[PATCH v5 0/2] usb: cdns3: support configurations without DRD block

[PATCH v5 0/2] usb: cdns3: support configurations without DRD block

[Pawel Laszczak via B4 Relay]

usb: cdns3: support configurations without DRD block

This series adds support for Cadence USBSSP controllers in hardware
layouts where the Dual-Role Device (DRD) register block is either
missing or inaccessible.

In such configurations, the controller is hardwired to a single role
(either host or device) and the driver must skip all OTG/DRD register
accesses to avoid bus errors or incorrect role detection.

The solution introduces a new 'no_drd' property that can be passed
via DT or software nodes. When set, the driver:
1. Skips DRD register mapping and IRQ requests.
2. Uses a different BAR indexing logic for PCI-based configurations
   (32-bit addressing layout).
3. Hardwires the role based on 'dr_mode'.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
---
Note: This series is based on current linux-next. I am aware of Peter
Chen's recent refactoring series ("usb: cdns3: plat: Expose platform
core driver as library"). Although there is a minor conflict in
cdns3-plat.c, Peter has already provided an Acked-by for this version.
I am happy to provide a rebased v6 as soon as Peter's changes land in
linux-next if required.
---
v5:
- Implemented strict conditional validation using if-then-else logic.
- Enforced 2 register/interrupt items and required 'dr_mode'
  (host or peripheral) when 'no_drd' is present.
- Enforced the standard 3 register/interrupt items (otg, host, dev)
  when 'no_drd' is absent to ensure backward compatibility.
- Updated 'reg-names' and 'interrupt-names' to use enums in the main
  properties section to support flexible resource ordering during
  validation.

v4:
  - Added DT binding documentation for the 'no_drd' property.
  - Relaxed 'reg' and 'interrupts' requirements in the DT schema (minItems 2)
    to allow configurations where the OTG/DRD register block is missing.
  - Moved PCI_DEVICE_ID_CDNS_UDC_USBSSP from pci_ids.h to cdnsp-pci.c
    to keep the global PCI ID list clean.

v3:
  - Improved descriptions and comments for better clarity.
  - Introduced the 'no_drd' property to indicate missing DRD register block.
  - Added support for fixed host-only and device-only configurations.
  - Ensured cdns_otg_disable_irq is called only when no_drd is false.
  - Updated cdns_drd_gadget_on/off to ensure PHY mode is correctly
    handled even if DRD is disabled.

v2:
  - Changed otg_irq to be optional.
  - Added cdns->no_drd check in cdns_power_is_lost.
  - Added cdns->no_drd check in cdns_get_id.

---

---
Pawel Laszczak (2):
      dt-bindings: usb: cdns3: Add no_drd property
      usb: cdnsp: Add support for device-only configuration

 .../devicetree/bindings/usb/cdns,usb3.yaml         | 67 +++++++++++++++++++---
 drivers/usb/cdns3/cdns3-plat.c                     | 26 +++++----
 drivers/usb/cdns3/cdnsp-pci.c                      | 47 ++++++++++++---
 drivers/usb/cdns3/core.c                           |  3 +-
 drivers/usb/cdns3/core.h                           |  4 ++
 drivers/usb/cdns3/drd.c                            | 44 +++++++++++++-
 6 files changed, 159 insertions(+), 32 deletions(-)
---
base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
change-id: 20260512-b4-no_drd_config-f530f1f16d8a

Best regards,
--  
Pawel Laszczak <pawell@cadence.com>

[PATCH v5 1/2] dt-bindings: usb: cdns3: Add no_drd property

[Pawel Laszczak via B4 Relay]

From: Pawel Laszczak <pawell@cadence.com>

Introduce a new boolean property 'no_drd' for Cadence USBSS/USBSSP
controllers to support hardware configurations where the Dual-Role
Device (DRD) register block is missing or inaccessible.

When 'no_drd' is present:
- The 'otg' register and interrupt resources are not required.
- The 'reg' and 'interrupts' properties are restricted to 2 items
  (host and device).
- 'dr_mode' must be explicitly set to either 'host' or 'peripheral'.

When 'no_drd' is absent, the binding maintains backward compatibility
by requiring all 3 resource sets (otg, host, dev).

To achieve this, the schema is updated with an if-then-else logic
and 'reg-names'/'interrupt-names' use enums to allow flexible
ordering during validation.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
---
v5:
- Implemented strict conditional validation using if-then-else logic.
- Enforced 2 register/interrupt items and required 'dr_mode'
  (host or peripheral) when 'no_drd' is present.
- Enforced the standard 3 register/interrupt items (otg, host, dev)
  when 'no_drd' is absent to ensure backward compatibility.
- Updated 'reg-names' and 'interrupt-names' to use enums in the main
  properties section to support flexible resource ordering during
  validation.
---
---
 .../devicetree/bindings/usb/cdns,usb3.yaml         | 67 +++++++++++++++++++---
 1 file changed, 58 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index 2d95fb7321af..5d9bea62729c 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -20,19 +20,21 @@ properties:
     const: cdns,usb3
 
   reg:
+    minItems: 2
     items:
       - description: OTG controller registers
       - description: XHCI Host controller registers
       - description: DEVICE controller registers
 
   reg-names:
+    minItems: 2
     items:
-      - const: otg
-      - const: xhci
-      - const: dev
+      - enum: [ otg, xhci, dev ]
+      - enum: [ otg, xhci, dev ]
+      - enum: [ otg, xhci, dev ]
 
   interrupts:
-    minItems: 3
+    minItems: 2
     items:
       - description: XHCI host controller interrupt
       - description: Device controller interrupt
@@ -41,12 +43,12 @@ properties:
                      cleared by xhci core, this interrupt is optional
 
   interrupt-names:
-    minItems: 3
+    minItems: 2
     items:
-      - const: host
-      - const: peripheral
-      - const: otg
-      - const: wakeup
+      - enum: [ host, peripheral, otg, wakeup ]
+      - enum: [ host, peripheral, otg, wakeup ]
+      - enum: [ host, peripheral, otg, wakeup ]
+      - enum: [ host, peripheral, otg, wakeup ]
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
@@ -79,6 +81,13 @@ properties:
     description: Enable resetting of PHY if Rx fail is detected
     type: boolean
 
+  no_drd:
+    description:
+      Indicates that the Dual-Role Device (DRD) register block is not
+      implemented or is inaccessible. In this case, the controller
+      must operate in a fixed peripheral or host mode.
+    type: boolean
+
 dependencies:
   port: [ usb-role-switch ]
 
@@ -93,6 +102,46 @@ allOf:
   - $ref: usb-drd.yaml#
   - $ref: usb-xhci.yaml#
 
+  - if:
+      properties:
+        no_drd: true
+      required:
+        - no_drd
+    then:
+      required:
+        - dr_mode
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          items:
+            - const: xhci
+            - const: dev
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: host
+            - const: peripheral
+        dr_mode:
+          enum: [host, peripheral]
+    else:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          items:
+            - const: otg
+            - const: xhci
+            - const: dev
+        interrupts:
+          minItems: 3
+        interrupt-names:
+          items:
+            - const: host
+            - const: peripheral
+            - const: otg
+
 unevaluatedProperties: false
 
 examples:

-- 
2.43.0

[PATCH v5 2/2] usb: cdnsp: Add support for device-only configuration

[Pawel Laszczak via B4 Relay]

From: Pawel Laszczak <pawell@cadence.com>

This patch introduces support for the Cadence USBSSP (cdnsp)
controller in hardware configurations where the Dual-Role Device (DRD)
register block is not implemented or is inaccessible.

In such cases, the driver cannot rely on the DRD logic to manage roles
and must operate exclusively in a fixed peripheral/host mode.

The change in BAR indexing (from BAR 2 to BAR 1) is a direct
consequence of the 32-bit addressing used in this specific
DRD-disabled hardware layout, compared to the 64-bit addressing
used in DRD-enabled configurations.

Tested on a PCI platform with a hardware configuration that lacks
DRD support. Platform-side changes are included to support the PCI
glue layer's property injection to handle this specific layout.

Acked-by: Peter Chen <peter.chen@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
---
 drivers/usb/cdns3/cdns3-plat.c | 26 +++++++++++++----------
 drivers/usb/cdns3/cdnsp-pci.c  | 47 ++++++++++++++++++++++++++++++++++--------
 drivers/usb/cdns3/core.c       |  3 ++-
 drivers/usb/cdns3/core.h       |  4 ++++
 drivers/usb/cdns3/drd.c        | 44 +++++++++++++++++++++++++++++++++++++--
 5 files changed, 101 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
index 3fe3109a3688..86c963a072db 100644
--- a/drivers/usb/cdns3/cdns3-plat.c
+++ b/drivers/usb/cdns3/cdns3-plat.c
@@ -81,6 +81,7 @@ static int cdns3_plat_probe(struct platform_device *pdev)
 	if (cdns->pdata && cdns->pdata->override_apb_timeout)
 		cdns->override_apb_timeout = cdns->pdata->override_apb_timeout;
 
+	cdns->no_drd = device_property_read_bool(dev, "no_drd");
 	platform_set_drvdata(pdev, cdns);
 
 	ret = platform_get_irq_byname(pdev, "host");
@@ -113,21 +114,24 @@ static int cdns3_plat_probe(struct platform_device *pdev)
 
 	cdns->dev_regs	= regs;
 
-	cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
-	if (cdns->otg_irq < 0)
-		return dev_err_probe(dev, cdns->otg_irq,
-				     "Failed to get otg IRQ\n");
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg");
-	if (!res) {
-		dev_err(dev, "couldn't get otg resource\n");
-		return -ENXIO;
+	if (!cdns->no_drd) {
+		cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
+		if (cdns->otg_irq < 0)
+			return dev_err_probe(dev, cdns->otg_irq,
+					     "Failed to get otg IRQ\n");
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg");
+		if (!res) {
+			dev_err(dev, "couldn't get otg resource\n");
+			return -ENXIO;
+		}
+		cdns->otg_res = *res;
+	} else {
+		dev_dbg(dev, "No DRD support\n");
 	}
 
 	cdns->phyrst_a_enable = device_property_read_bool(dev, "cdns,phyrst-a-enable");
 
-	cdns->otg_res = *res;
-
 	cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
 	if (cdns->wakeup_irq == -EPROBE_DEFER)
 		return cdns->wakeup_irq;
diff --git a/drivers/usb/cdns3/cdnsp-pci.c b/drivers/usb/cdns3/cdnsp-pci.c
index 432007cfe695..feb916229870 100644
--- a/drivers/usb/cdns3/cdnsp-pci.c
+++ b/drivers/usb/cdns3/cdnsp-pci.c
@@ -19,6 +19,7 @@
 
 struct cdnsp_wrap {
 	struct platform_device *plat_dev;
+	struct property_entry prop[3];
 	struct resource dev_res[6];
 	int devfn;
 };
@@ -29,10 +30,15 @@ struct cdnsp_wrap {
 #define RES_HOST_ID		3
 #define RES_DEV_ID		4
 #define RES_DRD_ID		5
-
+/* DRD PCI configuration - 64-bit addressing */
+/* First PCI function */
 #define PCI_BAR_HOST		0
-#define PCI_BAR_OTG		0
 #define PCI_BAR_DEV		2
+/* Second PCI function */
+#define PCI_BAR_OTG		0
+/* Device only PCI configuration - 32-bit addressing */
+/* First PCI function */
+#define PCI_BAR_ONLY_DEV	1
 
 #define PCI_DEV_FN_HOST_DEVICE	0
 #define PCI_DEV_FN_OTG		1
@@ -40,6 +46,7 @@ struct cdnsp_wrap {
 #define PCI_DRIVER_NAME		"cdns-pci-usbssp"
 #define PLAT_DRIVER_NAME	"cdns-usb3"
 
+#define PCI_DEVICE_ID_CDNS_UDC_USBSSP   0x0400
 #define CHICKEN_APB_TIMEOUT_VALUE	0x1C20
 
 static struct pci_dev *cdnsp_get_second_fun(struct pci_dev *pdev)
@@ -65,6 +72,7 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
 	struct cdnsp_wrap *wrap;
 	struct resource *res;
 	struct pci_dev *func;
+	bool no_drd = false;
 	int ret = 0;
 
