Konrad Dybcio]

On 22.07.2024 11:17 AM, Dang Huynh wrote:
>>> +&mdss_dsi0_phy {
>>> +	status = "okay";
>>
>> No power supplies?
>>
>> Konrad
> 
> Doesn't seem to be defined anywhere on downstream, may be hardware controlled.

my downstream suggests L1b

Konrad

Re: [PATCH 07/12] arm64: dts: qcom: sm6115-pro1x: Hook up USB3 SS

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> The F(x)tec Pro1X supports USB 3.0 through it's USB-C port.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---


Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH 09/12] arm64: dts: qcom: sm6115-pro1x: Add PMI632 Type-C property

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> The USB-C port is used for powering external devices and transfer
> data from/to them.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konradqmpphy_out {
> +	remote-endpoint = <&pmi632_ss_in>;
> +};
> +
>  &xo_board {
>  	clock-frequency = <19200000>;
>  };
> 

Re: [PATCH 11/12] arm64: dts: qcom: sm6115-pro1x: Enable remoteprocs

[Konrad Dybcio]

On 22.07.2024 9:10 AM, Dang Huynh wrote:
> Enable [A,C]DSP and MPSS remote processor on this device.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad