From: "Yanli Yang" <yanli.yang@bedmex.com>
To: <linux-wireless@vger.kernel.org>
Cc: "Johannes Berg" <johannes@sipsolutions.net>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"Zhirun Liu" <zhirunliu@aicsemi.com>,
"Dijia Xu" <dijiaxu@aicsemi.com>,
"Chunqiu Liu" <chunqiuliu@aicsemi.com>,
"Liheng Wei" <liheng.wei@bedmex.com>, <yanli.yang@bedmex.com>
Subject: [PATCH wireless-next v5 1/4] dt-bindings: net: wireless: Add AIC8800D80 SDIO Wi-Fi
Date: Mon, 16 Nov 2026 15:23:22 +0800 [thread overview]
Message-ID: <179481380235.4.9476425206200425967@bedmex.com> (raw)
In-Reply-To: <179481380235.4.7388336477392853157@bedmex.com>
From: Zhirun Liu <zhirunliu@aicsemi.com>
Document the SDIO function used by AIC8800D80 and AIC8800D80N Wi-Fi
and register the aicsemi vendor prefix.
Describe the shared compatible, function number and optional host-wakeup
interrupt and device-wakeup GPIO. Chip selection uses the SDIO vendor
and device IDs. Power supplies and enable sequencing are described on
the MMC host through vmmc-supply and mmc-pwrseq.
Include an example for an SDIO function with both wake-up lines.
Signed-off-by: Chunqiu Liu <chunqiuliu@aicsemi.com>
Signed-off-by: Zhirun Liu <zhirunliu@aicsemi.com>
Signed-off-by: Yanli Yang <yanli.yang@bedmex.com>
---
.../net/wireless/aicsemi,aic8800d80-fmac.yaml | 78 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/aicsemi,aic8800d80-fmac.yaml
diff --git a/Documentation/devicetree/bindings/net/wireless/aicsemi,aic8800d80-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/aicsemi,aic8800d80-fmac.yaml
new file mode 100644
index 000000000000..f9ad3cd6e07c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/aicsemi,aic8800d80-fmac.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/aicsemi,aic8800d80-fmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AICSemi AIC8800D80 and AIC8800D80N SDIO Wi-Fi
+
+maintainers:
+ - Zhirun Liu <zhirunliu@aicsemi.com>
+ - Dijia Xu <dijiaxu@aicsemi.com>
+ - Chunqiu Liu <chunqiuliu@aicsemi.com>
+
+description:
+ The AIC8800D80 and AIC8800D80N are Wi-Fi and Bluetooth combo chips.
+ Wi-Fi is attached over SDIO and the chip variant is identified through
+ the SDIO vendor and device IDs. Both chips use the aicsemi,aic8800d80-fmac
+ compatible and the same device tree properties defined here.
+ The node describes SDIO function 1 and its optional out-of-band wake-up
+ lines, and is a child of the MMC host controller node. The chip supply
+ and enable line are described on the MMC host controller through
+ vmmc-supply and mmc-pwrseq.
+
+allOf:
+ - $ref: ieee80211.yaml#
+
+properties:
+ compatible:
+ const: aicsemi,aic8800d80-fmac
+
+ reg:
+ description: SDIO function number of the Wi-Fi function
+ const: 1
+
+ interrupts:
+ maxItems: 1
+ description:
+ Interrupt connected to the WIFI_WAKE_HOST pin of the chip, raised by
+ the chip when it has data for a sleeping host and used to wake up the
+ host from system suspend.
+
+ interrupt-names:
+ items:
+ - const: host-wakeup
+
+ device-wakeup-gpios:
+ maxItems: 1
+ description:
+ GPIO connected to the HOST_WAKE_WIFI pin of the chip, asserted while
+ the host needs the chip awake.
+
+required:
+ - compatible
+ - reg
+
+dependencies:
+ interrupt-names: [ interrupts ]
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ mmc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "aicsemi,aic8800d80-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 539aa1c89ce7..e7c849197dd3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -76,6 +76,8 @@ patternProperties:
description: Aeroflex Gaisler AB
"^aesop,.*":
description: AESOP Embedded Forum
+ "^aicsemi,.*":
+ description: AIC Semiconductor Co., Ltd.
"^airoha,.*":
description: Airoha
"^al,.*":
next prev parent reply other threads:[~2026-11-16 7:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 7:23 [PATCH wireless-next v5 0/4] wifi: aic: Add AIC8800D80 and D80N SDIO FullMAC driver Yanli Yang
2026-11-16 7:23 ` [PATCH wireless-next v5 2/4] wifi: aic: Add firmware protocol and SDIO chip support Yanli Yang
2026-11-16 7:23 ` [PATCH wireless-next v5 3/4] wifi: aic: Add the AIC8800D80 and D80N FullMAC driver Yanli Yang
2026-11-16 7:23 ` Yanli Yang [this message]
2026-11-16 7:35 ` [PATCH wireless-next v5 1/4] dt-bindings: net: wireless: Add AIC8800D80 SDIO Wi-Fi sashiko-bot
2026-11-16 7:23 ` [PATCH wireless-next v5 4/4] wifi: aic: Integrate the AIC8800 SDIO driver Yanli Yang
2026-11-16 7:48 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=179481380235.4.9476425206200425967@bedmex.com \
--to=yanli.yang@bedmex.com \
--cc=chunqiuliu@aicsemi.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dijiaxu@aicsemi.com \
--cc=johannes@sipsolutions.net \
--cc=krzk+dt@kernel.org \
--cc=liheng.wei@bedmex.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=robh@kernel.org \
--cc=zhirunliu@aicsemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox