* [PATCH] arm64: allwinner: h6: restore the usage of CCU slice macros
@ 2018-04-03 13:40 Icenowy Zheng
[not found] ` <20180403134024.43156-1-icenowy-h8G6r0blFSE@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Icenowy Zheng @ 2018-04-03 13:40 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
As the definition of CCU slice macros are already merged into the source
tree, restore the usage of the macros now.
Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 56563150d61a..4debc3962830 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -4,6 +4,8 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -115,7 +117,7 @@
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 26>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -134,8 +136,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 70>;
- resets = <&ccu 21>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -145,8 +147,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 71>;
- resets = <&ccu 22>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -156,8 +158,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 72>;
- resets = <&ccu 23>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
@@ -167,8 +169,8 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 73>;
- resets = <&ccu 24>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
};
--
2.15.1
^ permalink raw reply related [flat|nested] 3+ messages in thread[parent not found: <20180403134024.43156-1-icenowy-h8G6r0blFSE@public.gmane.org>]
* Re: [PATCH] arm64: allwinner: h6: restore the usage of CCU slice macros [not found] ` <20180403134024.43156-1-icenowy-h8G6r0blFSE@public.gmane.org> @ 2018-04-23 6:58 ` Icenowy Zheng [not found] ` <1524466728.25095.0.camel-h8G6r0blFSE@public.gmane.org> 0 siblings, 1 reply; 3+ messages in thread From: Icenowy Zheng @ 2018-04-23 6:58 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r 在 2018-04-03二的 21:40 +0800,Icenowy Zheng写道: > As the definition of CCU slice macros are already merged into the > source > tree, restore the usage of the macros now. Maxime, could you check this patch and pick it? Thanks! > > Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org> > --- > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 20 +++++++++++------- > -- > 1 file changed, 11 insertions(+), 9 deletions(-) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > index 56563150d61a..4debc3962830 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > @@ -4,6 +4,8 @@ > */ > > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/sun50i-h6-ccu.h> > +#include <dt-bindings/reset/sun50i-h6-ccu.h> > > / { > interrupt-parent = <&gic>; > @@ -115,7 +117,7 @@ > <GIC_SPI 53 > IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 54 > IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 59 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&ccu 26>, <&osc24M>, <&osc32k>; > + clocks = <&ccu CLK_APB1>, <&osc24M>, > <&osc32k>; > clock-names = "apb", "hosc", "losc"; > gpio-controller; > #gpio-cells = <3>; > @@ -134,8 +136,8 @@ > interrupts = <GIC_SPI 0 > IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&ccu 70>; > - resets = <&ccu 21>; > + clocks = <&ccu CLK_BUS_UART0>; > + resets = <&ccu RST_BUS_UART0>; > status = "disabled"; > }; > > @@ -145,8 +147,8 @@ > interrupts = <GIC_SPI 1 > IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&ccu 71>; > - resets = <&ccu 22>; > + clocks = <&ccu CLK_BUS_UART1>; > + resets = <&ccu RST_BUS_UART1>; > status = "disabled"; > }; > > @@ -156,8 +158,8 @@ > interrupts = <GIC_SPI 2 > IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&ccu 72>; > - resets = <&ccu 23>; > + clocks = <&ccu CLK_BUS_UART2>; > + resets = <&ccu RST_BUS_UART2>; > status = "disabled"; > }; > > @@ -167,8 +169,8 @@ > interrupts = <GIC_SPI 3 > IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&ccu 73>; > - resets = <&ccu 24>; > + clocks = <&ccu CLK_BUS_UART3>; > + resets = <&ccu RST_BUS_UART3>; > status = "disabled"; > }; > }; -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. ^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <1524466728.25095.0.camel-h8G6r0blFSE@public.gmane.org>]
* Re: [PATCH] arm64: allwinner: h6: restore the usage of CCU slice macros [not found] ` <1524466728.25095.0.camel-h8G6r0blFSE@public.gmane.org> @ 2018-04-23 7:47 ` Maxime Ripard 0 siblings, 0 replies; 3+ messages in thread From: Maxime Ripard @ 2018-04-23 7:47 UTC (permalink / raw) To: Icenowy Zheng Cc: Chen-Yu Tsai, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r [-- Attachment #1: Type: text/plain, Size: 778 bytes --] On Mon, Apr 23, 2018 at 02:58:48PM +0800, Icenowy Zheng wrote: > 在 2018-04-03二的 21:40 +0800,Icenowy Zheng写道: > > As the definition of CCU slice macros are already merged into the > > source > > tree, restore the usage of the macros now. > > Maxime, could you check this patch and pick it? Applied, thanks! maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-04-23 7:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-04-03 13:40 [PATCH] arm64: allwinner: h6: restore the usage of CCU slice macros Icenowy Zheng
[not found] ` <20180403134024.43156-1-icenowy-h8G6r0blFSE@public.gmane.org>
2018-04-23 6:58 ` Icenowy Zheng
[not found] ` <1524466728.25095.0.camel-h8G6r0blFSE@public.gmane.org>
2018-04-23 7:47 ` Maxime Ripard
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox