Re: [PATCH 1/3] dt-bindings: clock: Add bindings for Canaan K230 clock controller

["Rob Herring (Arm)" <robh@kernel.org>]

On Sun, 29 Dec 2024 21:21:08 +0800, Xukai Wang wrote:
> This patch adds the Device Tree binding for the clock controller
> on Canaan k230. The binding defines the new clocks available and
> the required properties to configure them correctly.
> 
> Signed-off-by: Xukai Wang <kingxukai@zohomail.com>
> ---
>  .../devicetree/bindings/clock/canaan,k230-clk.yaml | 41 ++++++++++++++++++
>  include/dt-bindings/clock/k230-clk.h               | 49 ++++++++++++++++++++++
>  2 files changed, 90 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/canaan,k230-clk.example.dtb: clock-controller@91102000: clocks: 1 was expected
	from schema $id: http://devicetree.org/schemas/clock/canaan,k230-clk.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241229-b4-k230-clk-v1-1-221a917e80ed@zohomail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.