[PATCH v2] rtc/cmos: add OF bindings

[PATCH v2] rtc/cmos: add OF bindings

[Sebastian Andrzej Siewior]

This allows to load the OF driver based informations from the device
tree. Systems without BIOS may need to perform some initialization.
PowerPC creates a PNP device from the OF information and performs this
kind of initialization in their private PCI quirk. This looks more
generic.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
CC: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Signed-off-by: Dirk Brandewie <dirk.brandewie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
v1 - v2:
        - changed ctrl_reg & freq_reg to changed ctrl-reg & freq-reg as
          recommended by Benh
        - added missing get_rtc_time()
        - set the default day to 1
        - added binding info

 Documentation/powerpc/dts-bindings/rtc-cmos.txt |   28 ++++++
 drivers/rtc/rtc-cmos.c                          |  108 +++++++++++++++++++++++
 2 files changed, 136 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt

diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
new file mode 100644
index 0000000..7382989
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
@@ -0,0 +1,28 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "motorola,mc146818"
+  - reg : should contain registers location and length.
+
+Optional properties:
+  - interrupts : should contain interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - ctrl-reg : Contains the initial value of the control register also
+    called "Register B".
+  - freq-reg : Contains the initial value of the frequency register also
+    called "Regsiter A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+	rtc@70 {
+	         compatible = "motorola,mc146818";
+	         interrupts = <8 3>;
+	         interrupt-parent = <&ioapic1>;
+	         ctrl-reg = <2>;
+	         freq-reg = <0x26>;
+	         reg = <1 0x70 2>;
+	 };
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 5856167..e516a4b 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -36,6 +36,9 @@
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -1120,6 +1123,98 @@ static struct pnp_driver cmos_pnp_driver = {
 };
 
 #endif	/* CONFIG_PNP */
+#ifdef CONFIG_OF
+static bool of_driver_registered;
+
+static const struct of_device_id of_cmos_match[] = {
+	{
+		.compatible = "motorola,mc146818",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cmos_match);
+
+static int __init of_cmos_probe(struct platform_device *dev,
+		const struct of_device_id *match)
+{
+	struct resource res;
+	struct device_node *node = dev->dev.of_node;
+	struct rtc_time time;
+	int ret;
+	int virq;
+	const __be32 *val;
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return ret;
+
+	virq = irq_of_parse_and_map(node, 0);
+
+	val = of_get_property(node, "ctrl-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
+
+	val = of_get_property(node, "freq-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
+
+	get_rtc_time(&time);
+	ret = rtc_valid_tm(&time);
+	if (ret) {
+		struct rtc_time def_time = {
+			.tm_year = 1,
+			.tm_mday = 1,
+		};
+		set_rtc_time(&def_time);
+	}
+
+	return cmos_do_probe(&dev->dev, &res, virq);
+}
+
+static int __exit of_cmos_remove(struct platform_device *dev)
+{
+	cmos_do_remove(&dev->dev);
+	return 0;
+}
+
+static int of_cmos_shutdown(struct platform_device *dev)
+{
+	if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&dev->dev))
+		return 0;
+
+	cmos_do_shutdown();
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+static int of_cmos_suspend(struct platform_device *dev, pm_message_t mesg)
+{
+	return cmos_suspend(&dev->dev, mesg);
+}
+
+static int of_cmos_resume(struct platform_device *dev)
+{
+	return cmos_resume(&dev->dev);
+}
+#else
+#define	of_cmos_suspend NULL
+#define	of_cmos_resume	NULL
+#endif
+
+static struct of_platform_driver cmos_of_driver_probe = {
+	.driver = {
+		.name = "motorola-mc146818",
+		.owner = THIS_MODULE,
+		.of_match_table = of_cmos_match,
+	},
+	.probe          = of_cmos_probe,
+	.remove         = of_cmos_remove,
+	.shutdown	= of_cmos_shutdown,
+	.suspend	= of_cmos_suspend,
+	.resume		= of_cmos_resume,
+};
+#endif
+
 
