Devicetree
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Rob Herring <robh@kernel.org>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>,
	Icenowy Zheng <icenowy@aosc.io>,
	Emmanuel Vadot <manu@bidouilliste.com>,
	Heinrich Schuchardt <xypron.glpk@gmx.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com
Subject: [PATCH v2 6/8] arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHz
Date: Wed, 13 Jan 2021 15:26:28 +0000	[thread overview]
Message-ID: <20210113152630.28810-7-andre.przywara@arm.com> (raw)
In-Reply-To: <20210113152630.28810-1-andre.przywara@arm.com>

In contrast to the H6 (and later) manuals, the A64 datasheet does not
specify any limitations in the maximum possible frequency for eMMC
controllers.
However experimentation has found that a 150 MHz limit similar to other
SoCs and also the MMC0 and MMC1 controllers on the A64 seems to exist
for the MMC2 controller.

Limit the frequency for the MMC2 controller to 150 MHz in the SoC .dtsi.
The Pinebook seems to be the an odd exception, since it apparently seems
to work with 200 MHz as well, so overwrite this in its board .dts file.

Tested on a Pine64-LTS: 200 MHz HS-200 fails, 150 MHz HS-200 works.

Fixes: 22be992faea7 ("arm64: allwinner: a64: Increase the MMC max frequency")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 1 +
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi         | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index d07cf05549c3..7ae16541d14f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -167,6 +167,7 @@
 	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
 	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_eldo1>;
+	max-frequency = <200000000>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 19e9b8ca8432..57786fc120c3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -514,7 +514,7 @@
 			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			max-frequency = <200000000>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.17.5


  parent reply	other threads:[~2021-01-13 15:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-13 15:26 [PATCH v2 0/8] arm64: dts: allwinner: Various DT fixes Andre Przywara
2021-01-13 15:26 ` [PATCH v2 1/8] arm64: dts: allwinner: A64: properly connect USB PHY to port 0 Andre Przywara
2021-01-13 15:26 ` [PATCH v2 2/8] arm64: dts: allwinner: H6: " Andre Przywara
2021-01-13 15:26 ` [PATCH v2 3/8] arm64: dts: allwinner: Pine64-LTS: Add status LED Andre Przywara
2021-01-13 17:13   ` Heinrich Schuchardt
2021-01-14 11:48   ` Maxime Ripard
2021-01-13 15:26 ` [PATCH v2 4/8] arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card Andre Przywara
2021-01-13 15:26 ` [PATCH v2 5/8] arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency Andre Przywara
2021-01-13 15:26 ` Andre Przywara [this message]
2021-01-13 15:26 ` [PATCH v2 7/8] arm64: dts: allwinner: Pine64-LTS/SoPine: Enable HS200 eMMC mode Andre Przywara
2021-01-13 15:26 ` [PATCH v2 8/8] arm64: dts: allwinner: Pine H64: " Andre Przywara
2021-01-14  5:04 ` [linux-sunxi] [PATCH v2 0/8] arm64: dts: allwinner: Various DT fixes Chen-Yu Tsai
2021-01-14 11:51 ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210113152630.28810-7-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=icenowy@aosc.io \
    --cc=jernej.skrabec@siol.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=manu@bidouilliste.com \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=wens@csie.org \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox