* [PATCH 1/9] ARM: at91: add at91sam9260 DT support
[not found] <20120411153515.GK16641@game.jcrosoft.org>
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 2/9] arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support Jean-Christophe PLAGNIOL-VILLARD
` (7 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
The at91sam9260 and at91sam9g20 share most of the same IP.
So udpate the node property in the at91sam9g20 only.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
.../dts/{at91sam9g20.dtsi => at91sam9260.dtsi} | 8 +-
arch/arm/boot/dts/at91sam9g20.dtsi | 257 ++------------------
arch/arm/mach-at91/Makefile.boot | 1 +
3 files changed, 23 insertions(+), 243 deletions(-)
rename arch/arm/boot/dts/{at91sam9g20.dtsi => at91sam9260.dtsi} (96%)
rewrite arch/arm/boot/dts/at91sam9g20.dtsi (95%)
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
similarity index 96%
rename from arch/arm/boot/dts/at91sam9g20.dtsi
rename to arch/arm/boot/dts/at91sam9260.dtsi
index 799ad18..71c78d1 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
*
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
@@ -11,8 +11,8 @@
/include/ "skeleton.dtsi"
/ {
- model = "Atmel AT91SAM9G20 family SoC";
- compatible = "atmel,at91sam9g20";
+ model = "Atmel AT91SAM9260 family SoC";
+ compatible = "atmel,at91sam9260";
interrupt-parent = <&aic>;
aliases {
@@ -36,7 +36,7 @@
};
memory {
- reg = <0x20000000 0x08000000>;
+ reg = <0x20000000 0x04000000>;
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
dissimilarity index 95%
index 799ad18..0eb1a75 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -1,239 +1,18 @@
-/*
- * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
- *
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
- model = "Atmel AT91SAM9G20 family SoC";
- compatible = "atmel,at91sam9g20";
- interrupt-parent = <&aic>;
-
- aliases {
- serial0 = &dbgu;
- serial1 = &usart0;
- serial2 = &usart1;
- serial3 = &usart2;
- serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
- gpio0 = &pioA;
- gpio1 = &pioB;
- gpio2 = &pioC;
- tcb0 = &tcb0;
- tcb1 = &tcb1;
- };
- cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
- };
- };
-
- memory {
- reg = <0x20000000 0x08000000>;
- };
-
- ahb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- apb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
- compatible = "atmel,at91rm9200-aic";
- interrupt-controller;
- interrupt-parent;
- reg = <0xfffff000 0x200>;
- };
-
- ramc0: ramc@ffffea00 {
- compatible = "atmel,at91sam9260-sdramc";
- reg = <0xffffea00 0x200>;
- };
-
- pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
- reg = <0xfffffc00 0x100>;
- };
-
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
- };
-
- shdwc@fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- };
-
- pit: timer@fffffd30 {
- compatible = "atmel,at91sam9260-pit";
- reg = <0xfffffd30 0xf>;
- interrupts = <1 4>;
- };
-
- tcb0: timer@fffa0000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffa0000 0x100>;
- interrupts = <17 4 18 4 19 4>;
- };
-
- tcb1: timer@fffdc000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffdc000 0x100>;
- interrupts = <26 4 27 4 28 4>;
- };
-
- pioA: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioB: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <3 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioC: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
- status = "disabled";
- };
-
- usart0: serial@fffb0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb0000 0x200>;
- interrupts = <6 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart1: serial@fffb4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb4000 0x200>;
- interrupts = <7 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart2: serial@fffb8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb8000 0x200>;
- interrupts = <8 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart3: serial@fffd0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd0000 0x200>;
- interrupts = <23 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart4: serial@fffd4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd4000 0x200>;
- interrupts = <24 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart5: serial@fffd8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd8000 0x200>;
- interrupts = <25 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- macb0: ethernet@fffc4000 {
- compatible = "cdns,at32ap7000-macb", "cdns,macb";
- reg = <0xfffc4000 0x100>;
- interrupts = <21 4>;
- status = "disabled";
- };
-
- usb1: gadget@fffa4000 {
- compatible = "atmel,at91rm9200-udc";
- reg = <0xfffa4000 0x4000>;
- interrupts = <10 4>;
- status = "disabled";
- };
- };
-
- nand0: nand@40000000 {
- compatible = "atmel,at91rm9200-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x40000000 0x10000000
- 0xffffe800 0x200
- >;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- gpios = <&pioC 13 0
- &pioC 14 0
- 0
- >;
- status = "disabled";
- };
-
- usb0: ohci@00500000 {
- compatible = "atmel,at91rm9200-ohci", "usb-ohci";
- reg = <0x00500000 0x100000>;
- interrupts = <20 4>;
- status = "disabled";
- };
- };
-
- i2c@0 {
- compatible = "i2c-gpio";
- gpios = <&pioA 23 0 /* sda */
- &pioA 24 0 /* scl */
- >;
- i2c-gpio,sda-open-drain;
- i2c-gpio,scl-open-drain;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-};
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G20 family SoC";
+ compatible = "atmel,at91sam9g20";
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 0da66ca..0c2336c 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -14,6 +14,7 @@ initrd_phys-y := 0x20410000
endif
# Keep dtb files sorted alphabetically for each SoC
+# sam9260
# sam9g20
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
# sam9g45
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/9] arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support
[not found] <20120411153515.GK16641@game.jcrosoft.org>
2012-04-11 16:01 ` [PATCH 1/9] ARM: at91: add at91sam9260 DT support Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support Jean-Christophe PLAGNIOL-VILLARD
` (6 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boot/dts/tny_a9260.dts | 15 ++++++
arch/arm/boot/dts/tny_a9260_common.dtsi | 83 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/tny_a9g20.dts | 15 ++++++
arch/arm/mach-at91/Makefile.boot | 2 +
4 files changed, 115 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/tny_a9260.dts
create mode 100644 arch/arm/boot/dts/tny_a9260_common.dtsi
create mode 100644 arch/arm/boot/dts/tny_a9g20.dts
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts
new file mode 100644
index 0000000..367a16d
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+ model = "Calao TNY A9260";
+ compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
new file mode 100644
index 0000000..0e6d3de
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -0,0 +1,83 @@
+/*
+ * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts
new file mode 100644
index 0000000..e1ab64c
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9g20.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+ model = "Calao TNY A9G20";
+ compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 0c2336c..bdf9841 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -15,7 +15,9 @@ endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
# sam9g20
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
# sam9g45
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support
[not found] <20120411153515.GK16641@game.jcrosoft.org>
2012-04-11 16:01 ` [PATCH 1/9] ARM: at91: add at91sam9260 DT support Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 2/9] arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-12 7:06 ` Mohammed, Afzal
2012-04-11 16:01 ` [PATCH 4/9] ARM: at91: USB A926x update nand partition Jean-Christophe PLAGNIOL-VILLARD
` (5 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
Add both board revision support 1mmc and 2mmc and use a dtsi for common part.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boot/dts/at91sam9g20ek.dts | 29 ++++++
arch/arm/boot/dts/at91sam9g20ek_2mmc.dts | 29 ++++++
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 142 +++++++++++++++++++++++++++
arch/arm/mach-at91/Makefile.boot | 2 +
4 files changed, 202 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9g20ek.dts
create mode 100644 arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
create mode 100644 arch/arm/boot/dts/at91sam9g20ek_common.dtsi
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
new file mode 100644
index 0000000..e5324bf
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+ model = "Atmel at91sam9g20ek";
+ compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioA 9 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioA 6 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
new file mode 100644
index 0000000..f1b2e14
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+ model = "Atmel at91sam9g20ek 2 mmc";
+ compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioB 9 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioB 8 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
new file mode 100644
index 0000000..b06c0db
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -0,0 +1,142 @@
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/include/ "at91sam9g20.dtsi"
+
+/ {
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ 24c512@50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ };
+
+ wm8731@1b {
+ compatible = "wm8731";
+ reg = <0x1b>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ btn3 {
+ label = "Buttin 3";
+ gpios = <&pioA 30 1>;
+ linux,code = <0x103>;
+ gpio-key,wakeup;
+ };
+
+ btn4 {
+ label = "Buttin 4";
+ gpios = <&pioA 31 1>;
+ linux,code = <0x104>;
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index bdf9841..30d6c10 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -17,6 +17,8 @@ endif
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
# sam9g20
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
# sam9g45
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 4/9] ARM: at91: USB A926x update nand partition
[not found] <20120411153515.GK16641@game.jcrosoft.org>
` (2 preceding siblings ...)
2012-04-11 16:01 ` [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 5/9] ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common Jean-Christophe PLAGNIOL-VILLARD
` (4 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
We now store the dtb in a nand partition.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boot/dts/usb_a9g20.dts | 11 ++++++++---
arch/arm/mach-at91/board-usb-a926x.c | 4 ++++
2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 7c2399c..0f88ec8 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -74,19 +74,24 @@
reg = <0x80000 0x20000>;
};
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
kernel@a0000 {
label = "kernel";
- reg = <0xa0000 0x400000>;
+ reg = <0xc0000 0x400000>;
};
rootfs@4a0000 {
label = "rootfs";
- reg = <0x4a0000 0x7800000>;
+ reg = <0x4c0000 0x7800000>;
};
data@7ca0000 {
label = "data";
- reg = <0x7ca0000 0x8360000>;
+ reg = <0x7cc0000 0x8340000>;
};
};
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 332ecd4..95393fc 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -172,6 +172,10 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_128K,
}, {
+ .name = "oftree",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
.name = "kernel",
.offset = MTDPART_OFS_NXTBLK,
.size = 4 * SZ_1M,
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 5/9] ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common
[not found] <20120411153515.GK16641@game.jcrosoft.org>
` (3 preceding siblings ...)
2012-04-11 16:01 ` [PATCH 4/9] ARM: at91: USB A926x update nand partition Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 6/9] ARM: at91: DT: add Calao USB A9260 DT support Jean-Christophe PLAGNIOL-VILLARD
` (3 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
This will simplify the adding of the A9260.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
.../dts/{usb_a9g20.dts => usb_a9260_common.dtsi} | 22 +---
arch/arm/boot/dts/usb_a9g20.dts | 165 ++++----------------
2 files changed, 32 insertions(+), 155 deletions(-)
rename arch/arm/boot/dts/{usb_a9g20.dts => usb_a9260_common.dtsi} (77%)
rewrite arch/arm/boot/dts/usb_a9g20.dts (74%)
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9260_common.dtsi
similarity index 77%
rename from arch/arm/boot/dts/usb_a9g20.dts
rename to arch/arm/boot/dts/usb_a9260_common.dtsi
index 0f88ec8..e70d229 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -1,25 +1,12 @@
/*
- * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
*
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2 or later.
*/
-/dts-v1/;
-/include/ "at91sam9g20.dtsi"
/ {
- model = "Calao USB A9G20";
- compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
-
- chosen {
- bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
- };
-
- memory {
- reg = <0x20000000 0x4000000>;
- };
-
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -126,10 +113,5 @@
i2c@0 {
status = "okay";
-
- rv3029c2@56 {
- compatible = "rv3029c2";
- reg = <0x56>;
- };
};
};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
dissimilarity index 74%
index 0f88ec8..2dacb16c 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -1,135 +1,30 @@
-/*
- * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-/include/ "at91sam9g20.dtsi"
-
-/ {
- model = "Calao USB A9G20";
- compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
-
- chosen {
- bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
- };
-
- memory {
- reg = <0x20000000 0x4000000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
- };
-
- ahb {
- apb {
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- usb1: gadget@fffa4000 {
- atmel,vbus-gpio = <&pioC 5 0>;
- status = "okay";
- };
- };
-
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- status = "okay";
-
- at91bootstrap@0 {
- label = "at91bootstrap";
- reg = <0x0 0x20000>;
- };
-
- barebox@20000 {
- label = "barebox";
- reg = <0x20000 0x40000>;
- };
-
- bareboxenv@60000 {
- label = "bareboxenv";
- reg = <0x60000 0x20000>;
- };
-
- bareboxenv2@80000 {
- label = "bareboxenv2";
- reg = <0x80000 0x20000>;
- };
-
- oftree@80000 {
- label = "oftree";
- reg = <0xa0000 0x20000>;
- };
-
- kernel@a0000 {
- label = "kernel";
- reg = <0xc0000 0x400000>;
- };
-
- rootfs@4a0000 {
- label = "rootfs";
- reg = <0x4c0000 0x7800000>;
- };
-
- data@7ca0000 {
- label = "data";
- reg = <0x7cc0000 0x8340000>;
- };
- };
-
- usb0: ohci@00500000 {
- num-ports = <2>;
- status = "okay";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- user_led {
- label = "user_led";
- gpios = <&pioB 21 1>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- user_pb {
- label = "user_pb";
- gpios = <&pioB 10 1>;
- linux,code = <28>;
- gpio-key,wakeup;
- };
- };
-
- i2c@0 {
- status = "okay";
-
- rv3029c2@56 {
- compatible = "rv3029c2";
- reg = <0x56>;
- };
- };
-};
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+/include/ "usb_a9260_common.dtsi"
+
+/ {
+ model = "Calao USB A9G20";
+ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ i2c@0 {
+ rv3029c2@56 {
+ compatible = "rv3029c2";
+ reg = <0x56>;
+ };
+ };
+};
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 6/9] ARM: at91: DT: add Calao USB A9260 DT support
[not found] <20120411153515.GK16641@game.jcrosoft.org>
` (4 preceding siblings ...)
2012-04-11 16:01 ` [PATCH 5/9] ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 7/9] ARM: at91: standard device init only if DT is not populated Jean-Christophe PLAGNIOL-VILLARD
` (2 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boot/dts/usb_a9260.dts | 23 +++++++++++++++++++++++
arch/arm/mach-at91/Makefile.boot | 1 +
2 files changed, 24 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/usb_a9260.dts
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
new file mode 100644
index 0000000..2962160
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260.dts
@@ -0,0 +1,23 @@
+/*
+ * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "usb_a9260_common.dtsi"
+
+/ {
+ model = "Calao USB A9260";
+ compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 30d6c10..b2ac536 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -16,6 +16,7 @@ endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9g20
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 7/9] ARM: at91: standard device init only if DT is not populated.
[not found] <20120411153515.GK16641@game.jcrosoft.org>
` (5 preceding siblings ...)
