* [PATCH v3 3/3] Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
[not found] <1395047958-17953-1-git-send-email-k.kozlowski@samsung.com>
@ 2014-03-17 9:19 ` Krzysztof Kozlowski
[not found] ` <1395047958-17953-4-git-send-email-k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Krzysztof Kozlowski @ 2014-03-17 9:19 UTC (permalink / raw)
To: Mike Turquette, linux-arm-kernel, Sangbeom Kim, Samuel Ortiz,
Lee Jones, linux-kernel, linux-samsung-soc
Cc: Tushar Behera, Yadwinder Singh Brar, Sachin Kamat, Kyungmin Park,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Krzysztof Kozlowski, devicetree, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala
Add bindings documentation for clocks on S5M8767 and S2MPS14 devices.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
Documentation/devicetree/bindings/mfd/s2mps11.txt | 24 +++++++++++++--------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 15ee89c3cc7b..67ea05ca8050 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -16,20 +16,25 @@ Optional properties:
- interrupts: Interrupt specifiers for interrupt sources.
Optional nodes:
-- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
- register these as clocks with common clock framework instantiate a sub-node
- named "clocks". It uses the common clock binding documented in :
+- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
+ outputs, so to register these as clocks with common clock framework
+ instantiate a sub-node named "clocks". It uses the common clock binding
+ documented in :
[Documentation/devicetree/bindings/clock/clock-bindings.txt]
+ The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
- #clock-cells: should be 1.
- The following is the list of clocks generated by the controller. Each clock
is assigned an identifier and client nodes use this identifier to specify
the clock which they consume.
- Clock ID
- ----------------------
- 32KhzAP 0
- 32KhzCP 1
- 32KhzBT 2
+ Clock ID Devices
+ ----------------------------------------------------------
+ 32KhzAP 0 S2MPS11, S2MPS14, S5M8767
+ 32KhzCP 1 S2MPS11, S5M8767
+ 32KhzBT 2 S2MPS11, S2MPS14, S5M8767
+
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
+ "samsung,s5m8767-clk"
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -71,7 +76,8 @@ Example:
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
- s2m_osc: clocks{
+ s2m_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
#clock-cells = 1;
clock-output-names = "xx", "yy", "zz";
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread