[PATCH v4 1/2] media: dt-bindings: media: video-i2c: add melexis mlx90640 documentation

[PATCH v4 1/2] media: dt-bindings: media: video-i2c: add melexis mlx90640 documentation

[Matt Ranostay]

Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 .../bindings/media/i2c/melexis,mlx90640.txt   | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
new file mode 100644
index 000000000000..060d2b7a5893
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
@@ -0,0 +1,20 @@
+* Melexis MLX90640 FIR Sensor
+
+Melexis MLX90640 FIR sensor support which allows recording of thermal data
+with 32x24 resolution excluding 2 lines of coefficient data that is used by
+userspace to render processed frames.
+
+Required Properties:
+ - compatible : Must be "melexis,mlx90640"
+ - reg : i2c address of the device
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		mlx90640@33 {
+			compatible = "melexis,mlx90640";
+			reg = <0x33>;
+		};
+		...
+	};
-- 
2.17.1

Re: [PATCH v4 1/2] media: dt-bindings: media: video-i2c: add melexis mlx90640 documentation

[Rob Herring]

On Tue, 11 Dec 2018 07:17:00 -0800, Matt Ranostay wrote:
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
> ---
>  .../bindings/media/i2c/melexis,mlx90640.txt   | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 1/2] media: dt-bindings: media: video-i2c: add melexis mlx90640 documentation

[Hans Verkuil]

Hi Matt,

I'm merging this patch, but can you add a new patch that updates the entry for
this driver in the MAINTAINERS file with references to the relevant bindings files?

I.e., for this one you add:

F:	Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt

but you need to add the panasonic bindings file as well.

Thanks!

	Hans

On 12/11/18 4:17 PM, Matt Ranostay wrote:
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
> ---
>  .../bindings/media/i2c/melexis,mlx90640.txt   | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
> new file mode 100644
> index 000000000000..060d2b7a5893
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
> @@ -0,0 +1,20 @@
> +* Melexis MLX90640 FIR Sensor
> +
> +Melexis MLX90640 FIR sensor support which allows recording of thermal data
> +with 32x24 resolution excluding 2 lines of coefficient data that is used by
> +userspace to render processed frames.
> +
> +Required Properties:
> + - compatible : Must be "melexis,mlx90640"
> + - reg : i2c address of the device
> +
> +Example:
> +
> +	i2c0@1c22000 {
> +		...
> +		mlx90640@33 {
> +			compatible = "melexis,mlx90640";
> +			reg = <0x33>;
> +		};
> +		...
> +	};
>