 	/*
@@ -75,11 +83,14 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
 		    pdev->devfn != PCI_DEV_FN_OTG))
 		return -EINVAL;
 
+	if (pdev->device == PCI_DEVICE_ID_CDNS_UDC_USBSSP)
+		no_drd = true;
+
 	func = cdnsp_get_second_fun(pdev);
-	if (!func)
+	if (!func && !no_drd)
 		return -EINVAL;
 
-	if (func->class == PCI_CLASS_SERIAL_USB_XHCI ||
+	if ((func && func->class == PCI_CLASS_SERIAL_USB_XHCI) ||
 	    pdev->class == PCI_CLASS_SERIAL_USB_XHCI) {
 		ret = -EINVAL;
 		goto put_pci;
@@ -93,7 +104,7 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	if (pci_is_enabled(func)) {
+	if (func && pci_is_enabled(func)) {
 		wrap = pci_get_drvdata(func);
 	} else {
 		wrap = kzalloc_obj(*wrap);
@@ -106,10 +117,12 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
 	res = wrap->dev_res;
 
 	if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) {
+		int bar_dev = no_drd ? PCI_BAR_ONLY_DEV : PCI_BAR_DEV;
+
 		/* Function 0: host(BAR_0) + device(BAR_2). */
 		dev_dbg(&pdev->dev, "Initialize Device resources\n");
-		res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
-		res[RES_DEV_ID].end = pci_resource_end(pdev, PCI_BAR_DEV);
+		res[RES_DEV_ID].start = pci_resource_start(pdev, bar_dev);
+		res[RES_DEV_ID].end = pci_resource_end(pdev, bar_dev);
 		res[RES_DEV_ID].name = "dev";
 		res[RES_DEV_ID].flags = IORESOURCE_MEM;
 		dev_dbg(&pdev->dev, "USBSSP-DEV physical base addr: %pa\n",
@@ -145,9 +158,20 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
 		wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
 	}
 
-	if (pci_is_enabled(func)) {
+	if (no_drd || pci_is_enabled(func)) {
+		u8 idx = 0;
+
 		/* set up platform device info */
 		pdata.override_apb_timeout = CHICKEN_APB_TIMEOUT_VALUE;
+
+		if (no_drd) {
+			wrap->prop[idx++] = PROPERTY_ENTRY_STRING("dr_mode", "peripheral");
+			wrap->prop[idx++] = PROPERTY_ENTRY_BOOL("no_drd");
+		} else {
+			wrap->prop[idx++] = PROPERTY_ENTRY_STRING("dr_mode", "otg");
+			wrap->prop[idx++] = PROPERTY_ENTRY_BOOL("usb-role-switch");
+		}
+
 		memset(&plat_info, 0, sizeof(plat_info));
 		plat_info.parent = &pdev->dev;
 		plat_info.fwnode = pdev->dev.fwnode;
@@ -158,6 +182,7 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
 		plat_info.dma_mask = pdev->dma_mask;
 		plat_info.data = &pdata;
 		plat_info.size_data = sizeof(pdata);
+		plat_info.properties = wrap->prop;
 		wrap->devfn = pdev->devfn;
 		/* register platform device */
 		wrap->plat_dev = platform_device_register_full(&plat_info);
@@ -185,13 +210,17 @@ static void cdnsp_pci_remove(struct pci_dev *pdev)
 	if (wrap->devfn == pdev->devfn)
 		platform_device_unregister(wrap->plat_dev);
 
-	if (!pci_is_enabled(func))
+	if (!func || !pci_is_enabled(func))
 		kfree(wrap);
 
 	pci_dev_put(func);
 }
 
 static const struct pci_device_id cdnsp_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_UDC_USBSSP),
+	  .class = PCI_CLASS_SERIAL_USB_DEVICE },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_UDC_USBSSP),
+	  .class = PCI_CLASS_SERIAL_USB_CDNS },
 	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USBSSP),
 	  .class = PCI_CLASS_SERIAL_USB_DEVICE },
 	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USBSSP),
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index 6a8d1fefbc0d..504bdf13ea80 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -70,7 +70,8 @@ static void cdns_role_stop(struct cdns *cdns)
 static void cdns_exit_roles(struct cdns *cdns)
 {
 	cdns_role_stop(cdns);
-	cdns_drd_exit(cdns);
+	if (!cdns->no_drd)
+		cdns_drd_exit(cdns);
 }
 
