Re: [PATCH V5 0/3] hwmon: pwm-fan: Add RPM support

[Guenter Roeck <linux@roeck-us.net>]

On 4/11/19 6:30 AM, Stefan Wahren wrote:
> Contrary to the gpio-fan the pwm-fan driver isn't easy to setup
> with pwmconfig/fancontrol because of the missing hwmon sysfs entry
> for actual revolutions per minute. This series adds this feature.
> 

Series applied to hwmon-next.

Thanks,
Guenter

> Changes in V5:
> - address Guenter's and Robin's comments:
>    - use of_property_read_u32 to get pulses-per-revolution
>    - call platform_get_irq ealier to avoid glitches on the regulator
>    - simplify pwm_fan_attrs_visible
> 
> Changes in V4:
> - remove copy & paste artifact in dt-binding example
> - switch to u64 for rpm calculation
> - drop overflow handling and init atomic
> - handle 0 not as valid irq
> - reduce range of pulses_per_revolution
> - handle probe defer of platform_get_irq
> - delete timer properly in bail-out path
> 
> Changes in V3:
> - rename property interrupt-ratio to pulses-per-revolution
>    to avoid confusion with interrupt binding
> - handle error case pulses-per-revolution = 0
> - bail out properly in case we are unable to request the irq
> 
> Changes in V2:
> - address Guenter's comments:
>    - improve description of interrupts
>    - use atomic_t to avoid races of the pulse counter
>    - measure sample time to make rpm more reliable under load
>    - make sysfs entry fan1_input conditional
> - add dt-property to define interrupts per fan revolution
> - example for fan with RPM support
> 
> Stefan Wahren (3):
>    dt-bindings: hwmon: Add tachometer interrupt to pwm-fan
>    Documentation: pwm-fan: Add description for RPM support
>    hwmon: pwm-fan: Add RPM support via external interrupt
> 
>   .../devicetree/bindings/hwmon/pwm-fan.txt          |  21 +++-
>   Documentation/hwmon/pwm-fan                        |   3 +
>   drivers/hwmon/pwm-fan.c                            | 107 ++++++++++++++++++++-
>   3 files changed, 126 insertions(+), 5 deletions(-)
>