Re: [PATCH] ARM: dts: imx6qdl-sabresd: correct gpio key's active state

[Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

On Mon, Jan 20, 2014 at 07:42:33PM +0800, Anson Huang wrote:
> From schematic, the power, vol+/- key's active state is low,
> so we need to set the gpio flag to active low.
> 
> Signed-off-by: Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  arch/arm/boot/dts/imx6qdl-sabresd.dtsi |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 91e5dd4..f7689b4 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -58,21 +58,21 @@
>  
>  		power {
>  			label = "Power Button";
> -			gpios = <&gpio3 29 0>;
> +			gpios = <&gpio3 29 1>;

When touching this you could take the opportunity and use
GPIO_ACTIVE_LOW.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html