Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000

[Rob Herring <robh@kernel.org>]

On Fri, 22 Mar 2024 19:05:08 -0300, Marcelo Schmitt wrote:
> Add device tree documentation for AD4000 series of ADC devices.
> 
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf
> 
> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
> ---
> Pasting relevant comment from cover letter here to aid reviewers.
> 
> These devices have the same SPI (Strange Peripheral Interface) as AD7944
> devices, which has been documented in ad7944.rst [1].
> The device tree description for SPI connections and mode can be the same as of
> ad7944 adi,spi-mode [2].
> Because ad4000 driver does not currently support daisy-chain mode, I simplified
> things a little bit. If having a more complete doc is preferred, I'm fine
> changing to that.
> 
> [1]: https://lore.kernel.org/linux-iio/20240313-mainline-ad7944-doc-v1-2-7860416726e4@baylibre.com/
> [2]: https://lore.kernel.org/linux-iio/20240304-ad7944-mainline-v5-1-f0a38cea8901@baylibre.com/
> 
>  .../bindings/iio/adc/adi,ad4000.yaml          | 151 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 158 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad4000.example.dtb: adc@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
	from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad4000.example.dtb: adc@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
	from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/81665b5f0d37d593e6d299528de8d68da8574077.1711131830.git.marcelo.schmitt@analog.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.