[PATCH v2] ARM: dts: sun8i: h3: Enable EMAC with external PHY on NanoPi M1 Plus

[PATCH v2] ARM: dts: sun8i: h3: Enable EMAC with external PHY on NanoPi M1 Plus

[Luis Araneda]

The Nanopi M1 Plus uses an external Realtek RTL8211E PHY in RGMII mode,
enabled by a GPIO-based regulator.

Signed-off-by: Luis Araneda <luaraneda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

---
Changes v1 -> v2:
- Removed unnecessary property
- Corrected part address to match reg value

 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 30 +++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 8ddd1b2cc..1273a5e45 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -45,6 +45,20 @@
 / {
 	model = "FriendlyArm NanoPi M1 Plus";
 	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
 };
 
 &ehci1 {
@@ -55,6 +69,22 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
 &ohci1 {
 	status = "okay";
 };
-- 
2.13.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2] ARM: dts: sun8i: h3: Enable EMAC with external PHY on NanoPi M1 Plus

[Chen-Yu Tsai]

On Wed, Aug 2, 2017 at 10:50 AM, Luis Araneda <luaraneda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> The Nanopi M1 Plus uses an external Realtek RTL8211E PHY in RGMII mode,
> enabled by a GPIO-based regulator.
>
> Signed-off-by: Luis Araneda <luaraneda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> ---
> Changes v1 -> v2:
> - Removed unnecessary property
> - Corrected part address to match reg value
>
>  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 30 +++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index 8ddd1b2cc..1273a5e45 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -45,6 +45,20 @@
>  / {
>         model = "FriendlyArm NanoPi M1 Plus";
>         compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
> +
> +       aliases {
> +               ethernet0 = &emac;
> +       };
> +
> +       reg_gmac_3v3: gmac-3v3 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "gmac-3v3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               startup-delay-us = <100000>;
> +               enable-active-high;
> +               gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
> +       };
>  };
>
>  &ehci1 {
> @@ -55,6 +69,22 @@
>         status = "okay";
>  };
>
> +&emac {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&emac_rgmii_pins>;
> +       phy-supply = <&reg_gmac_3v3>;
> +       phy-handle = <&ext_rgmii_phy>;
> +       phy-mode = "rgmii";
> +       status = "okay";
> +};
> +
> +&mdio {
> +       ext_rgmii_phy: ethernet-phy@0 {
> +               compatible = "ethernet-phy-ieee802.3-c22";
> +               reg = <0>;

Please use the actual address as designed on the board.
It seems to be 7. 0 for the RTL8211E is a broadcast address.

ChenYu

> +       };
> +};
> +
>  &ohci1 {
>         status = "okay";
>  };
> --
> 2.13.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2] ARM: dts: sun8i: h3: Enable EMAC with external PHY on NanoPi M1 Plus

[Luis Araneda]

Hi,


You're right again.
I tested the board with the address set to 7 and it worked.
Also, I tested other addresses to be sure (that they don't work).

I'll send a v3 in a couple of hours if no more comments are received.


Cheers,

Luis Araneda.

On Tue, Aug 1, 2017 at 10:55 PM, Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> wrote:
> On Wed, Aug 2, 2017 at 10:50 AM, Luis Araneda <luaraneda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> The Nanopi M1 Plus uses an external Realtek RTL8211E PHY in RGMII mode,
>> enabled by a GPIO-based regulator.
>>
>> Signed-off-by: Luis Araneda <luaraneda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>
>> ---
>> Changes v1 -> v2:
>> - Removed unnecessary property
>> - Corrected part address to match reg value
>>
>>  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 30 +++++++++++++++++++++++++++
>>  1 file changed, 30 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
>> index 8ddd1b2cc..1273a5e45 100644
>> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
>> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
>> @@ -45,6 +45,20 @@
>>  / {
>>         model = "FriendlyArm NanoPi M1 Plus";
>>         compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
>> +
>> +       aliases {
>> +               ethernet0 = &emac;
>> +       };
>> +
>> +       reg_gmac_3v3: gmac-3v3 {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "gmac-3v3";
>> +               regulator-min-microvolt = <3300000>;
>> +               regulator-max-microvolt = <3300000>;
>> +               startup-delay-us = <100000>;
>> +               enable-active-high;
>> +               gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
>> +       };
>>  };
>>
>>  &ehci1 {
>> @@ -55,6 +69,22 @@
>>         status = "okay";
>>  };
>>
>> +&emac {
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&emac_rgmii_pins>;
>> +       phy-supply = <&reg_gmac_3v3>;
>> +       phy-handle = <&ext_rgmii_phy>;
>> +       phy-mode = "rgmii";
>> +       status = "okay";
>> +};
>> +
>> +&mdio {
>> +       ext_rgmii_phy: ethernet-phy@0 {
>> +               compatible = "ethernet-phy-ieee802.3-c22";
>> +               reg = <0>;
>
> Please use the actual address as designed on the board.
> It seems to be 7. 0 for the RTL8211E is a broadcast address.
>
> ChenYu
>
>> +       };
>> +};
>> +
>>  &ohci1 {
>>         status = "okay";
>>  };
>> --
>> 2.13.3
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html