* Re: [PATCH v2] hwmon: (ads1015) Add devicetree documentation
[not found] ` <1299154757-13682-1-git-send-email-eibach-dJ+jgKLZIg4@public.gmane.org>
@ 2011-03-03 12:22 ` Jean Delvare
2011-03-03 17:53 ` Grant Likely
1 sibling, 0 replies; 3+ messages in thread
From: Jean Delvare @ 2011-03-03 12:22 UTC (permalink / raw)
To: Dirk Eibach
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
rdunlap-/UHa2rfvQTnk1uMJSBkQmQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-doc-u79uwXL29TY76Z2rM5mHXA
On Thu, 3 Mar 2011 13:19:17 +0100, Dirk Eibach wrote:
> Signed-off-by: Dirk Eibach <eibach-dJ+jgKLZIg4@public.gmane.org>
> ---
> Changes since v1:
> - removed sysfs from description
> - explain channels
>
> Documentation/devicetree/bindings/i2c/ads1015.txt | 29 +++++++++++++++++++++
> 1 files changed, 29 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/ads1015.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/ads1015.txt b/Documentation/devicetree/bindings/i2c/ads1015.txt
> new file mode 100644
> index 0000000..0f30616
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/ads1015.txt
> @@ -0,0 +1,29 @@
> +ADS1015 (I2C)
> +
> +This device is a 12-bit A-D converter with 4 inputs.
> +
> +The inputs can be used single ended or in certain differential combinations.
> +
> +For configuration all possible combinations are mapped to 8 channels:
> +0: Voltage over AIN0 and AIN1.
> +1: Voltage over AIN0 and AIN3.
> +2: Voltage over AIN1 and AIN3.
> +3: Voltage over AIN2 and AIN3.
> +4: Voltage over AIN0 and GND.
> +5: Voltage over AIN1 and GND.
> +6: Voltage over AIN2 and GND.
> +7: Voltage over AIN3 and GND.
> +
> +Optional properties:
> +
> + - exported-channels : exported_channels is a bitmask that specifies which
> + channels should be accessable by the user.
"accessable" doesn't exist as an English word.
> +
> +Example:
> +ads1015@49 {
> + compatible = "ti,ads1015";
> + reg = <0x49>;
> + exported-channels = <0x14>;
> +};
> +
> +In this example only channel 2 and 4 would be accessable by the user.
Ditto.
--
Jean Delvare
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] hwmon: (ads1015) Add devicetree documentation
[not found] ` <1299154757-13682-1-git-send-email-eibach-dJ+jgKLZIg4@public.gmane.org>
2011-03-03 12:22 ` Jean Delvare
@ 2011-03-03 17:53 ` Grant Likely
1 sibling, 0 replies; 3+ messages in thread
From: Grant Likely @ 2011-03-03 17:53 UTC (permalink / raw)
To: Dirk Eibach
Cc: linux-doc-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
rdunlap-/UHa2rfvQTnk1uMJSBkQmQ, khali-PUYAD+kWke1g9hUCZPvPmw
On Thu, Mar 03, 2011 at 01:19:17PM +0100, Dirk Eibach wrote:
> Signed-off-by: Dirk Eibach <eibach-dJ+jgKLZIg4@public.gmane.org>
> ---
> Changes since v1:
> - removed sysfs from description
> - explain channels
>
> Documentation/devicetree/bindings/i2c/ads1015.txt | 29 +++++++++++++++++++++
> 1 files changed, 29 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/ads1015.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/ads1015.txt b/Documentation/devicetree/bindings/i2c/ads1015.txt
> new file mode 100644
> index 0000000..0f30616
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/ads1015.txt
While this device is on an i2c bus, it is a hwmon device. Similar to
hwmon drivers, the documentation makes more sense in
Documentation/devicetree/bindings/hwmon/ti-ads1015.txt
> @@ -0,0 +1,29 @@
> +ADS1015 (I2C)
> +
> +This device is a 12-bit A-D converter with 4 inputs.
> +
> +The inputs can be used single ended or in certain differential combinations.
> +
> +For configuration all possible combinations are mapped to 8 channels:
> +0: Voltage over AIN0 and AIN1.
> +1: Voltage over AIN0 and AIN3.
> +2: Voltage over AIN1 and AIN3.
> +3: Voltage over AIN2 and AIN3.
> +4: Voltage over AIN0 and GND.
> +5: Voltage over AIN1 and GND.
> +6: Voltage over AIN2 and GND.
> +7: Voltage over AIN3 and GND.
> +
Required properties:
- compatible : must be "ti,ads1015"
> +Optional properties:
> +
> + - exported-channels : exported_channels is a bitmask that specifies which
> + channels should be accessable by the user.
> +
> +Example:
> +ads1015@49 {
> + compatible = "ti,ads1015";
> + reg = <0x49>;
> + exported-channels = <0x14>;
> +};
> +
> +In this example only channel 2 and 4 would be accessable by the user.
> --
> 1.5.6.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 3+ messages in thread