 /*----------------------------------------------------------------*/
 
@@ -1176,6 +1271,11 @@ static int __init cmos_init(void)
 	if (retval == 0)
 		pnp_driver_registered = true;
 #endif
+#ifdef CONFIG_OF
+	retval = of_register_platform_driver(&cmos_of_driver_probe);
+	if (retval == 0)
+		of_driver_registered = true;
+#endif
 
 	if (!cmos_rtc.dev) {
 		retval = platform_driver_probe(&cmos_platform_driver,
@@ -1191,6 +1291,10 @@ static int __init cmos_init(void)
 	if (pnp_driver_registered)
 		pnp_unregister_driver(&cmos_pnp_driver);
 #endif
+#ifdef CONFIG_OF
+	if (of_driver_registered)
+		of_unregister_platform_driver(&cmos_of_driver_probe);
+#endif
 	return retval;
 }
 module_init(cmos_init);
@@ -1201,6 +1305,10 @@ static void __exit cmos_exit(void)
 	if (pnp_driver_registered)
 		pnp_unregister_driver(&cmos_pnp_driver);
 #endif
+#ifdef CONFIG_OF
+	if (of_driver_registered)
+		of_unregister_platform_driver(&cmos_of_driver_probe);
+#endif
 	if (platform_driver_registered)
 		platform_driver_unregister(&cmos_platform_driver);
 }
-- 
1.7.3.2

Re: [PATCH v2] rtc/cmos: add OF bindings

[David Gibson]

On Wed, Dec 01, 2010 at 11:17:56AM +0100, Sebastian Andrzej Siewior wrote:
> This allows to load the OF driver based informations from the device
> tree. Systems without BIOS may need to perform some initialization.
> PowerPC creates a PNP device from the OF information and performs this
> kind of initialization in their private PCI quirk. This looks more
> generic.

Nice.  We should also get this up on Grant's new wiki for device tree
bindings at:
	http://www.devicetree.org/
Longer term, that will be a better place to collect bindings than
inside the kernel documentation.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH v2] rtc/cmos: add OF bindings

[Grant Likely]

On Wed, Dec 1, 2010 at 2:17 AM, Sebastian Andrzej Siewior
<bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> wrote:
> This allows to load the OF driver based informations from the device
> tree. Systems without BIOS may need to perform some initialization.
> PowerPC creates a PNP device from the OF information and performs this
> kind of initialization in their private PCI quirk. This looks more
> generic.
>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
> CC: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> Signed-off-by: Dirk Brandewie <dirk.brandewie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---

Hi Sebastian.

> +static struct of_platform_driver cmos_of_driver_probe = {

of_platform_drivers are deprecated and being removed.  Regular
platform_drivers can be assigned an of_match_table and the
platform_bus_type will use it to match drivers to devices.  Instead of
doing it this way, you can look for a device tree node in the existing
platform_drivers probe hook and if it exists then fetch the additional
data there.

g.

[PATCH v3] rtc/cmos: add OF bindings

[Sebastian Andrzej Siewior]

This allows to load the OF driver based informations from the device
tree. Systems without BIOS may need to perform some initialization.
PowerPC creates a PNP device from the OF information and performs this
kind of initialization in their private PCI quirk. This looks more
generic.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
CC: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
---
 Documentation/powerpc/dts-bindings/rtc-cmos.txt |   28 ++++++++++++++++
 drivers/rtc/rtc-cmos.c                          |   39 +++++++++++++++++++++++
 2 files changed, 67 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt

diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
new file mode 100644
index 0000000..7382989
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
@@ -0,0 +1,28 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "motorola,mc146818"
+  - reg : should contain registers location and length.
+
+Optional properties:
+  - interrupts : should contain interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - ctrl-reg : Contains the initial value of the control register also
+    called "Register B".
+  - freq-reg : Contains the initial value of the frequency register also
+    called "Regsiter A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+	rtc@70 {
+	         compatible = "motorola,mc146818";
+	         interrupts = <8 3>;
+	         interrupt-parent = <&ioapic1>;
+	         ctrl-reg = <2>;
+	         freq-reg = <0x26>;
+	         reg = <1 0x70 2>;
+	 };
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 5856167..dbb95b3 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -36,6 +36,8 @@
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -1121,6 +1123,15 @@ static struct pnp_driver cmos_pnp_driver = {
 
 #endif	/* CONFIG_PNP */
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_cmos_match[] = {
+	{
+		.compatible = "motorola,mc146818",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cmos_match);
+#endif
 /*----------------------------------------------------------------*/
 
 /* Platform setup should have set up an RTC device, when PNP is
@@ -1129,6 +1140,31 @@ static struct pnp_driver cmos_pnp_driver = {
 
 static int __init cmos_platform_probe(struct platform_device *pdev)
 {
+	if (pdev->dev.of_node) {
+		struct device_node *node = pdev->dev.of_node;
+		struct rtc_time time;
+		int ret;
+		const __be32 *val;
+
+		val = of_get_property(node, "ctrl-reg", NULL);
+		if (val)
+			CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
+
+		val = of_get_property(node, "freq-reg", NULL);
+		if (val)
+			CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
+
+		get_rtc_time(&time);
+		ret = rtc_valid_tm(&time);
+		if (ret) {
+			struct rtc_time def_time = {
+				.tm_year = 1,
+				.tm_mday = 1,
+			};
+			set_rtc_time(&def_time);
+		}
+	}
+
 	cmos_wake_setup(&pdev->dev);
 	return cmos_do_probe(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_IO, 0),
@@ -1157,6 +1193,9 @@ static struct platform_driver cmos_platform_driver = {
 	.shutdown	= cmos_platform_shutdown,
 	.driver = {
 		.name		= (char *) driver_name,
+#if defined(CONFIG_OF)
+		.of_match_table = of_cmos_match,
+#endif
 		.suspend	= cmos_suspend,
 		.resume		= cmos_resume,
 	}
-- 
1.7.3.2

[PATCH] x86/rtc: don't register rtc if we have an OF node for it

[Sebastian Andrzej Siewior]

or the rtc driver will probe for two devices: the static platform device
the OF device.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
---
 arch/x86/kernel/rtc.c |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 1cfbbfc..382c6cb 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -6,6 +6,7 @@
 #include <linux/acpi.h>
 #include <linux/bcd.h>
 #include <linux/pnp.h>
+#include <linux/of.h>
 
 #include <asm/vsyscall.h>
 #include <asm/x86_init.h>
@@ -218,6 +219,25 @@ static struct platform_device rtc_device = {
 	.num_resources	= ARRAY_SIZE(rtc_resources),
 };
 
+#ifdef CONFIG_OF
+static __init int have_rtc_of_node(void)
+{
+	struct device_node *n;
+
+	n = of_find_compatible_node(NULL, NULL, "motorola,mc146818");
+	if (n) {
+		of_node_put(n);
+		return 1;
+	}
+	return 0;
+}
+#else
+static inline int have_rtc_of_node(void)
+{
+	return 0;
+}
+#endif
+
 static __init int add_rtc_cmos(void)
 {
 #ifdef CONFIG_PNP
@@ -237,6 +257,9 @@ static __init int add_rtc_cmos(void)
 	}
 #endif
 
+	if (have_rtc_of_node())
+		return 0;
+
 	platform_device_register(&rtc_device);
 	dev_info(&rtc_device.dev,
 		 "registered platform RTC device (no PNP device found)\n");
-- 
1.7.3.2

[PATCH 14/15] rtc/cmos: add OF bindings

[Sebastian Andrzej Siewior]

This allows to load the OF driver based informations from the device
tree. Systems without BIOS may need to perform some initialization.
PowerPC creates a PNP device from the OF information and performs this
kind of initialization in their private PCI quirk. This looks more
generic.

Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Signed-off-by: Dirk Brandewie <dirk.brandewie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/powerpc/dts-bindings/rtc-cmos.txt |   28 ++++++++++++++++
 drivers/rtc/rtc-cmos.c                          |   40 +++++++++++++++++++++++
 2 files changed, 68 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt

diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
new file mode 100644
index 0000000..7382989
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
@@ -0,0 +1,28 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "motorola,mc146818"
+  - reg : should contain registers location and length.
+
+Optional properties:
+  - interrupts : should contain interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - ctrl-reg : Contains the initial value of the control register also
+    called "Register B".
+  - freq-reg : Contains the initial value of the frequency register also
+    called "Regsiter A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+	rtc@70 {
+	         compatible = "motorola,mc146818";
+	         interrupts = <8 3>;
+	         interrupt-parent = <&ioapic1>;
+	         ctrl-reg = <2>;
+	         freq-reg = <0x26>;
+	         reg = <1 0x70 2>;
+	 };
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 5856167..8cf0049 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -36,6 +36,8 @@
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -1121,6 +1123,15 @@ static struct pnp_driver cmos_pnp_driver = {
 
 #endif	/* CONFIG_PNP */
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_cmos_match[] = {
+	{
+		.compatible = "motorola,mc146818",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cmos_match);
+#endif
 /*----------------------------------------------------------------*/
 
 /* Platform setup should have set up an RTC device, when PNP is
@@ -1129,6 +1140,32 @@ static struct pnp_driver cmos_pnp_driver = {
 
 static int __init cmos_platform_probe(struct platform_device *pdev)
 {
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		struct device_node *node = pdev->dev.of_node;
+		struct rtc_time time;
+		int ret;
+		const __be32 *val;
+
+		val = of_get_property(node, "ctrl-reg", NULL);
+		if (val)
+			CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
+
+		val = of_get_property(node, "freq-reg", NULL);
+		if (val)
+			CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
+
+		get_rtc_time(&time);
+		ret = rtc_valid_tm(&time);
+		if (ret) {
+			struct rtc_time def_time = {
+				.tm_year = 1,
+				.tm_mday = 1,
+			};
+			set_rtc_time(&def_time);
+		}
+	}
+#endif
 	cmos_wake_setup(&pdev->dev);
 	return cmos_do_probe(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_IO, 0),
@@ -1157,6 +1194,9 @@ static struct platform_driver cmos_platform_driver = {
 	.shutdown	= cmos_platform_shutdown,
 	.driver = {
 		.name		= (char *) driver_name,
+#if defined(CONFIG_OF)
+		.of_match_table = of_cmos_match,
+#endif
 		.suspend	= cmos_suspend,
 		.resume		= cmos_resume,
 	}
-- 
1.7.3.2

Re: [PATCH 14/15] rtc/cmos: add OF bindings

[Grant Likely]

On Fri, Dec 17, 2010 at 04:33:52PM +0100, Sebastian Andrzej Siewior wrote:
> This allows to load the OF driver based informations from the device
> tree. Systems without BIOS may need to perform some initialization.
> PowerPC creates a PNP device from the OF information and performs this
> kind of initialization in their private PCI quirk. This looks more
> generic.
> 
> Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
> Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
> Signed-off-by: Dirk Brandewie <dirk.brandewie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  Documentation/powerpc/dts-bindings/rtc-cmos.txt |   28 ++++++++++++++++
>  drivers/rtc/rtc-cmos.c                          |   40 +++++++++++++++++++++++
>  2 files changed, 68 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt
> 
> diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
> new file mode 100644
> index 0000000..7382989
> --- /dev/null
> +++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
> @@ -0,0 +1,28 @@
> + Motorola mc146818 compatible RTC
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Required properties:
> +  - compatible : "motorola,mc146818"
> +  - reg : should contain registers location and length.
> +
> +Optional properties:
> +  - interrupts : should contain interrupt.
> +  - interrupt-parent : interrupt source phandle.
> +  - ctrl-reg : Contains the initial value of the control register also
> +    called "Register B".
> +  - freq-reg : Contains the initial value of the frequency register also
> +    called "Regsiter A".
> +
> +"Register A" and "B" are usually initialized by the firmware (BIOS for
> +instance). If this is not done, it can be performed by the driver.
> +
> +ISA Example:
> +
> +	rtc@70 {
> +	         compatible = "motorola,mc146818";
> +	         interrupts = <8 3>;
> +	         interrupt-parent = <&ioapic1>;
> +	         ctrl-reg = <2>;
> +	         freq-reg = <0x26>;
> +	         reg = <1 0x70 2>;
> +	 };
> diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
> index 5856167..8cf0049 100644
> --- a/drivers/rtc/rtc-cmos.c
> +++ b/drivers/rtc/rtc-cmos.c
> @@ -36,6 +36,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/mod_devicetable.h>
>  #include <linux/log2.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
>  
>  /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
>  #include <asm-generic/rtc.h>
> @@ -1121,6 +1123,15 @@ static struct pnp_driver cmos_pnp_driver = {
>  
>  #endif	/* CONFIG_PNP */
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id of_cmos_match[] = {
> +	{
> +		.compatible = "motorola,mc146818",
> +	},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, of_cmos_match);
> +#endif
>  /*----------------------------------------------------------------*/
>  
>  /* Platform setup should have set up an RTC device, when PNP is
> @@ -1129,6 +1140,32 @@ static struct pnp_driver cmos_pnp_driver = {
>  
>  static int __init cmos_platform_probe(struct platform_device *pdev)
>  {
> +#ifdef CONFIG_OF
> +	if (pdev->dev.of_node) {
> +		struct device_node *node = pdev->dev.of_node;
> +		struct rtc_time time;
> +		int ret;
> +		const __be32 *val;
> +
> +		val = of_get_property(node, "ctrl-reg", NULL);
> +		if (val)
> +			CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
> +
> +		val = of_get_property(node, "freq-reg", NULL);
> +		if (val)
> +			CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
> +
> +		get_rtc_time(&time);
> +		ret = rtc_valid_tm(&time);
> +		if (ret) {
> +			struct rtc_time def_time = {
> +				.tm_year = 1,
> +				.tm_mday = 1,
> +			};
> +			set_rtc_time(&def_time);
> +		}
> +	}
> +#endif

It's usually cleaner to break the of-specific probe stuff into a
separate function that can be #ifdef'ed out as a whole instead of
having #ifdef blocks inside the probe functions.  Aside from that this
patch looks good to me.

>  	cmos_wake_setup(&pdev->dev);
>  	return cmos_do_probe(&pdev->dev,
>  			platform_get_resource(pdev, IORESOURCE_IO, 0),
> @@ -1157,6 +1194,9 @@ static struct platform_driver cmos_platform_driver = {
>  	.shutdown	= cmos_platform_shutdown,
>  	.driver = {
>  		.name		= (char *) driver_name,
> +#if defined(CONFIG_OF)
> +		.of_match_table = of_cmos_match,
> +#endif
>  		.suspend	= cmos_suspend,
>  		.resume		= cmos_resume,
>  	}
> -- 
> 1.7.3.2
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss

[PATCH v2] rtc/cmos: add OF bindings

[Sebastian Andrzej Siewior]

This allows to load the OF driver based informations from the device
tree. Systems without BIOS may need to perform some initialization.
PowerPC creates a PNP device from the OF information and performs this
kind of initialization in their private PCI quirk. This looks more
generic.

Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Signed-off-by: Dirk Brandewie <dirk.brandewie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---

* Grant Likely | 2011-01-11 17:04:42 [-0700]:

>It's usually cleaner to break the of-specific probe stuff into a
>separate function that can be #ifdef'ed out as a whole instead of
>having #ifdef blocks inside the probe functions.  Aside from that this
>patch looks good to me.

Done.

 Documentation/powerpc/dts-bindings/rtc-cmos.txt |   28 ++++++++++++++
 drivers/rtc/rtc-cmos.c                          |   46 +++++++++++++++++++++++
 2 files changed, 74 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt

diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
new file mode 100644
index 0000000..7382989
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
@@ -0,0 +1,28 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "motorola,mc146818"
+  - reg : should contain registers location and length.
+
+Optional properties:
+  - interrupts : should contain interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - ctrl-reg : Contains the initial value of the control register also
+    called "Register B".
+  - freq-reg : Contains the initial value of the frequency register also
+    called "Regsiter A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+	rtc@70 {
+	         compatible = "motorola,mc146818";
+	         interrupts = <8 3>;
+	         interrupt-parent = <&ioapic1>;
+	         ctrl-reg = <2>;
+	         freq-reg = <0x26>;
+	         reg = <1 0x70 2>;
+	 };
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 5856167..95a08dd 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -36,6 +36,8 @@
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -1121,6 +1123,46 @@ static struct pnp_driver cmos_pnp_driver = {
 
 #endif	/* CONFIG_PNP */
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_cmos_match[] = {
+	{
+		.compatible = "motorola,mc146818",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cmos_match);
+
+static __init void cmos_of_init(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct rtc_time time;
+	int ret;
+	const __be32 *val;
+
+	if (!node)
+		return;
+
+	val = of_get_property(node, "ctrl-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
+
+	val = of_get_property(node, "freq-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
+
+	get_rtc_time(&time);
+	ret = rtc_valid_tm(&time);
+	if (ret) {
+		struct rtc_time def_time = {
+			.tm_year = 1,
+			.tm_mday = 1,
+		};
+		set_rtc_time(&def_time);
+	}
+}
+#else
+static inline void cmos_of_init(struct platform_device *pdev) {}
+#endif
 /*----------------------------------------------------------------*/
 
 /* Platform setup should have set up an RTC device, when PNP is
@@ -1129,6 +1171,7 @@ static struct pnp_driver cmos_pnp_driver = {
 
 static int __init cmos_platform_probe(struct platform_device *pdev)
 {
+	cmos_of_init(pdev);
 	cmos_wake_setup(&pdev->dev);
 	return cmos_do_probe(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_IO, 0),
@@ -1157,6 +1200,9 @@ static struct platform_driver cmos_platform_driver = {
 	.shutdown	= cmos_platform_shutdown,
 	.driver = {
 		.name		= (char *) driver_name,
+#if defined(CONFIG_OF)
+		.of_match_table = of_cmos_match,
+#endif
 		.suspend	= cmos_suspend,
 		.resume		= cmos_resume,
 	}
-- 
1.7.3.2



Sebastian