2012-04-11 16:01 ` [PATCH 6/9] ARM: at91: DT: add Calao USB A9260 DT support Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 8/9] ARM: at91: add at91sam9263 DT support Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 9/9] ARM: at91: add at91sam9263ek " Jean-Christophe PLAGNIOL-VILLARD
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
This will avoid the CONFIG_OF on the *_devices.c as this file is deprecated
for DT support.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/at91sam9260_devices.c | 20 +++-----------------
arch/arm/mach-at91/at91sam9g45_devices.c | 30 ++++--------------------------
2 files changed, 7 insertions(+), 43 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index ad00fe9..d556de1 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -702,25 +702,8 @@ static struct platform_device at91sam9260_tcb1_device = {
.num_resources = ARRAY_SIZE(tcb1_resources),
};
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
- { .compatible = "atmel,at91rm9200-tcb" },
- { /*sentinel*/ }
-};
-#endif
-
static void __init at91_add_device_tc(void)
{
-#if defined(CONFIG_OF)
- struct device_node *np;
-
- np = of_find_matching_node(NULL, tcb_ids);
- if (np) {
- of_node_put(np);
- return;
- }
-#endif
-
platform_device_register(&at91sam9260_tcb0_device);
platform_device_register(&at91sam9260_tcb1_device);
}
@@ -1364,6 +1347,9 @@ void __init at91_add_device_cf(struct at91_cf_data * data) {}
*/
static int __init at91_add_standard_devices(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
at91_add_device_rtt();
at91_add_device_watchdog();
at91_add_device_tc();
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index db2f88c2..35bd42d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -69,15 +69,7 @@ static struct platform_device at_hdmac_device = {
void __init at91_add_device_hdmac(void)
{
-#if defined(CONFIG_OF)
- struct device_node *of_node =
- of_find_node_by_name(NULL, "dma-controller");
-
- if (of_node)
- of_node_put(of_node);
- else
-#endif
- platform_device_register(&at_hdmac_device);
+ platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
@@ -1094,25 +1086,8 @@ static struct platform_device at91sam9g45_tcb1_device = {
.num_resources = ARRAY_SIZE(tcb1_resources),
};
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
- { .compatible = "atmel,at91rm9200-tcb" },
- { /*sentinel*/ }
-};
-#endif
-
static void __init at91_add_device_tc(void)
{
-#if defined(CONFIG_OF)
- struct device_node *np;
-
- np = of_find_matching_node(NULL, tcb_ids);
- if (np) {
- of_node_put(np);
- return;
- }
-#endif
-
platform_device_register(&at91sam9g45_tcb0_device);
platform_device_register(&at91sam9g45_tcb1_device);
}
@@ -1763,6 +1738,9 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 8/9] ARM: at91: add at91sam9263 DT support
[not found] <20120411153515.GK16641@game.jcrosoft.org>
` (6 preceding siblings ...)
2012-04-11 16:01 ` [PATCH 7/9] ARM: at91: standard device init only if DT is not populated Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 9/9] ARM: at91: add at91sam9263ek " Jean-Christophe PLAGNIOL-VILLARD
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boot/dts/at91sam9263.dtsi | 221 ++++++++++++++++++++++++++++++
arch/arm/mach-at91/at91sam9263.c | 10 ++
arch/arm/mach-at91/at91sam9263_devices.c | 20 +++
3 files changed, 251 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9263.dtsi
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
new file mode 100644
index 0000000..baecf52
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -0,0 +1,221 @@
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9263 family SoC";
+ compatible = "atmel,at91sam9263";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ gpio4 = &pioE;
+ tcb0 = &tcb0;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <2>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ ramc: ramc@ffffe200 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffe200 0x200
+ 0xffffe800 0x200>;
+ };
+
+ pit: timer@fffffd30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffd30 0xf>;
+ interrupts = <1 4>;
+ };
+
+ tcb0: timer@fff7c000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfff7c000 0x100>;
+ interrupts = <19 4>;
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <1 4>;
+ status = "disabled";
+ };
+
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x200>;
+ interrupts = <7 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fff90000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff90000 0x200>;
+ interrupts = <8 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fff94000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff94000 0x200>;
+ interrupts = <9 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ macb0: ethernet@fffbc000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xfffbc000 0x100>;
+ interrupts = <21 4>;
+ status = "disabled";
+ };
+
+ usb1: gadget@fff78000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfff78000 0x4000>;
+ interrupts = <24 4>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe000 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioA 22 0
+ &pioD 15 0
+ 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00a00000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00a00000 0x100000>;
+ interrupts = <29 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioB 4 0 /* sda */
+ &pioB 5 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 7fae365..ed91c7e 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -199,6 +199,16 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioC", &pioCDE_clk),
CLKDEV_CON_ID("pioD", &pioCDE_clk),
CLKDEV_CON_ID("pioE", &pioCDE_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+ /* more tc lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
+ CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index dfe5bc0..175e000 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -953,8 +953,25 @@ static struct platform_device at91sam9263_tcb_device = {
.num_resources = ARRAY_SIZE(tcb_resources),
};
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+ { .compatible = "atmel,at91rm9200-tcb" },
+ { /*sentinel*/ }
+};
+#endif
+
static void __init at91_add_device_tc(void)
{
+#if defined(CONFIG_OF)
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, tcb_ids);
+ if (np) {
+ of_node_put(np);
+ return;
+ }
+#endif
+
platform_device_register(&at91sam9263_tcb_device);
}
#else
@@ -1483,6 +1500,9 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
at91_add_device_rtt();
at91_add_device_watchdog();
at91_add_device_tc();
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 9/9] ARM: at91: add at91sam9263ek DT support
[not found] <20120411153515.GK16641@game.jcrosoft.org>
` (7 preceding siblings ...)
