* [PATCH v13 2/2] phy: samsung-ufs: add UFS PHY driver for samsung SoC
2020-07-16 19:22 ` [PATCH v13 1/2] dt-bindings: phy: Document Samsung UFS PHY bindings Alim Akhtar
@ 2020-07-16 19:22 ` Alim Akhtar
2020-07-17 8:05 ` [PATCH v13 1/2] dt-bindings: phy: Document Samsung UFS PHY bindings Vinod Koul
1 sibling, 0 replies; 3+ messages in thread
From: Alim Akhtar @ 2020-07-16 19:22 UTC (permalink / raw)
To: vkoul
Cc: robh+dt, krzk, linux-kernel, devicetree, linux-arm-kernel,
linux-samsung-soc, Alim Akhtar, Kishon Vijay Abraham I
This patch introduces Samsung UFS PHY driver. This driver
supports to deal with phy calibration and power control
according to UFS host driver's behavior.
[Robot: -Wmissing-prototypes and -Wsometimes-uninitialized]
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Seungwon Jeon <essuuj@gmail.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
- Changes V12 -> V13
* Addressed more review comments from Vinod [1]
[1] https://lkml.org/lkml/2020/7/13/99
- Changes V11 -> V12
* Fixed kernel test robot warnings
- Changes V10 -> V11
* Addressed review comments from Vinod
drivers/phy/samsung/Kconfig | 9 +
drivers/phy/samsung/Makefile | 1 +
drivers/phy/samsung/phy-exynos7-ufs.h | 81 ++++++
drivers/phy/samsung/phy-samsung-ufs.c | 366 ++++++++++++++++++++++++++
drivers/phy/samsung/phy-samsung-ufs.h | 139 ++++++++++
5 files changed, 596 insertions(+)
create mode 100644 drivers/phy/samsung/phy-exynos7-ufs.h
create mode 100644 drivers/phy/samsung/phy-samsung-ufs.c
create mode 100644 drivers/phy/samsung/phy-samsung-ufs.h
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 19f2e3119343..e20d2fcc9fe7 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -29,6 +29,15 @@ config PHY_EXYNOS_PCIE
Enable PCIe PHY support for Exynos SoC series.
This driver provides PHY interface for Exynos PCIe controller.
+config PHY_SAMSUNG_UFS
+ tristate "SAMSUNG SoC series UFS PHY driver"
+ depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support the Samsung UFS PHY driver for
+ Samsung SoCs. This driver provides the interface for UFS
+ host controller to do PHY related programming.
+
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
index db9b1aa0de6e..3959100fe8a2 100644
--- a/drivers/phy/samsung/Makefile
+++ b/drivers/phy/samsung/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
+obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-samsung-ufs.o
obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
phy-exynos-usb2-y += phy-samsung-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
diff --git a/drivers/phy/samsung/phy-exynos7-ufs.h b/drivers/phy/samsung/phy-exynos7-ufs.h
new file mode 100644
index 000000000000..518923141958
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos7-ufs.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver data for Samsung EXYNOS7 SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ */
+#ifndef _PHY_EXYNOS7_UFS_H_
+#define _PHY_EXYNOS7_UFS_H_
+
+#include "phy-samsung-ufs.h"
+
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
+ /* Setting order: 1st(0x16, 2nd(0x15) */
+ PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
+ PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
+ PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
+ END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
+ [CFG_PRE_INIT] = exynos7_pre_init_cfg,
+ [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg,
+ [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg,
+};
+
+static struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
+ .cfg = exynos7_ufs_phy_cfgs,
+ .isol = {
+ .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
+ .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
+ .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
+ },
+ .has_symbol_clk = 1,
+};
+
+#endif /* _PHY_EXYNOS7_UFS_H_ */
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
new file mode 100644
index 000000000000..43ef77d1d96c
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver for Samsung SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "phy-samsung-ufs.h"
+
+#define for_each_phy_lane(phy, i) \
+ for (i = 0; i < (phy)->lane_cnt; i++)
+#define for_each_phy_cfg(cfg) \
+ for (; (cfg)->id; (cfg)++)
+
+#define PHY_DEF_LANE_CNT 1
+
+static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
+ const struct samsung_ufs_phy_cfg *cfg,
+ u8 lane)
+{
+ enum {LANE_0, LANE_1}; /* lane index */
+
+ switch (lane) {
+ case LANE_0:
+ writel(cfg->val, (phy)->reg_pma + cfg->off_0);
+ break;
+ case LANE_1:
+ if (cfg->id == PHY_TRSV_BLK)
+ writel(cfg->val, (phy)->reg_pma + cfg->off_1);
+ break;
+ }
+}
+
+static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ const unsigned int timeout_us = 100000;
+ const unsigned int sleep_us = 10;
+ u32 val;
+ int err;
+
+ err = readl_poll_timeout(
+ ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
+ val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
+ if (err) {
+ dev_err(ufs_phy->dev,
+ "failed to get phy pll lock acquisition %d\n", err);
+ goto out;
+ }
+
+ err = readl_poll_timeout(
+ ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
+ val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
+ if (err)
+ dev_err(ufs_phy->dev,
+ "failed to get phy cdr lock acquisition %d\n", err);
+out:
+ return err;
+}
+
+static int samsung_ufs_phy_calibrate(struct phy *phy)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ struct samsung_ufs_phy_cfg **cfgs = ufs_phy->cfg;
+ const struct samsung_ufs_phy_cfg *cfg;
+ int err = 0;
+ int i;
+
+ if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
+ ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
+ dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state);
+ return -EINVAL;
+ }
+
+ cfg = cfgs[ufs_phy->ufs_phy_state];
+ if (!cfg)
+ goto out;
+
+ for_each_phy_cfg(cfg) {
+ for_each_phy_lane(ufs_phy, i) {
+ samsung_ufs_phy_config(ufs_phy, cfg, i);
+ }
+ }
+
+ if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
+ err = samsung_ufs_phy_wait_for_lock_acq(phy);
+
+ /**
+ * In Samsung ufshci, PHY need to be calibrated at different
+ * stages / state mainly before Linkstartup, after Linkstartup,
+ * before power mode change and after power mode change.
+ * Below state machine to make sure to calibrate PHY in each
+ * state. Here after configuring PHY in a given state, will
+ * change the state to next state so that next state phy
+ * calibration value can be programed
+ */
+out:
+ switch (ufs_phy->ufs_phy_state) {
+ case CFG_PRE_INIT:
+ ufs_phy->ufs_phy_state = CFG_POST_INIT;
+ break;
+ case CFG_POST_INIT:
+ ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
+ break;
+ case CFG_PRE_PWR_HS:
+ ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
+ break;
+ case CFG_POST_PWR_HS:
+ /* Change back to INIT state */
+ ufs_phy->ufs_phy_state = CFG_PRE_INIT;
+ break;
+ default:
+ dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
+ }
+
+ return err;
+}
+
+static int samsung_ufs_phy_symbol_clk_init(struct samsung_ufs_phy *phy)
+{
+ int ret;
+
+ phy->tx0_symbol_clk = devm_clk_get(phy->dev, "tx0_symbol_clk");
+ if (IS_ERR(phy->tx0_symbol_clk)) {
+ dev_err(phy->dev, "failed to get tx0_symbol_clk clock\n");
+ return PTR_ERR(phy->tx0_symbol_clk);
+ }
+
+ phy->rx0_symbol_clk = devm_clk_get(phy->dev, "rx0_symbol_clk");
+ if (IS_ERR(phy->rx0_symbol_clk)) {
+ dev_err(phy->dev, "failed to get rx0_symbol_clk clock\n");
+ return PTR_ERR(phy->rx0_symbol_clk);
+ }
+
+ phy->rx1_symbol_clk = devm_clk_get(phy->dev, "rx1_symbol_clk");
+ if (IS_ERR(phy->rx0_symbol_clk)) {
+ dev_err(phy->dev, "failed to get rx1_symbol_clk clock\n");
+ return PTR_ERR(phy->rx1_symbol_clk);
+ }
+
+ ret = clk_prepare_enable(phy->tx0_symbol_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: tx0_symbol_clk enable failed %d\n", __func__, ret);
+ goto out;
+ }
+
+ ret = clk_prepare_enable(phy->rx0_symbol_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: rx0_symbol_clk enable failed %d\n", __func__, ret);
+ goto out_disable_tx0_clk;
+ }
+
+ ret = clk_prepare_enable(phy->rx1_symbol_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: rx1_symbol_clk enable failed %d\n", __func__, ret);
+ goto out_disable_rx0_clk;
+ }
+
+ return 0;
+
+out_disable_rx0_clk:
+ clk_disable_unprepare(phy->rx0_symbol_clk);
+out_disable_tx0_clk:
+ clk_disable_unprepare(phy->tx0_symbol_clk);
+out:
+ return ret;
+}
+
+static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
+{
+ int ret;
+
+ phy->ref_clk = devm_clk_get(phy->dev, "ref_clk");
+ if (IS_ERR(phy->ref_clk))
+ dev_err(phy->dev, "failed to get ref_clk clock\n");
+
+ ret = clk_prepare_enable(phy->ref_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk enable failed %d\n", __func__, ret);
+ return ret;
+ }
+
+ dev_dbg(phy->dev, "UFS MPHY ref_clk_rate = %ld\n", clk_get_rate(phy->ref_clk));
+
+ return 0;
+}
+
+static int samsung_ufs_phy_init(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+ int ret;
+
+ ss_phy->lane_cnt = phy->attrs.bus_width;
+ ss_phy->ufs_phy_state = CFG_PRE_INIT;
+
+ if (ss_phy->drvdata->has_symbol_clk) {
+ ret = samsung_ufs_phy_symbol_clk_init(ss_phy);
+ if (ret)
+ dev_err(ss_phy->dev, "failed to set ufs phy symbol clocks\n");
+ }
+
+ ret = samsung_ufs_phy_clks_init(ss_phy);
+ if (ret)
+ dev_err(ss_phy->dev, "failed to set ufs phy clocks\n");
+
+ ret = samsung_ufs_phy_calibrate(phy);
+ if (ret)
+ dev_err(ss_phy->dev, "ufs phy calibration failed\n");
+
+ return ret;
+}
+
+static int samsung_ufs_phy_power_on(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ samsung_ufs_phy_ctrl_isol(ss_phy, false);
+ return 0;
+}
+
+static int samsung_ufs_phy_power_off(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ samsung_ufs_phy_ctrl_isol(ss_phy, true);
+ return 0;
+}
+
+static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
+ enum phy_mode mode, int submode)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy);
+
+ ss_phy->mode = PHY_MODE_INVALID;
+
+ if (mode > 0)
+ ss_phy->mode = mode;
+
+ return 0;
+}
+
+static int samsung_ufs_phy_exit(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ clk_disable_unprepare(ss_phy->ref_clk);
+
+ if (ss_phy->drvdata->has_symbol_clk) {
+ clk_disable_unprepare(ss_phy->tx0_symbol_clk);
+ clk_disable_unprepare(ss_phy->rx0_symbol_clk);
+ clk_disable_unprepare(ss_phy->rx1_symbol_clk);
+ }
+
+ return 0;
+}
+
+static struct phy_ops samsung_ufs_phy_ops = {
+ .init = samsung_ufs_phy_init,
+ .exit = samsung_ufs_phy_exit,
+ .power_on = samsung_ufs_phy_power_on,
+ .power_off = samsung_ufs_phy_power_off,
+ .calibrate = samsung_ufs_phy_calibrate,
+ .set_mode = samsung_ufs_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id samsung_ufs_phy_match[];
+
+static int samsung_ufs_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ struct samsung_ufs_phy *phy;
+ struct phy *gen_phy;
+ struct phy_provider *phy_provider;
+ const struct samsung_ufs_phy_drvdata *drvdata;
+ int err = 0;
+
+ match = of_match_node(samsung_ufs_phy_match, dev->of_node);
+ if (!match) {
+ err = -EINVAL;
+ dev_err(dev, "failed to get match_node\n");
+ goto out;
+ }
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma");
+ if (IS_ERR(phy->reg_pma)) {
+ err = PTR_ERR(phy->reg_pma);
+ goto out;
+ }
+
+ phy->reg_pmu = syscon_regmap_lookup_by_phandle(
+ dev->of_node, "samsung,pmu-syscon");
+ if (IS_ERR(phy->reg_pmu)) {
+ err = PTR_ERR(phy->reg_pmu);
+ dev_err(dev, "failed syscon remap for pmu\n");
+ goto out;
+ }
+
+ gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
+ if (IS_ERR(gen_phy)) {
+ err = PTR_ERR(gen_phy);
+ dev_err(dev, "failed to create PHY for ufs-phy\n");
+ goto out;
+ }
+
+ drvdata = match->data;
+ phy->dev = dev;
+ phy->drvdata = drvdata;
+ phy->cfg = (struct samsung_ufs_phy_cfg **)drvdata->cfg;
+ phy->isol = &drvdata->isol;
+ phy->lane_cnt = PHY_DEF_LANE_CNT;
+
+ phy_set_drvdata(gen_phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ err = PTR_ERR(phy_provider);
+ dev_err(dev, "failed to register phy-provider\n");
+ goto out;
+ }
+out:
+ return err;
+}
+
+static const struct of_device_id samsung_ufs_phy_match[] = {
+ {
+ .compatible = "samsung,exynos7-ufs-phy",
+ .data = &exynos7_ufs_phy,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
+
+static struct platform_driver samsung_ufs_phy_driver = {
+ .probe = samsung_ufs_phy_probe,
+ .driver = {
+ .name = "samsung-ufs-phy",
+ .of_match_table = samsung_ufs_phy_match,
+ },
+};
+module_platform_driver(samsung_ufs_phy_driver);
+MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
+MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
+MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
new file mode 100644
index 000000000000..5de78710524c
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#ifndef _PHY_SAMSUNG_UFS_
+#define _PHY_SAMSUNG_UFS_
+
+#define PHY_COMN_BLK 1
+#define PHY_TRSV_BLK 2
+#define END_UFS_PHY_CFG { 0 }
+#define PHY_TRSV_CH_OFFSET 0x30
+#define PHY_APB_ADDR(off) ((off) << 2)
+
+#define PHY_COMN_REG_CFG(o, v, d) { \
+ .off_0 = PHY_APB_ADDR((o)), \
+ .off_1 = 0, \
+ .val = (v), \
+ .desc = (d), \
+ .id = PHY_COMN_BLK, \
+}
+
+#define PHY_TRSV_REG_CFG(o, v, d) { \
+ .off_0 = PHY_APB_ADDR((o)), \
+ .off_1 = PHY_APB_ADDR((o) + PHY_TRSV_CH_OFFSET), \
+ .val = (v), \
+ .desc = (d), \
+ .id = PHY_TRSV_BLK, \
+}
+
+/* UFS PHY registers */
+#define PHY_PLL_LOCK_STATUS 0x1e
+#define PHY_CDR_LOCK_STATUS 0x5e
+
+#define PHY_PLL_LOCK_BIT BIT(5)
+#define PHY_CDR_LOCK_BIT BIT(4)
+
+/* description for PHY calibration */
+enum {
+ /* applicable to any */
+ PWR_DESC_ANY = 0,
+ /* mode */
+ PWR_DESC_PWM = 1,
+ PWR_DESC_HS = 2,
+ /* series */
+ PWR_DESC_SER_A = 1,
+ PWR_DESC_SER_B = 2,
+ /* gear */
+ PWR_DESC_G1 = 1,
+ PWR_DESC_G2 = 2,
+ PWR_DESC_G3 = 3,
+ /* field mask */
+ MD_MASK = 0x3,
+ SR_MASK = 0x3,
+ GR_MASK = 0x7,
+};
+
+#define PWR_MODE_HS_G1_ANY PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY)
+#define PWR_MODE_HS_G1_SER_A PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G1_SER_B PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G2_ANY PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY)
+#define PWR_MODE_HS_G2_SER_A PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G2_SER_B PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G3_ANY PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY)
+#define PWR_MODE_HS_G3_SER_A PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G3_SER_B PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B)
+#define PWR_MODE(g, s, m) ((((g) & GR_MASK) << 4) |\
+ (((s) & SR_MASK) << 2) | ((m) & MD_MASK))
+#define PWR_MODE_PWM_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_PWM)
+#define PWR_MODE_HS(g, s) ((((g) & GR_MASK) << 4) |\
+ (((s) & SR_MASK) << 2) | PWR_DESC_HS)
+#define PWR_MODE_HS_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_HS)
+#define PWR_MODE_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_ANY)
+/* PHY calibration point/state */
+enum {
+ CFG_PRE_INIT,
+ CFG_POST_INIT,
+ CFG_PRE_PWR_HS,
+ CFG_POST_PWR_HS,
+ CFG_TAG_MAX,
+};
+
+struct samsung_ufs_phy_cfg {
+ u32 off_0;
+ u32 off_1;
+ u32 val;
+ u8 desc;
+ u8 id;
+};
+
+struct samsung_ufs_phy_drvdata {
+ const struct samsung_ufs_phy_cfg **cfg;
+ struct pmu_isol {
+ u32 offset;
+ u32 mask;
+ u32 en;
+ } isol;
+ bool has_symbol_clk;
+};
+
+struct samsung_ufs_phy {
+ struct device *dev;
+ void __iomem *reg_pma;
+ struct regmap *reg_pmu;
+ struct clk *ref_clk;
+ struct clk *ref_clk_parent;
+ struct clk *tx0_symbol_clk;
+ struct clk *rx0_symbol_clk;
+ struct clk *rx1_symbol_clk;
+ const struct samsung_ufs_phy_drvdata *drvdata;
+ struct samsung_ufs_phy_cfg **cfg;
+ const struct pmu_isol *isol;
+ u8 lane_cnt;
+ int ufs_phy_state;
+ enum phy_mode mode;
+};
+
+static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy)
+{
+ return (struct samsung_ufs_phy *)phy_get_drvdata(phy);
+}
+
+static inline void samsung_ufs_phy_ctrl_isol(
+ struct samsung_ufs_phy *phy, u32 isol)
+{
+ regmap_update_bits(phy->reg_pmu, phy->isol->offset,
+ phy->isol->mask, isol ? 0 : phy->isol->en);
+}
+
+#include "phy-exynos7-ufs.h"
+
+#endif /* _PHY_SAMSUNG_UFS_ */
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread