Re: [PATCH 0/2] Add support for IQ-8275-evk board

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 23 Jun 2025 18:34:18 +0530, Umang Chheda wrote:
> This series:
> 
> Add support for Qualcomm's IQ-8275-evk board using QCS8275 SOC.
> 
> QCS8275 is another SoC under IQ8 series of SoCs. Unlike QCS8300
> which has safety features, it doesn't have safety features which
> affects thermal management.
> 
> IQ8 EVK board is a single board computer (SBC) that supports various
> industrial applications, including factory automation, industrial
> robots, drones, edge AI boxes, machine vision, autonomous mobile
> robots (AMRs), and industrial gateways.
> 
> Below are detailed informations on IQ-8275-evk HW:
> ------------------------------------------------------
> QCS8275 SOM is stacked on top of IQ-8275-evk board.
> On top of IQ-8275-evk board additional mezzanine boards can be stacked
> in future.
> IQ-8275-evk is single board supporting these peripherals:
>   - Storage: 1 × 128 GB UFS, micro-SD card, EEPROMs for MACs,
>     eMMC on mezzanine card
>   - Audio/Video, Camera & Display ports
>   - Connectivity: RJ45 2.5GbE, WLAN/Bluetooth, CAN/CAN-FD
>   - PCIe ports
>   - USB & UART ports
> 
> Currently basic features like DSPs, UFS and 'boot to shell' via
> uart console are enabled.
> 
> Umang Chheda (2):
>   dt-bindings: arm: qcom: Add bindings for IQ8 EVK board
>   arm64: dts: qcom: Add support for QCS8275 IQ8 EVK
> 
>  .../devicetree/bindings/arm/qcom.yaml         |   7 +
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/qcs8275-iq-8275-evk.dts     | 241 ++++++++++++++++++
>  3 files changed, 249 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs8275-iq-8275-evk.dts
> 
> --
> 2.25.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/v6.16-rc1-5-g700a4c3f95a3 (exact match)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250623130420.3981916-1-umang.chheda@oss.qualcomm.com:

arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dtb: panel@0 (samsung,lsl080al03): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#