Re: [PATCH V3 3/9] dt-bindings: pinctrl: qcom: Add support for ipq5018

[Rob Herring <robh@kernel.org>]

On Fri, 14 Apr 2023 15:59:21 +0530, Sricharan Ramabadhran wrote:
> Add device tree binding Documentation details for ipq5018
> pinctrl driver.
> 
> Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  [v3] Fixed review comments and DTS schema warnings
> 
>  .../bindings/pinctrl/qcom,ipq5018-tlmm.yaml        | 129 +++++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.example.dtb: pinctrl@1000000: uart2-state: 'oneOf' conditional failed, one must be fixed:
	'bias-pull-down', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
	'blsp2_uart' is not one of ['atest_char', 'audio_pdm0', 'audio_pdm1', 'audio_rxbclk', 'audio_rxd', 'audio_rxfsync', 'audio_rxmclk', 'audio_txbclk', 'audio_txd', 'audio_txfsync', 'audio_txmclk', 'blsp0_i2c', 'blsp0_spi', 'blsp0_uart0', 'blsp0_uart1', 'blsp1_i2c0', 'blsp1_i2c1', 'blsp1_spi0', 'blsp1_spi1', 'blsp1_uart0', 'blsp1_uart1', 'blsp1_uart2', 'blsp2_i2c0', 'blsp2_i2c1', 'blsp2_spi', 'blsp2_spi0', 'blsp2_spi1', 'btss', 'burn0', 'burn1', 'cri_trng', 'cri_trng0', 'cri_trng1', 'cxc_clk', 'cxc_data', 'dbg_out', 'eud_gpio', 'gcc_plltest', 'gcc_tlmm', 'gpio', 'led0', 'led2', 'mac0', 'mac1', 'mdc', 'mdio', 'pcie0_clk', 'pcie0_wake', 'pcie1_clk', 'pcie1_wake', 'pll_test', 'prng_rosc', 'pwm0', 'pwm1', 'pwm2', 'pwm3', 'qdss_cti_trig_in_a0', 'qdss_cti_trig_in_a1', 'qdss_cti_trig_in_b0', 'qdss_cti_trig_in_b1', 'qdss_cti_trig_out_a0', 'qdss_cti_trig_out_a1', 'qdss_cti_trig_out_b0', 'qdss_cti_trig_out_b1', 'qdss_traceclk_a', 'qdss_traceclk_b', 'qdss_tracectl_a', 'qdss_tracectl_b', 'qdss_trac
 edata_a', 'qdss_tracedata_b', 'qspi_clk', 'qspi_cs', 'qspi_data', 'reset_out', 'sdc1_clk', 'sdc1_cmd', 'sdc1_data', 'wci_txd', 'wci_rxd', 'wsa_swrm', 'wsi_clk3', 'wsi_data3', 'wsis_reset', 'xfem']
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1681468167-11689-4-git-send-email-quic_srichara@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.