 /**
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
index bca973b999a4..8c492fda924c 100644
--- a/drivers/usb/cdns3/core.h
+++ b/drivers/usb/cdns3/core.h
@@ -84,6 +84,9 @@ struct cdns3_platform_data {
  *                        value in CHICKEN_BITS_3 will be preserved.
  * @gadget_init: pointer to gadget initialization function
  * @host_init: pointer to host initialization function
+ * @no_drd: DRD register block is inaccessible. The controller is hardwired to
+ *          single role (host or device) or the logic for role switching is
+ *          missing.
  */
 struct cdns {
 	struct device			*dev;
@@ -124,6 +127,7 @@ struct cdns {
 	u32                             override_apb_timeout;
 	int (*gadget_init)(struct cdns *cdns);
 	int (*host_init)(struct cdns *cdns);
+	bool				no_drd;
 };
 
 int cdns_hw_role_switch(struct cdns *cdns);
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
index 84fb38a5723a..f87cf85cb97a 100644
--- a/drivers/usb/cdns3/drd.c
+++ b/drivers/usb/cdns3/drd.c
@@ -87,6 +87,9 @@ int cdns_get_id(struct cdns *cdns)
 {
 	int id;
 
+	if (cdns->no_drd)
+		return 0;
+
 	id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
 	dev_dbg(cdns->dev, "OTG ID: %d", id);
 
@@ -107,7 +110,7 @@ void cdns_clear_vbus(struct cdns *cdns)
 {
 	u32 reg;
 
-	if (cdns->version != CDNSP_CONTROLLER_V2)
+	if (cdns->version != CDNSP_CONTROLLER_V2 || cdns->no_drd)
 		return;
 
 	reg = readl(&cdns->otg_cdnsp_regs->override);
@@ -120,7 +123,7 @@ void cdns_set_vbus(struct cdns *cdns)
 {
 	u32 reg;
 
-	if (cdns->version != CDNSP_CONTROLLER_V2)
+	if (cdns->version != CDNSP_CONTROLLER_V2 || cdns->no_drd)
 		return;
 
 	reg = readl(&cdns->otg_cdnsp_regs->override);
@@ -181,6 +184,9 @@ int cdns_drd_host_on(struct cdns *cdns)
 	u32 val, ready_bit;
 	int ret;
 
+	if (cdns->no_drd)
+		goto phy_set;
+
 	/* Enable host mode. */
 	writel(OTGCMD_HOST_BUS_REQ | OTGCMD_OTG_DIS,
 	       &cdns->otg_regs->cmd);
@@ -197,6 +203,7 @@ int cdns_drd_host_on(struct cdns *cdns)
 	if (ret)
 		dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
 
+phy_set:
 	phy_set_mode(cdns->usb2_phy, PHY_MODE_USB_HOST);
 	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST);
 	return ret;
@@ -210,6 +217,9 @@ void cdns_drd_host_off(struct cdns *cdns)
 {
 	u32 val;
 
+	if (cdns->no_drd)
+		goto phy_set;
+
 	writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
 	       OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
 	       &cdns->otg_regs->cmd);
@@ -218,6 +228,8 @@ void cdns_drd_host_off(struct cdns *cdns)
 	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
 				  !(val & OTGSTATE_HOST_STATE_MASK),
 				  1, 2000000);
+
+phy_set:
 	phy_set_mode(cdns->usb2_phy, PHY_MODE_INVALID);
 	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
 }
@@ -234,6 +246,9 @@ int cdns_drd_gadget_on(struct cdns *cdns)
 	u32 ready_bit;
 	int ret, val;
 
+	if (cdns->no_drd)
+		goto phy_set;
+
 	/* switch OTG core */
 	writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
 
@@ -251,6 +266,7 @@ int cdns_drd_gadget_on(struct cdns *cdns)
 		return ret;
 	}
 
+phy_set:
 	phy_set_mode(cdns->usb2_phy, PHY_MODE_USB_DEVICE);
 	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE);
 	return 0;
@@ -265,6 +281,9 @@ void cdns_drd_gadget_off(struct cdns *cdns)
 {
 	u32 val;
 
+	if (cdns->no_drd)
+		goto phy_set;
+
 	/*
 	 * Driver should wait at least 10us after disabling Device
 	 * before turning-off Device (DEV_BUS_DROP).
@@ -277,6 +296,8 @@ void cdns_drd_gadget_off(struct cdns *cdns)
 	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
 				  !(val & OTGSTATE_DEV_STATE_MASK),
 				  1, 2000000);
+
+phy_set:
 	phy_set_mode(cdns->usb2_phy, PHY_MODE_INVALID);
 	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
 }
@@ -392,6 +413,19 @@ int cdns_drd_init(struct cdns *cdns)
 	u32 state, reg;
 	int ret;
 
+	if (cdns->no_drd) {
+		cdns->dr_mode = usb_get_dr_mode(cdns->dev);
+		cdns->version = CDNSP_CONTROLLER_V2;
+
+		if (cdns->dr_mode != USB_DR_MODE_HOST &&
+		    cdns->dr_mode != USB_DR_MODE_PERIPHERAL) {
+			dev_err(cdns->dev, "Incorrect dr_mode\n");
+			return -EINVAL;
+		}
+
+		return 0;
+	}
+
 	regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);
@@ -492,6 +526,9 @@ int cdns_drd_init(struct cdns *cdns)
 
 int cdns_drd_exit(struct cdns *cdns)
 {
+	if (cdns->no_drd)
+		return 0;
+
 	cdns_otg_disable_irq(cdns);
 
 	return 0;
@@ -500,6 +537,9 @@ int cdns_drd_exit(struct cdns *cdns)
 /* Indicate the cdns3 core was power lost before */
 bool cdns_power_is_lost(struct cdns *cdns)
 {
+	if (cdns->no_drd)
+		return false;
+
 	if (cdns->version == CDNS3_CONTROLLER_V0) {
 		if (!(readl(&cdns->otg_v0_regs->simulate) & BIT(0)))
 			return true;

-- 
2.43.0

Re: [PATCH v5 1/2] dt-bindings: usb: cdns3: Add no_drd property

[Rob Herring (Arm)]

On Wed, 13 May 2026 10:41:21 +0200, Pawel Laszczak wrote:
> Introduce a new boolean property 'no_drd' for Cadence USBSS/USBSSP
> controllers to support hardware configurations where the Dual-Role
> Device (DRD) register block is missing or inaccessible.
> 
> When 'no_drd' is present:
> - The 'otg' register and interrupt resources are not required.
> - The 'reg' and 'interrupts' properties are restricted to 2 items
>   (host and device).
> - 'dr_mode' must be explicitly set to either 'host' or 'peripheral'.
> 
> When 'no_drd' is absent, the binding maintains backward compatibility
> by requiring all 3 resource sets (otg, host, dev).
> 
> To achieve this, the schema is updated with an if-then-else logic
> and 'reg-names'/'interrupt-names' use enums to allow flexible
> ordering during validation.
> 
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> v5:
> - Implemented strict conditional validation using if-then-else logic.
> - Enforced 2 register/interrupt items and required 'dr_mode'
>   (host or peripheral) when 'no_drd' is present.
> - Enforced the standard 3 register/interrupt items (otg, host, dev)
>   when 'no_drd' is absent to ensure backward compatibility.
> - Updated 'reg-names' and 'interrupt-names' to use enums in the main
>   properties section to support flexible resource ordering during
>   validation.
> ---
> ---
>  .../devicetree/bindings/usb/cdns,usb3.yaml         | 67 +++++++++++++++++++---
>  1 file changed, 58 insertions(+), 9 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.example.dtb: usb@5b110000 (fsl,imx8qm-usb3): usb@5b120000:interrupt-names: ['host', 'peripheral', 'otg', 'wakeup'] is too long
	from schema $id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.example.dtb: usb@5b120000 (cdns,usb3): interrupt-names: ['host', 'peripheral', 'otg', 'wakeup'] is too long
	from schema $id: http://devicetree.org/schemas/usb/cdns,usb3.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260513-b4-no_drd_config-v5-1-1c633a4b9a29@cadence.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.