Re: [PATCH V5 3/3] hwmon: pwm-fan: Add RPM support via external interrupt

[Robin Murphy <robin.murphy@arm.com>]

On 12/04/2019 14:50, Guenter Roeck wrote:
> On 4/12/19 4:50 AM, Robin Murphy wrote:
>> On 12/04/2019 12:07, Stefan Wahren wrote:
>>> On 11.04.19 18:57, Guenter Roeck wrote:
>>>> On Thu, Apr 11, 2019 at 03:30:11PM +0200, Stefan Wahren wrote:
>>>>> -ATTRIBUTE_GROUPS(pwm_fan);
>>>>> +static umode_t pwm_fan_attrs_visible(struct kobject *kobj, struct 
>>>>> attribute *a,
>>>>> +                     int n)
>>>>> +{
>>>>> +    struct device *dev = container_of(kobj, struct device, kobj);
>>>>> +    struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
>>>>> +    struct device_attribute *devattr;
>>>>> +
>>>>> +    /* Hide fan_input in case no interrupt is available  */
>>>>> +    devattr = container_of(a, struct device_attribute, attr);
>>>> Field day for static analyzers - devattr is no longer used.
>>>> No need to resend. I'll let the series rest for a couple of days
>>>> and then apply to hwmon-next (after removing devattr) unless there are
>>>> additional comments.
>>>>
>>> Thank you
>>
>> FWIW you can have a
>>
>> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
>>
>> for the whole series. The only minor comment that springs to mind
>> isn't actually specific to this patch, so is probably best made as
>> the follow-up below.
>>
>> Robin.
>>
> 
> Any chance you can send the patch below as separate patch ? I track patches
> using patchwork, and attachments don't show up there.

Sure, can do - would you like an explicit R-b on #1 and #2 here for 
patchwork to pick up as well?

Robin.

> 
> Thanks,
> Guenter
> 
>> ----->8-----
>> From: Robin Murphy <robin.murphy@arm.com>
>> Subject: [PATCH] hwmon: pwm-fan: Report probe errors consistently
>>
>> Printing the error code for a failure provides a head-start for
>> debugging, since it's often sufficient to pinpoint the origin of the
>> failure. We already do this for some probe-failure messages, so let's
>> make the rest of them consistent.
>>
>> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
>> ---
>>   drivers/hwmon/pwm-fan.c | 13 ++++++++-----
>>   1 file changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
>> index 8c4c5eefd4ca..556db4bef743 100644
>> --- a/drivers/hwmon/pwm-fan.c
>> +++ b/drivers/hwmon/pwm-fan.c
>> @@ -330,7 +330,7 @@ static int pwm_fan_probe(struct platform_device 
>> *pdev)
>>
>>       ret = pwm_apply_state(ctx->pwm, &state);
>>       if (ret) {
>> -        dev_err(&pdev->dev, "Failed to configure PWM\n");
>> +        dev_err(&pdev->dev, "Failed to configure PWM: %d\n", ret);
>>           goto err_reg_disable;
>>       }
>>
>> @@ -348,7 +348,8 @@ static int pwm_fan_probe(struct platform_device 
>> *pdev)
>>           ret = devm_request_irq(&pdev->dev, ctx->irq, pulse_handler, 0,
>>                          pdev->name, ctx);
>>           if (ret) {
>> -            dev_err(&pdev->dev, "Can't get interrupt working.\n");
>> +            dev_err(&pdev->dev,
>> +                "Failed to request interrupt: %d\n", ret);
>>               goto err_pwm_disable;
>>           }
>>           ctx->sample_start = ktime_get();
>> @@ -358,8 +359,9 @@ static int pwm_fan_probe(struct platform_device 
>> *pdev)
>>       hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, 
>> "pwmfan",
>>                                  ctx, pwm_fan_groups);
>>       if (IS_ERR(hwmon)) {
>> -        dev_err(&pdev->dev, "Failed to register hwmon device\n");
>>           ret = PTR_ERR(hwmon);
>> +        dev_err(&pdev->dev,
>> +            "Failed to register hwmon device: %d\n", ret);
>>           goto err_del_timer;
>>       }
>>
>> @@ -373,9 +375,10 @@ static int pwm_fan_probe(struct platform_device 
>> *pdev)
>>                                 "pwm-fan", ctx,
>>                                 &pwm_fan_cooling_ops);
>>           if (IS_ERR(cdev)) {
>> -            dev_err(&pdev->dev,
>> -                "Failed to register pwm-fan as cooling device");
>>               ret = PTR_ERR(cdev);
>> +            dev_err(&pdev->dev,
>> +                "Failed to register pwm-fan as cooling device: %d\n",
>> +                ret);
>>               goto err_del_timer;
>>           }
>>           ctx->cdev = cdev;
>>
>