* of: unittest fails on UML
@ 2017-10-13 22:38 Thomas Meyer
2017-10-16 20:45 ` Rob Herring
0 siblings, 1 reply; 2+ messages in thread
From: Thomas Meyer @ 2017-10-13 22:38 UTC (permalink / raw)
To: robh+dt, frowand.list, devicetree, linux-kernel
Hi,
drivers/of/unittest.c fails on UML with a kernel crash.
The crash is due to of_find_device_by_node() returning NULL:
841│ /* Test that a missing irq domain returns -EPROBE_DEFER */
842│ np = of_find_node_by_path("/testcase-data/testcase-device1");
843├> pdev = of_find_device_by_node(np);
844│ unittest(pdev, "device 1 creation failed\n");
845│
846│ irq = platform_get_irq(pdev, 0);
847│ unittest(irq == -EPROBE_DEFER, "device deferred probe failed - %d\n", irq);
in line 846 platform_get_irq is called with NULL.
This helps to get through unittest.c:
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d1bd99271066..a3b3d0ec8818 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -86,6 +86,9 @@ EXPORT_SYMBOL_GPL(platform_get_resource);
*/
int platform_get_irq(struct platform_device *dev, unsigned int num)
{
+ if (!dev)
+ return -ENXIO;
+
#ifdef CONFIG_SPARC
/* sparc does not have irqs represented as IORESOURCE_IRQ resources */
if (!dev || num >= dev->archdata.num_irqs)
log extract:
[ 24.850000] kobject: 'fragment@0' (000000006c818aa8): kobject_add_internal: parent: 'overlay4', set: 'devicetree'
[ 24.850000] ### dt-test ### start of unittest - you will see error messages
[ 24.850000] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 24.860000] kobject: 'n1' (000000006cefca50): kobject_add_internal: parent: 'changeset', set: 'devicetree'
[ 24.860000] kobject: 'n2' (000000006cefde30): kobject_add_internal: parent: 'changeset', set: 'devicetree'
[ 24.860000] kobject: 'n21' (000000006cefcda0): kobject_add_internal: parent: 'n2', set: 'devicetree'
[ 24.860000] kobject: 'node-remove' (000000006c800880): kobject_add_internal: parent: 'changeset', set: 'devicetree'
[ 24.860000] kobject: 'n21' (000000006cefcda0): kobject_release, parent (null) (delayed 400)
[ 24.860000] kobject: 'n2' (000000006cefde30): kobject_release, parent (null) (delayed 100)
[ 24.860000] kobject: 'n1' (000000006cefca50): kobject_release, parent (null) (delayed 300)
[ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():844 device 1 creation failed
[ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():847 device deferred probe failed - -6
[ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():852 device 2 creation failed
[ 24.860000] Registering platform device 'unittest-bus.0'. Parent at platform
[ 24.860000] device: 'unittest-bus.0': device_add
[ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_add_internal: parent: 'platform', set: 'devices'
[ 24.860000] bus: 'platform': add device unittest-bus.0
[ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_uevent_env
[ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): fill_kobj_path: path = '/devices/platform/unittest-bus.0'
[ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():882 Could not create device for node 'dev'
[ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():882 Could not create device for node 'dev'
[ 24.860000] bus: 'platform': remove device unittest-bus.0
[ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_uevent_env
[ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): fill_kobj_path: path = '/devices/platform/unittest-bus.0'
[ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_release, parent (null) (delayed 100)
[ 24.860000] bus: 'platform': add driver unittest
[ 24.860000] kobject: 'unittest' (000000006c86bba8): kobject_add_internal: parent: 'drivers', set: 'drivers'
[ 24.870000] kobject: 'unittest' (000000006c86bba8): kobject_uevent_env
[ 24.870000] kobject: 'unittest' (000000006c86bba8): fill_kobj_path: path = '/bus/platform/drivers/unittest'
[ 24.870000] ### dt-test ### FAIL of_unittest_overlay():1944 could not populate bus @ "/testcase-data/overlay-node/test-bus"
[ 24.870000] ### dt-test ### FAIL of_unittest_overlay_high_level():2201 overlay_base_root not initialized
[ 24.870000] ### dt-test ### end of unittest - 163 passed, 7 failed
so any idea what is going on here?
any help is appreciated.
with kind regards
thomas
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: of: unittest fails on UML
2017-10-13 22:38 of: unittest fails on UML Thomas Meyer
@ 2017-10-16 20:45 ` Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2017-10-16 20:45 UTC (permalink / raw)
To: Thomas Meyer
Cc: Frank Rowand, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
On Fri, Oct 13, 2017 at 5:38 PM, Thomas Meyer <thomas@m3y3r.de> wrote:
> Hi,
>
> drivers/of/unittest.c fails on UML with a kernel crash.
> The crash is due to of_find_device_by_node() returning NULL:
>
> 841│ /* Test that a missing irq domain returns -EPROBE_DEFER */
> 842│ np = of_find_node_by_path("/testcase-data/testcase-device1");
> 843├> pdev = of_find_device_by_node(np);
> 844│ unittest(pdev, "device 1 creation failed\n");
> 845│
> 846│ irq = platform_get_irq(pdev, 0);
> 847│ unittest(irq == -EPROBE_DEFER, "device deferred probe failed - %d\n", irq);
>
> in line 846 platform_get_irq is called with NULL.
The problem is IRQ_DOMAIN is not enabled.
>
> This helps to get through unittest.c:
>
> diff --git a/drivers/base/platform.c b/drivers/base/platform.c
> index d1bd99271066..a3b3d0ec8818 100644
> --- a/drivers/base/platform.c
> +++ b/drivers/base/platform.c
> @@ -86,6 +86,9 @@ EXPORT_SYMBOL_GPL(platform_get_resource);
> */
> int platform_get_irq(struct platform_device *dev, unsigned int num)
> {
> + if (!dev)
> + return -ENXIO;
> +
> #ifdef CONFIG_SPARC
> /* sparc does not have irqs represented as IORESOURCE_IRQ resources */
> if (!dev || num >= dev->archdata.num_irqs)
>
> log extract:
>
> [ 24.850000] kobject: 'fragment@0' (000000006c818aa8): kobject_add_internal: parent: 'overlay4', set: 'devicetree'
> [ 24.850000] ### dt-test ### start of unittest - you will see error messages
> [ 24.850000] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
> [ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
> [ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
> [ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
> [ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
> [ 24.860000] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
> [ 24.860000] kobject: 'n1' (000000006cefca50): kobject_add_internal: parent: 'changeset', set: 'devicetree'
> [ 24.860000] kobject: 'n2' (000000006cefde30): kobject_add_internal: parent: 'changeset', set: 'devicetree'
> [ 24.860000] kobject: 'n21' (000000006cefcda0): kobject_add_internal: parent: 'n2', set: 'devicetree'
> [ 24.860000] kobject: 'node-remove' (000000006c800880): kobject_add_internal: parent: 'changeset', set: 'devicetree'
> [ 24.860000] kobject: 'n21' (000000006cefcda0): kobject_release, parent (null) (delayed 400)
> [ 24.860000] kobject: 'n2' (000000006cefde30): kobject_release, parent (null) (delayed 100)
> [ 24.860000] kobject: 'n1' (000000006cefca50): kobject_release, parent (null) (delayed 300)
> [ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():844 device 1 creation failed
> [ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():847 device deferred probe failed - -6
> [ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():852 device 2 creation failed
> [ 24.860000] Registering platform device 'unittest-bus.0'. Parent at platform
> [ 24.860000] device: 'unittest-bus.0': device_add
> [ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_add_internal: parent: 'platform', set: 'devices'
> [ 24.860000] bus: 'platform': add device unittest-bus.0
> [ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_uevent_env
> [ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): fill_kobj_path: path = '/devices/platform/unittest-bus.0'
> [ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():882 Could not create device for node 'dev'
> [ 24.860000] ### dt-test ### FAIL of_unittest_platform_populate():882 Could not create device for node 'dev'
> [ 24.860000] bus: 'platform': remove device unittest-bus.0
> [ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_uevent_env
> [ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): fill_kobj_path: path = '/devices/platform/unittest-bus.0'
> [ 24.860000] kobject: 'unittest-bus.0' (000000006cf11568): kobject_release, parent (null) (delayed 100)
> [ 24.860000] bus: 'platform': add driver unittest
> [ 24.860000] kobject: 'unittest' (000000006c86bba8): kobject_add_internal: parent: 'drivers', set: 'drivers'
> [ 24.870000] kobject: 'unittest' (000000006c86bba8): kobject_uevent_env
> [ 24.870000] kobject: 'unittest' (000000006c86bba8): fill_kobj_path: path = '/bus/platform/drivers/unittest'
> [ 24.870000] ### dt-test ### FAIL of_unittest_overlay():1944 could not populate bus @ "/testcase-data/overlay-node/test-bus"
> [ 24.870000] ### dt-test ### FAIL of_unittest_overlay_high_level():2201 overlay_base_root not initialized
> [ 24.870000] ### dt-test ### end of unittest - 163 passed, 7 failed
>
> so any idea what is going on here?
> any help is appreciated.
I got things working a while back with this (whitespace damaged)
patch. I'm not all that happy with it. Perhaps the unittest should
select IRQ_DOMAIN instead. Really, I think HAS_IOMEM should die. It is
true for practically every arch (all but tile, score, and um) and
really only controls enabling some drivers or not. It selects
GENERIC_IO which controls MTD visibility and nothing else.
commit 9833012b9290292066127890df07eaccae4ee6e3
Author: Rob Herring <robh@kernel.org>
Date: Tue Jul 25 14:46:56 2017 -0500
UML fixes for DT unittests
Signed-off-by: Rob Herring <robh@kernel.org>
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 85f6dd204ab6..c3ff9a3b4503 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -12,6 +12,7 @@ config UML
select GENERIC_IO
select GENERIC_CLOCKEVENTS
select HAVE_GCC_PLUGINS
+ select IRQ_DOMAIN
select TTY # Needed for line.c
config MMU
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index ba7b034b2b91..a688478d763e 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -57,7 +57,7 @@ config OF_DYNAMIC
config OF_ADDRESS
def_bool y
- depends on !SPARC && HAS_IOMEM
+ depends on !SPARC && (HAS_IOMEM || UML)
select OF_ADDRESS_PCI if PCI
config OF_ADDRESS_PCI
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-16 20:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-13 22:38 of: unittest fails on UML Thomas Meyer
2017-10-16 20:45 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox