Re: [PATCH v2 18/23] dt-bindings: thermal: armada: add reference to new bindings

[Rob Herring <robh@kernel.org>]

On Mon, Jun 25, 2018 at 05:12:34PM +0200, Miquel Raynal wrote:
> New bindings (with the syscon and the overheat interrupt) are available

What interrupt? It's not in your new binding.

> for AP806 and CP110 compatibles. Add a reference to these files from the
> original documentation.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  Documentation/devicetree/bindings/thermal/armada-thermal.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
> index e0d013a2e66d..f3b441100890 100644
> --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
> @@ -10,6 +10,11 @@ Required properties:
>      * marvell,armada-ap806-thermal
>      * marvell,armada-cp110-thermal

Really you should not be using the same compatible for both. Now you 
have 2 drivers matching to same compatibles.

Can't you make this a child of the syscon without breaking the binding?

>  
> +Note: these bindings are deprecated for AP806/CP110 and should instead
> +follow the rules described in:
> +Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> +Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
> +
>  - reg: Device's register space.
>    Two entries are expected, see the examples below. The first one points
>    to the status register (4B). The second one points to the control
> -- 
> 2.14.1
>