2012-04-11 16:01 ` [PATCH 8/9] ARM: at91: add at91sam9263 DT support Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-11 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
8 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-11 16:01 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: devicetree-discuss, Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boot/dts/at91sam9263ek.dts | 156 +++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/Makefile.boot | 2 +
2 files changed, 158 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9263ek.dts
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
new file mode 100644
index 0000000..f86ac4b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -0,0 +1,156 @@
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+ model = "Atmel at91sam9263ek";
+ compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <16367660>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usart0: serial@fff8c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fff78000 {
+ atmel,vbus-gpio = <&pioA 25 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt = <1>;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+
+ usb0: ohci@00a00000 {
+ num-ports = <2>;
+ status = "okay";
+ atmel,vbus-gpio = <&pioA 24 0
+ &pioA 21 0
+ >;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d3 {
+ label = "d3";
+ gpios = <&pioB 7 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ d2 {
+ label = "d2";
+ gpios = <&pioC 29 1>;
+ linux,default-trigger = "nand-disk";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ left_click {
+ label = "left_click";
+ gpios = <&pioC 5 1>;
+ linux,code = <272>;
+ gpio-key,wakeup;
+ };
+
+ right_click {
+ label = "right_click";
+ gpios = <&pioC 4 1>;
+ linux,code = <273>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ 24c512@50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index b2ac536..0c6e0e9 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -17,6 +17,8 @@ endif
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
# sam9g20
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
--
1.7.9.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* RE: [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support
2012-04-11 16:01 ` [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-12 7:06 ` Mohammed, Afzal
[not found] ` <C8443D0743D26F4388EA172BF4E2A7A9317C7B88-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
0 siblings, 1 reply; 13+ messages in thread
From: Mohammed, Afzal @ 2012-04-12 7:06 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD,
linux-arm-kernel@lists.infradead.org, linux@maxim.org.za,
nicolas.ferre@atmel.com
Cc: devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org
+ omap ml
Hi Jean, Andrew, Nicolas,
On Wed, Apr 11, 2012 at 21:31:13, Jean-Christophe PLAGNIOL-VILLARD wrote:
> + ahb {
> + apb {
> + dbgu: serial@fffff200 {
> + status = "okay";
> + };
> +
> + usart0: serial@fffb0000 {
> + status = "okay";
> + };
> +
> + usart1: serial@fffb4000 {
> + status = "okay";
> + };
> +
> + macb0: ethernet@fffc4000 {
> + phy-mode = "rmii";
> + status = "okay";
> + };
> +
> + usb1: gadget@fffa4000 {
> + atmel,vbus-gpio = <&pioC 5 0>;
> + status = "okay";
> + };
> + };
> +
> + nand0: nand@40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "soft";
> + nand-on-flash-bbt;
> + status = "okay";
I have a few queries about handling static memory controller (SMC) of ATMEL
1. How is SMC configured when DT is used ?
2. With "d6a0166 atmel/nand: add DT support", ek_add_device_nand() is no more
present (which was earlier configuring SMC), so is SMC configuration handled
by Kernel on DT boot or is it done by bootloader when DT ?
3. How ek_add_device_dm9000() is going to be achieved with DT ?
4. Is there any plan to create a driver out of SMC code & use DT with it ?
Reason for bringing these queries is that TI OMAP chips have GPMC [1], SMC in ATMEL
seems somewhat similar and currently GPMC is configured in platform code, &
we are creating a driver out of that code [2]. There are different views on where
GPMC driver should go, mfd, misc folders etc, but could not yet get concrete
suggestions even with a loud cry.
If ATMEL is also going driver way, then probably our voice together may be
heard and hopefully it will expedite the matter.
Regards
Afzal
[1]
GPMC (General Purpose Memory Controller) in brief:
GPMC is an unified memory controller dedicated to interfacing external
memory devices like
Asynchronous SRAM like memories and application specific integrated circuit devices.
Asynchronous, synchronous, and page mode burst NOR flash devices NAND flash
Pseudo-SRAM devices
GPMC has to be configured as required by timings of the connected
peripheral. It needs to be configured only initially. Once it is
configured it can be used to handle different protocols like NAND,
NOR. Various kinds of devices like ethernet, uart, usb, fpga etc
can work using GPMC interface. GPMC has a seperate additional
functionality of NAND handling
[2] https://lkml.org/lkml/2012/4/5/210
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support
[not found] ` <C8443D0743D26F4388EA172BF4E2A7A9317C7B88-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
@ 2012-04-12 11:45 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-12 12:14 ` Mohammed, Afzal
0 siblings, 1 reply; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-12 11:45 UTC (permalink / raw)
To: Mohammed, Afzal
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-PelNFVqkFnVyf+4FbqDuWQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
On 07:06 Thu 12 Apr , Mohammed, Afzal wrote:
> + omap ml
>
> Hi Jean, Andrew, Nicolas,
>
> On Wed, Apr 11, 2012 at 21:31:13, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > + ahb {
> > + apb {
> > + dbgu: serial@fffff200 {
> > + status = "okay";
> > + };
> > +
> > + usart0: serial@fffb0000 {
> > + status = "okay";
> > + };
> > +
> > + usart1: serial@fffb4000 {
> > + status = "okay";
> > + };
> > +
> > + macb0: ethernet@fffc4000 {
> > + phy-mode = "rmii";
> > + status = "okay";
> > + };
> > +
> > + usb1: gadget@fffa4000 {
> > + atmel,vbus-gpio = <&pioC 5 0>;
> > + status = "okay";
> > + };
> > + };
> > +
> > + nand0: nand@40000000 {
> > + nand-bus-width = <8>;
> > + nand-ecc-mode = "soft";
> > + nand-on-flash-bbt;
> > + status = "okay";
>
> I have a few queries about handling static memory controller (SMC) of ATMEL
>
> 1. How is SMC configured when DT is used ?
> 2. With "d6a0166 atmel/nand: add DT support", ek_add_device_nand() is no more
> present (which was earlier configuring SMC), so is SMC configuration handled
> by Kernel on DT boot or is it done by bootloader when DT ?
> 3. How ek_add_device_dm9000() is going to be achieved with DT ?
> 4. Is there any plan to create a driver out of SMC code & use DT with it ?
>
> Reason for bringing these queries is that TI OMAP chips have GPMC [1], SMC in ATMEL
> seems somewhat similar and currently GPMC is configured in platform code, &
> we are creating a driver out of that code [2]. There are different views on where
> GPMC driver should go, mfd, misc folders etc, but could not yet get concrete
> suggestions even with a loud cry.
put me in ccc I'll take a look
>
> If ATMEL is also going driver way, then probably our voice together may be
> heard and hopefully it will expedite the matter.
I'm going to add it too my idea was to create something similiar as the
pintrl
you register the ddifferent bank supported buy the SoC and then the driver
request the bank for the dev_name
at soc level you will set the default timings and then the drvier may
manipulate them
I already update the API of sam9_smc to abstract the access to the register.
I expect the code for the request to be generic but handling of the timing IP
specific
Evenif the GPMC is smiliar as the SMC I do not expect a generic API to manage
it easly (for the timings).
Best Regrds,
J
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support
2012-04-12 11:45 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-04-12 12:14 ` Mohammed, Afzal
[not found] ` <C8443D0743D26F4388EA172BF4E2A7A9317C7D68-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
0 siblings, 1 reply; 13+ messages in thread
From: Mohammed, Afzal @ 2012-04-12 12:14 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD
Cc: linux-arm-kernel@lists.infradead.org, linux@maxim.org.za,
nicolas.ferre@atmel.com, devicetree-discuss@lists.ozlabs.org,
linux-omap@vger.kernel.org
Hi Jean,
On Thu, Apr 12, 2012 at 17:15:59, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > If ATMEL is also going driver way, then probably our voice together may be
> > heard and hopefully it will expedite the matter.
> I'm going to add it too my idea was to create something similiar as the
> pintrl
> you register the ddifferent bank supported buy the SoC and then the driver
> request the bank for the dev_name
>
> at soc level you will set the default timings and then the drvier may
> manipulate them
>
> I already update the API of sam9_smc to abstract the access to the register.
Is SMC code being converted to driver ?
Regards
Afzal
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support
[not found] ` <C8443D0743D26F4388EA172BF4E2A7A9317C7D68-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
@ 2012-04-12 12:47 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-04-12 12:47 UTC (permalink / raw)
To: Mohammed, Afzal
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-PelNFVqkFnVyf+4FbqDuWQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
On 12:14 Thu 12 Apr , Mohammed, Afzal wrote:
> Hi Jean,
>
> On Thu, Apr 12, 2012 at 17:15:59, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > If ATMEL is also going driver way, then probably our voice together may be
> > > heard and hopefully it will expedite the matter.
> > I'm going to add it too my idea was to create something similiar as the
> > pintrl
> > you register the ddifferent bank supported buy the SoC and then the driver
> > request the bank for the dev_name
> >
> > at soc level you will set the default timings and then the drvier may
> > manipulate them
> >
> > I already update the API of sam9_smc to abstract the access to the register.
>
> Is SMC code being converted to driver ?
no I'm busy on pinctrl I just cereate an abstracted API
Best Regards,
J.
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2012-04-12 12:47 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20120411153515.GK16641@game.jcrosoft.org>
2012-04-11 16:01 ` [PATCH 1/9] ARM: at91: add at91sam9260 DT support Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 2/9] arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 3/9] ARM: at91: add at91sam9g20ek boards dt support Jean-Christophe PLAGNIOL-VILLARD
2012-04-12 7:06 ` Mohammed, Afzal
[not found] ` <C8443D0743D26F4388EA172BF4E2A7A9317C7B88-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2012-04-12 11:45 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-12 12:14 ` Mohammed, Afzal
[not found] ` <C8443D0743D26F4388EA172BF4E2A7A9317C7D68-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2012-04-12 12:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 4/9] ARM: at91: USB A926x update nand partition Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 5/9] ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 6/9] ARM: at91: DT: add Calao USB A9260 DT support Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 7/9] ARM: at91: standard device init only if DT is not populated Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 8/9] ARM: at91: add at91sam9263 DT support Jean-Christophe PLAGNIOL-VILLARD
2012-04-11 16:01 ` [PATCH 9/9] ARM: at91: add at91sam9263ek " Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox